{"title":"S197 Mustang Exhaust Tips \u0026 Hardware","description":null,"products":[{"product_id":"kooks-multi-layer-stainless-steel-gasket-ford-coyote-voodoo-and-predator-engines-ss-755392","title":"Kooks Multi Layer Stainless Steel Gasket - Ford Coyote, VooDoo and Predator Engines - SS-755392","description":"\u003cp\u003eThe Kooks SS-755392 is a multi-layer stainless steel exhaust gasket designed for Ford's modular V8 engine families, specifically the Coyote, VooDoo, and Predator engines. Kooks is known for its header and exhaust systems, and this gasket gives Mustang owners a replacement sealing component from the same manufacturer.\u003c\/p\u003e\n\u003cp\u003eFor owners of Coyote-powered 5.0L Mustangs, including GT, Boss 302, Bullitt, and Dark Horse models, this gasket is a sensible part to have on hand when an exhaust joint is being serviced, reassembled, or upgraded. Using a fresh gasket during reassembly is standard practice, and the multi-layer stainless steel design is Kooks' chosen construction for this application.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMulti-layer stainless steel gasket construction\u003c\/li\u003e\n\u003cli\u003eKooks part number SS-755392\u003c\/li\u003e\n\u003cli\u003eDesigned for Ford Coyote, VooDoo, and Predator engine families\u003c\/li\u003e\n\u003cli\u003eApplicable to 5.0L Coyote-powered Mustang models\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMulti-Layer Stainless Steel Construction\u003c\/h3\u003e\u003cp\u003eKooks builds the SS-755392 from stainless steel in a multi-layer format rather than as a single sheet. The manufacturer specifies this construction for its Coyote, VooDoo, and Predator engine applications.\u003c\/p\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eProvides a new sealing surface when an exhaust connection on a Coyote 5.0L Mustang is taken apart and reassembled\u003c\/li\u003e\n\u003cli\u003eMulti-layer stainless steel construction as specified by Kooks\u003c\/li\u003e\n\u003cli\u003eSourced from Kooks, a manufacturer of headers and exhaust components for these engines\u003c\/li\u003e\n\u003cli\u003eA single part number covers multiple Ford modular V8 engine families\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2011-2023 Ford Mustang GT (5.0L)\u003c\/li\u003e\n\u003cli\u003e2012-2013 Ford Mustang Boss 302 (5.0L)\u003c\/li\u003e\n\u003cli\u003e2015-2023 Ford Mustang GT (5.0L)\u003c\/li\u003e\n\u003cli\u003e2015 Ford Mustang GT (5.0L)\u003c\/li\u003e\n\u003cli\u003e2019-2020 Ford Mustang Bullitt (5.0L)\u003c\/li\u003e\n\u003cli\u003e2024 Ford Mustang Dark Horse (5.0L)\u003c\/li\u003e\n\u003cli\u003e2024 Ford Mustang Dark Horse (5.0L)\u003c\/li\u003e\n\u003cli\u003e2024 Ford Mustang GT (5.0L)\u003c\/li\u003e\n\u003cli\u003e2024 Ford Mustang GT (5.0L)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Kooks","offers":[{"title":"Default Title","offer_id":68304703717561,"sku":"KSHSS-755392","price":33.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/486edd8392c3f04a4e9ee8bfc77a6d0d_16efc3ea-e404-4c22-9381-88309f782840.jpg?v=1794374983"},{"product_id":"ford-2011-2023-mustang-5-0l-oem-exhaust-manifold-gasket-set","title":"Ford 2011-2023 Mustang 5.0L OEM Exhaust Manifold Gasket Set","description":"\u003cp\u003eThis is a genuine Ford OEM exhaust manifold gasket set for the 5.0L Mustang, covering both the driver and passenger sides of the engine. The gaskets seal the joint where the exhaust manifolds or headers mount to the cylinder heads, and this set comes from Ford rather than an aftermarket supplier.\u003c\/p\u003e\n\u003cp\u003eFord recommends these factory gaskets for anyone installing headers on a 5.0L Mustang. When the manifolds come off for a header swap or other exhaust work, fitting fresh OEM gaskets at the head flange is a sensible step, and this set gives you both sides in one purchase.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eGenuine Ford OEM exhaust manifold gaskets\u003c\/li\u003e\n\u003cli\u003eSet includes both driver side and passenger side gaskets\u003c\/li\u003e\n\u003cli\u003eMade for the 5.0L engine in the Mustang\u003c\/li\u003e\n\u003cli\u003eSuitable for header installations\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGenuine Ford OEM Gaskets\u003c\/h3\u003e\u003cp\u003eThese are the Ford-sourced gaskets used at the exhaust manifold-to-cylinder head joint on the 5.0L Mustang. Choosing the OEM part means the gaskets match the factory sealing surfaces they were designed for, which is why many builders prefer them when reassembling the exhaust side of the engine.