{"title":"Mustang Headers","description":null,"products":[{"product_id":"afe-twisted-steel-409-stainless-steel-short-tube-header-ford-mustang-11-17-v6-3-7l-48-43031","title":"AFE Twisted Steel 409 Stainless Steel Short Tube Header (Ford Mustang 11-17 V6-3.7L) - 48-43031","description":"\u003cp\u003eThe aFe Twisted Steel shorty header replaces the factory exhaust manifolds on the 2011-2017 Ford Mustang V6 with the 3.7L engine. It is built from mandrel-bent 409 stainless steel tubing and designed as a direct bolt-on, with no cutting or modifications.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer-stated gains:\u003c\/strong\u003e Up to +14 horsepower and +15 lb-ft of torque, as measured by aFe on its in-house dyno.\u003c\/p\u003e\n\u003cp\u003eaFe dyno-tested this header on its in-house dyno, and it is a strong choice for V6 owners who want more power and sharper throttle response from a part that fits like factory equipment.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eUp to +14 hp and +15 lb-ft of torque (aFe in-house dyno)\u003c\/li\u003e\n\u003cli\u003e1-5\/8-inch mandrel-bent 409 stainless steel primary tubing\u003c\/li\u003e\n\u003cli\u003e3-to-1 mitered merge collectors to reduce turbulence and increase exhaust velocity\u003c\/li\u003e\n\u003cli\u003eFactory-style laser-cut, machined mild steel flanges for a leak-free seal\u003c\/li\u003e\n\u003cli\u003e100% MIG-welded construction\u003c\/li\u003e\n\u003cli\u003eDesigned with computer-aided design for high-tolerance, factory-style fitment\u003c\/li\u003e\n\u003cli\u003eManufacturer part number 48-43031\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e409 Stainless Steel Construction\u003c\/h3\u003e\u003cp\u003eThe primaries are 1-5\/8-inch mandrel-bent 409 stainless steel tubing, chosen by aFe for strength and durability. Factory-style laser-cut and machined mild steel flanges seal securely against the cylinder heads.\u003c\/p\u003e\u003cp\u003eEvery joint is 100% MIG-welded, and the header was designed with computer-aided design for close, factory-style fitment.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eaFe's 3-to-1 mitered merge collectors reduce turbulence and increase exhaust velocity. aFe reports gains of up to 14 horsepower and 15 lb-ft of torque on its in-house dyno, along with improved throttle response.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDirect bolt-on design\u003c\/li\u003e\n\u003cli\u003eNo cutting or modifications required\u003c\/li\u003e\n\u003cli\u003eGaskets and lower outlet hardware are included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMeasurable power and torque gains for the 3.7L V6\u003c\/li\u003e\n\u003cli\u003eImproved throttle response\u003c\/li\u003e\n\u003cli\u003eBolt-on fitment without cutting or modifying the vehicle\u003c\/li\u003e\n\u003cli\u003eDurable 409 stainless construction\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2011-2017 Ford Mustang V6 (3.7L)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eShorty header system\u003c\/li\u003e\n\u003cli\u003eGaskets\u003c\/li\u003e\n\u003cli\u003eLower outlet hardware\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"aFe","offers":[{"title":"Default Title","offer_id":68304222617785,"sku":"AFE48-43031","price":511.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/48-43031_1.jpg?v=1794370745"},{"product_id":"long-tube-headers-t304ss-2-x-3-equal-length-long-tube-headers-only-titan-finish-2024-2026-mustang-gt-fdlh00068t","title":"Long Tube Headers T304SS 2\" x 3\" Equal Length Long Tube Headers Only - Titan Finish (2024-2026 Mustang GT) - FDLH00068T","description":"\u003cp\u003eThese LTH Equal Length Long Tube Headers replace the factory headers on the 2024-2026 Ford Mustang GT with the 5.0L Coyote engine. They use 2.00-inch primaries with a 3-inch collector and are built from 18-gauge 304 stainless steel with LTH's Titan finish.\u003c