\u003c\/p\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eYou are installing headers on a 5.0L Mustang and need new gaskets at the cylinder head flange.\u003c\/li\u003e\n\u003cli\u003eYou want factory Ford gaskets instead of aftermarket alternatives.\u003c\/li\u003e\n\u003cli\u003eBoth the driver and passenger side gaskets come in one set, so you can do both sides of the engine at the same time.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2011-2023 Ford Mustang (5.0L)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDriver side exhaust manifold gasket\u003c\/li\u003e\n\u003cli\u003ePassenger side exhaust manifold gasket\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ford","offers":[{"title":"Default Title","offer_id":68304704962745,"sku":"FMC-111450LEXGKT","price":65.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/fmc-111450lexgkt.jpg?v=1794436016"},{"product_id":"cometic-mls-exhaust-gaskets-pair-2011-2023-mustang-5-0l-2011-2017-f-150-5-0l-c5392-030","title":"Cometic MLS Exhaust Gaskets (Pair) (2011-2023 Mustang 5.0L \/ 2011-2017 F-150 5.0L) - C5392-030","description":"\u003cp\u003eThe Cometic C5392-030 is a pair of MLS (multi-layer steel) exhaust gaskets from Cometic Gasket Automotive, built for the 5.0L Coyote V8 found in 2011-and-later Ford applications. These gaskets seal the joint on the exhaust side of the Coyote engine and are intended for owners who want a dedicated, application-specific replacement rather than a generic universal gasket.\u003c\/p\u003e\n\u003cp\u003eThe set is sold as a pair, which covers both banks of the V8 in one purchase. That makes it a practical part to keep on hand when removing and reinstalling headers or manifolds on a Coyote-powered Mustang, whether during routine service or an exhaust upgrade.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMLS (multi-layer steel) exhaust gasket construction\u003c\/li\u003e\n\u003cli\u003eDesigned specifically for the 2011-and-later 5.0L Coyote V8\u003c\/li\u003e\n\u003cli\u003eSold as a pair to cover both cylinder banks\u003c\/li\u003e\n\u003cli\u003eManufactured by Cometic Gasket Automotive\u003c\/li\u003e\n\u003cli\u003eManufacturer part number C5392-030\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMulti-Layer Steel (MLS) Construction\u003c\/h3\u003e\u003cp\u003eCometic builds the C5392-030 using MLS construction, a layered steel gasket design, rather than a single-layer or composite gasket. Each gasket is made for the 5.0L Coyote exhaust port layout, so it is matched to this engine rather than adapted from a universal pattern.\u003c\/p\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eGives a Coyote-specific replacement whenever the exhaust headers or manifolds are removed\u003c\/li\u003e\n\u003cli\u003eThe pair covers both sides of the 5.0L V8 in a single part number\u003c\/li\u003e\n\u003cli\u003eMLS construction from an established gasket manufacturer, Cometic Gasket Automotive\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2011-2023 Ford Mustang (5.0L)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eTwo MLS exhaust gaskets (one pair)\u003c\/li\u003e\u003c\/ul\u003e","brand":"Cometic Gasket Automotive","offers":[{"title":"Default Title","offer_id":68304943546553,"sku":"CGSC5392-030","price":52.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/C5392-030.jpg?v=1794436053"},{"product_id":"ford-performance-coyote-5-0l-v8-exhaust-manifold-gasket-and-hardware-kit-2011-2023-mustang-gt-f-150-5-0l-m-9448-m50","title":"Ford Performance Coyote 5.0L V8 Exhaust Manifold Gasket \u0026 Hardware Kit (2011-2023 Mustang GT \/ F-150 5.0L) - M-9448-M50","description":"\u003cp\u003eFord Performance part number M-9448-M50 is a complete exhaust manifold gasket and hardware kit built specifically for the 5.0L Coyote V8. It brings together the header gaskets, manifold studs and nuts, exhaust flange gaskets, and mid pipe fasteners needed to seal and secure the exhaust at both the cylinder head and the mid pipe connection, all under one part number.\u003c\/p\u003e\n\u003cp\u003eThe kit is aimed at enthusiasts installing aftermarket headers, or anyone who wants a full replacement set of manifold sealing components and fasteners for a Coyote-powered vehicle, including the 2011-2023 Mustang GT. The header gaskets are the same type Ford Performance used on its 2016 Cobra Jet race car. The kit is intended for Coyote 5.0L engines only and is not a match for Ford's other engine families.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFord Performance part number M-9448-M50\u003c\/li\u003e\n\u003cli\u003eDesigned exclusively for 5.0L Coyote V8 engines\u003c\/li\u003e\n\u003cli\u003eTwo exhaust manifold (header) gaskets, the same style used on the 2016 Cobra Jet race car\u003c\/li\u003e\n\u003cli\u003eSixteen exhaust manifold studs paired with sixteen exhaust manifold nuts\u003c\/li\u003e\n\u003cli\u003eTwo exhaust flange gaskets\u003c\/li\u003e\n\u003cli\u003eFour mid pipe studs\u003c\/li\u003e\n\u003cli\u003eFour mid pipe nuts for the manifold side and four mid pipe nuts for the mid pipe side\u003c\/li\u003e\n\u003cli\u003eCovers both the cylinder head and mid pipe joints in a single kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCobra Jet Header Gaskets and Complete Coyote Hardware\u003c\/h3\u003e\u003cp\u003eThe centerpiece of this kit is a pair of exhaust manifold gaskets of the type Ford Performance specified for the 2016 Cobra Jet race car, giving builders a gasket with factory racing lineage for sealing headers to Coyote cylinder heads.\u003c\/p\u003e\u003cp\u003eRather than leaving you to reuse old fasteners or piece together hardware from several sources, Ford Performance supplies a full set of manifold studs and nuts along with the flange gaskets and dedicated mid pipe studs and nuts. The mid pipe nuts are provided separately for the manifold side and the mid pipe side of the connection.\u003c\/p\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSwapping to aftermarket headers on a Coyote 5.0L calls for fresh gaskets and hardware, and this kit supplies them together.\u003c\/li\u003e\n\u003cli\u003eReplacing all sixteen manifold studs and nuts at once avoids reusing fasteners that have been through repeated heat cycles.\u003c\/li\u003e\n\u003cli\u003eIncludes the flange gaskets and mid pipe hardware, so the downstream connection can be resealed during the same job.\u003c\/li\u003e\n\u003cli\u003eHeader gaskets are the same type used on the 2016 Cobra Jet race car.\u003c\/li\u003e\n\u003cli\u003eA single Ford Performance part number simplifies ordering compared with sourcing individual gaskets and fasteners.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2011-2023 Ford Mustang GT (5.0L)\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment notes:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eWill NOT fit EcoBoost (2\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2 x Exhaust manifold (header) gasket, as used on the 2016 Cobra Jet race car\u003c\/li\u003e\n\u003cli\u003e16 x Exhaust manifold stud\u003c\/li\u003e\n\u003cli\u003e16 x Exhaust manifold nut\u003c\/li\u003e\n\u003cli\u003e2 x Exhaust flange gasket\u003c\/li\u003e\n\u003cli\u003e4 x Mid pipe stud\u003c\/li\u003e\n\u003cli\u003e4 x Mid pipe nut (manifold side)\u003c\/li\u003e\n\u003cli\u003e4 x Mid pipe nut (mid pipe side)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ford Performance Parts","offers":[{"title":"Default Title","offer_id":68305177542841,"sku":"FRPM-9448-M50","price":79.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/M-9448-M50_V1_3.jpg?v=1794436065"},{"product_id":"mahle-original-11-15-ford-f150-mustang-5-0l-exhaust-manifold-set","title":"MAHLE Original 11-15 Ford F150 \/ Mustang 5.0L Exhaust Manifold Set","description":"\u003cp\u003eThis MAHLE Original exhaust manifold set is a service part for Ford's 5.0L V8, the engine shared by the Mustang and the F-150 in this era. The supplier catalogs it under exhaust gaskets, so it is intended for the manifold-to-cylinder-head joint, a common service point when headers or manifolds are removed, replaced, or resealed.\u003c\/p\u003e\n\u003cp\u003eMAHLE Original is the replacement-parts line from MAHLE, and this set comes through its Victor Reinz gasket brand. For owners of 5.0L Mustang GT, Boss 302, Bullitt, and related models, as well as 5.0L F-150 trucks, it is a branded option for restoring the exhaust seal at the manifolds during routine maintenance or as part of an exhaust upgrade.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMAHLE Original branded part, listed under the Victor Reinz manufacturer name\u003c\/li\u003e\n\u003cli\u003eDesigned for the Ford 5.0L V8\u003c\/li\u003e\n\u003cli\u003eSupplied as a set\u003c\/li\u003e\n\u003cli\u003eCataloged as an exhaust gasket component for the exhaust manifold location\u003c\/li\u003e\n\u003cli\u003eApplications span both Ford Mustang and Ford F-150 5.0L platforms\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eProvides a branded MAHLE Original replacement part for the exhaust manifold area of the Ford 5.0L V8\u003c\/li\u003e\n\u003cli\u003eUseful when removing or reinstalling manifolds or headers, a job where the sealing surfaces are typically serviced\u003c\/li\u003e\n\u003cli\u003eOne part number covers 5.0L applications in both the Mustang and F-150 lines\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2012-2013 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e2019-2020 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e2011-2020 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e2015 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e2015-2020 Ford Mustang\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Victor Reinz","offers":[{"title":"Default Title","offer_id":68305997201593,"sku":"VICMS19953","price":49.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/ddb7b13956747018777e5adb1757f237_fa05e8ac-af26-4f89-85ae-eb3390f211be.jpg?v=1794436133"},{"product_id":"bbk-rear-o2-extensions-12in-pair-2011-2017-mustang-gt-and-v6-1110","title":"BBK Rear O2 Extensions - 12In (Pair) (2011-2017 Mustang GT \u0026 V6) - 1110","description":"\u003cp\u003eBBK Performance Parts part number 1110 is a pair of 12-inch rear O2 sensor wire harness extensions for 2011-2017 Mustang GT and V6 models. Long tube headers move the oxygen sensors from their factory positions, and this applies to every long tube design, including those from other manufacturers. As a result, the stock sensor wiring often no longer reaches. These extensions add length between the sensor and the factory harness so the relocated sensors can be connected properly after a full-length header install.\u003c\/p\u003e\n\u003cp\u003eEach extension has OEM-style factory connectors on both ends, so it plugs directly into the stock wiring without cutting or splicing the factory harness. Heat protective sleeving covers the wiring, and BBK states the extensions work with both 3-wire and 4-wire sensor applications. If you are planning a long tube header swap on an S197 or S550 Mustang, this pair handles the sensor relocation while keeping the factory harness intact.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e12-inch O2 sensor wire harness extensions\u003c\/li\u003e\n\u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003cli\u003eDesigned for O2 sensor relocation required by long tube (full-length) headers, including headers from other manufacturers\u003c\/li\u003e\n\u003cli\u003eOEM factory-style connectors on the wiring ends for direct plug-in to the factory harness\u003c\/li\u003e\n\u003cli\u003eNo splicing of the factory wire harness required\u003c\/li\u003e\n\u003cli\u003eHeat protective sleeves on the wiring\u003c\/li\u003e\n\u003cli\u003eCompatible with 3-wire and 4-wire O2 sensor applications\u003c\/li\u003e\n\u003cli\u003eBBK part number 1110\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eOEM-Style Connectors with Heat Protective Sleeving\u003c\/h3\u003e\u003cp\u003eBBK uses factory-style OEM connectors on these extensions so they mate with the Mustang's original sensor wiring the same way the stock components do. Because the connection is plug-and-play, the factory harness stays unaltered, with no cut wires or spliced joints that could fail or become hard to diagnose later.\u003c\/p\u003e\u003cp\u003eThe wiring is wrapped in heat protective sleeves, which matters because the extended leads run close to the headers and exhaust once the sensors have been relocated.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eExtensions plug directly into the factory wire harness using OEM-style connectors\u003c\/li\u003e\n\u003cli\u003eNo splicing or cutting of the factory harness is required\u003c\/li\u003e\n\u003cli\u003eSome connectors may need their small directional location tabs removed before they will click into place\u003c\/li\u003e\n\u003cli\u003eIntended for use when installing long tube (full-length) headers, which relocate the O2 sensors\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLong tube headers relocate the O2 sensors, so the factory sensor wiring may not reach without an extension\u003c\/li\u003e\n\u003cli\u003ePlug-in connectors keep the factory harness intact, which helps if you ever return to stock headers\u003c\/li\u003e\n\u003cli\u003eHeat protective sleeving shields the added wiring near hot exhaust components\u003c\/li\u003e\n\u003cli\u003eWorks with both 3-wire and 4-wire sensor applications\u003c\/li\u003e\n\u003cli\u003eComes as a pair of 12-inch extensions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2011-2017 Ford Mustang V6 \/ GT\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eTwo 12-inch O2 sensor wire harness extensions (sold as a pair)\u003c\/li\u003e\u003c\/ul\u003e","brand":"BBK Performance Parts","offers":[{"title":"Default Title","offer_id":68306067587257,"sku":"BBK1110","price":69.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/1110_1.jpg?v=1794430589"},{"product_id":"fel-pro-11-14-ford-f-150-11-17-mustang-00-05-mitsubishi-eclipse-exhaust-pipe-flange-gasket","title":"Fel-Pro 11-14 Ford F-150\/11-17 Mustang\/00-05 Mitsubishi Eclipse Exhaust Pipe Flange Gasket","description":"\u003cp\u003eThis Fel-Pro exhaust pipe flange gasket seals the connection at an exhaust pipe flange, keeping exhaust gases inside the system where they belong. Fel-Pro builds its gaskets for the repair environment, meaning they are intended to work on real vehicles with real-world wear rather than only on fresh factory surfaces. The listing names Ford Mustang applications from the 2011 through 2017 model years, along with a range of other Ford, Lincoln, Mazda, Mercury, Chrysler, Dodge, and Mitsubishi vehicles.\u003c\/p\u003e\n\u003cp\u003eFor Mustang owners replacing a leaking flange joint or reassembling the exhaust after other work, a fresh gasket is the right way to restore the seal. Fel-Pro states that this gasket is designed to handle imperfect sealing surfaces and is made with proprietary materials, which makes it a practical choice when the mating flanges are not in perfect condition.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eExhaust pipe flange gasket from Fel-Pro\u003c\/li\u003e\n\u003cli\u003eEngineered specifically for the repair environment\u003c\/li\u003e\n\u003cli\u003eDesigned to seal on imperfect sealing surfaces\u003c\/li\u003e\n\u003cli\u003eManufactured with Fel-Pro proprietary materials\u003c\/li\u003e\n\u003cli\u003eIntended to provide a reliable seal on difficult applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eRepair-Focused Fel-Pro Gasket Design\u003c\/h3\u003e\u003cp\u003eFel-Pro develops its gaskets around the conditions found during service and repair work rather than ideal assembly-line conditions. This gasket is designed to accommodate sealing surfaces that are less than perfect, which is common on exhaust flanges that have seen years of heat cycling and corrosion.\u003c\/p\u003e\u003cp\u003eThe gasket is produced from proprietary materials developed by Fel-Pro. The manufacturer positions these materials as part of its approach to delivering dependable sealing on applications known to be troublesome.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eA properly sealed exhaust flange keeps exhaust gases contained within the system. Fel-Pro states that this gasket is built to deliver a reliable seal even on challenging applications, supporting a leak-free joint at the exhaust pipe flange.\u003c\/p\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eReplaces a worn or leaking gasket at the exhaust pipe flange\u003c\/li\u003e\n\u003cli\u003eDesigned to seal even when flange surfaces are not in perfect condition\u003c\/li\u003e\n\u003cli\u003eMade by Fel-Pro with proprietary materials developed for repair work\u003c\/li\u003e\n\u003cli\u003eA sensible part to replace whenever the flange joint is separated for service\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2011-2017 Ford Mustang\u003c\/li\u003e\u003c\/ul\u003e","brand":"Fel-Pro","offers":[{"title":"Default Title","offer_id":68306070208697,"sku":"FEL61236","price":7.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/94ff747587c474dddcfbf107668bfd46L.jpg?v=1794436142"},{"product_id":"bbk-premium-header-gasket-set-mustang-5-0-coyote-2011-2017-pair-up-to-1-7-8-premium-5-0-4v-1410","title":"BBK Premium Header Gasket Set- Mustang 5.0 Coyote 2011-2017  (Pair) Up To 1-7\/8\" (PREMIUM 5.0\/4V) - 1410","description":"\u003cp\u003eThe BBK Premium Header Gasket Set, part number 1410, is a pair of steel-reinforced graphite gaskets for the Coyote 5.0L V8. They seal the joint between the cylinder head exhaust ports and the header flanges. The listing designates the set for applications up to 1-7\/8 inch. BBK built these gaskets to stop exhaust leaks at the head and to reduce the chance of a gasket blowing out under the heat and pressure of the exhaust.\u003c\/p\u003e\n\u003cp\u003eThese gaskets are meant for 2011-2017 Mustang GT and Boss 302 owners running aftermarket headers. BBK designed them as an exact match for its own headers, and they also work with most other brands of tubular header. They suit a new header install, or a car that has developed a ticking leak at the flange and needs a durable replacement seal.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePremium steel-reinforced graphite construction designed to resist blow-out\u003c\/li\u003e\n\u003cli\u003eGraphite-coated, high-temperature facing material\u003c\/li\u003e\n\u003cli\u003eSold as a pair, one gasket for each cylinder head\u003c\/li\u003e\n\u003cli\u003eListed for header applications up to 1-7\/8 inch\u003c\/li\u003e\n\u003cli\u003eDesigned for Coyote 5.0L engines equipped with aftermarket headers\u003c\/li\u003e\n\u003cli\u003eExact match to BBK headers and compatible with most other brands of tubular header\u003c\/li\u003e\n\u003cli\u003eBBK part number 1410\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSteel-Reinforced Graphite Construction\u003c\/h3\u003e\u003cp\u003eEach gasket has a steel reinforcement inside a graphite body. The steel core gives the gasket structure and helps it resist blowing out at the header flange, which is a common failure point with weaker gasket materials.\u003c\/p\u003e\u003cp\u003eThe sealing surfaces have a graphite-coated facing rated for high temperatures. This facing helps the gasket maintain a secure, long-lasting seal against the cylinder head and header flange as the exhaust heats and cools.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eA sound header-to-head seal keeps exhaust gas inside the system instead of letting it escape at the ports. BBK designed this set to stop leaks before they start and to reduce the risk of a blown gasket, so the headers can do their job without a leak at the source.\u003c\/p\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eReplaces leaking header gaskets on a Coyote 5.0L running aftermarket headers\u003c\/li\u003e\n\u003cli\u003eSteel reinforcement is designed to resist the blow-outs that can affect lesser gaskets\u003c\/li\u003e\n\u003cli\u003eHigh-temperature graphite-coated facing supports a durable, long-lasting seal\u003c\/li\u003e\n\u003cli\u003eMatched to BBK headers and compatible with most other tubular headers\u003c\/li\u003e\n\u003cli\u003eSupplied as a pair, so both sides can be done at the same time\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2011-2017 Ford Mustang Boss 302 \/ GT (5.0L)\u003c\/li\u003e\n\u003cli\u003e2011-2017 Ford Mustang Boss 302 \/ GT (5.0L)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eTwo header gaskets (one pair)\u003c\/li\u003e\u003c\/ul\u003e","brand":"BBK Performance Parts","offers":[{"title":"Default Title","offer_id":68306132992185,"sku":"BBK1410","price":49.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/1410_1.jpg?v=1794430600"},{"product_id":"mahle-original-11-15-ford-mustang-5-0l-coyote-catalytic-converter-gasket","title":"MAHLE Original 11-15 Ford Mustang 5.0L Coyote Catalytic Converter Gasket","description":"\u003cp\u003eThis MAHLE Original catalytic converter gasket is a replacement exhaust gasket for the 2011-2015 Ford Mustang equipped with the 5.0L Coyote V8. It seals the catalytic converter connection in the exhaust system, a joint that is commonly disturbed whenever converters, mid-pipes, or other exhaust components are removed or replaced.\u003c\/p\u003e\n\u003cp\u003eFor owners who handle their own exhaust work on a Coyote-powered Mustang GT, having the correct catalytic converter gasket on hand is a basic part of reassembling the system properly. This part is specific to the 5.0L Coyote application rather than a universal-fit piece.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMAHLE Original catalytic converter gasket\u003c\/li\u003e\n\u003cli\u003eApplication-specific to the 5.0L Coyote V8\u003c\/li\u003e\n\u003cli\u003eIntended for 2011-2015 Ford Mustang models\u003c\/li\u003e\n\u003cli\u003eExhaust gasket for the catalytic converter connection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eProvides a new gasket for the catalytic converter joint when that connection is taken apart during exhaust service\u003c\/li\u003e\n\u003cli\u003eMade for the 5.0L Coyote Mustang application, so there is no need to adapt a generic gasket\u003c\/li\u003e\n\u003cli\u003eA practical part to have ready when replacing catalytic converters, mid-pipes, or related exhaust components on a 2011-2015 Mustang GT\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2011-2015 Ford Mustang GT (5.0L)\u003c\/li\u003e\u003c\/ul\u003e","brand":"Victor Reinz","offers":[{"title":"Default Title","offer_id":68306343166137,"sku":"VICF32734","price":24.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/ddb7b13956747018777e5adb1757f237_c10a1999-e899-4b1b-b72e-17f6f7b97e77.jpg?v=1794436219"},{"product_id":"cometic-gasket-ford-5-0l-5-2l-gen-1-coyote-modular-v8-intake-manifold-gasket-set-2011-2014-f-150-2011-2018-mustang-c15444","title":"Cometic Gasket Ford 5.0L\/5.2L Gen-1 Coyote Modular V8 Intake Manifold Gasket Set (2011-2014 F-150,2011-2018 Mustang) - C15444","description":"\u003cp\u003eCometic utlizes their in-house dynamometersand engine assembly rooms to ensure quality and reliability\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAll of Cometic's gaskets and seals have been tested on both the street and the track as well as vigorous Dyno shakedowns\u003c\/li\u003e\n\u003cli\u003eApplication Specific Design\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2011-2018 Ford Mustang\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003ePart Number\u003c\/h3\u003e\u003cp\u003eC15444\u003c\/p\u003e","brand":"Cometic Gasket Automotive","offers":[{"title":"Default Title","offer_id":68327205535929,"sku":"CGSC15444","price":30.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/21eab811c5d45f0ebb581a8f4b39d3e6L.jpg?v=1794520579"},{"product_id":"fel-pro-11-17-ford-mustang-18-20-f-150-13-19-explorer-engine-intake-manifold-gasket-set","title":"Fel-Pro 11-17 Ford Mustang\/18-20 F-150\/13-19 Explorer Engine Intake Manifold Gasket Set","description":"\u003cp\u003eFel-Pro(R) gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSEALING TECHNOLOGIES -- Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair\u003c\/li\u003e\n\u003cli\u003eDESIGNED FOR IMPERFECT SEALING SURFACES -- Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces\u003c\/li\u003e\n\u003cli\u003eENGINEERING EXPERTISE -- Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development\u003c\/li\u003e\n\u003cli\u003eEVERY PART FOR THE REPAIR -- Fel-Pro gasket sets include every part needed for the repair unless otherwise noted\u003c\/li\u003e\n\u003cli\u003eREAL-WORLD TESTED -- Parts are tested on-vehicle and validated to ensure optimal performance on the road\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2011-2014 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e2015-2017 Ford Mustang\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePart Number\u003c\/h3\u003e\u003cp\u003eMS971181\u003c\/p\u003e","brand":"Fel-Pro","offers":[{"title":"Default Title","offer_id":68327206486201,"sku":"FELMS971181","price":62.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/3e882d67d81cb90c5e22c0dc4d292b20L.jpg?v=1794520628"},{"product_id":"cometic-11-14-ford-f150-mustang-5-0l-gen-1-coyote-modular-v8-valve-cover-gasket-set","title":"Cometic 11-14 Ford F150\/Mustang 5.0L Gen-1 Coyote Modular V8 Valve Cover Gasket Set","description":"\u003cp\u003eCOMETIC Valve Cover Gaskets are manufactured from a soft durometer rubber wrapped around a steel torque limiting frame. Our valve cover gaskets offer unparalleled sealing and extended reusability. This design surpasses the quality and ability of a typical cork or paper gasket. The rubber and steel combination will withstand blowing out, over tightening, and high amounts of vacuum.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eSteel Torque Limiting Frame\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2011-2014 Ford Mustang GT (5.0L)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003ePart Number\u003c\/h3\u003e\u003cp\u003eC15576\u003c\/p\u003e","brand":"Cometic Gasket","offers":[{"title":"Default Title","offer_id":68407765401785,"sku":"C15576","price":108.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/c39c7ca47f41d0fe25b6f3db4c22debcL.jpg?v=1794729208"}],"url":"https:\/\/engmustangs.com\/collections\/s197-exhaust-tips-hardware.oembed","provider":"ENG Mustangs","version":"1.0","type":"link"}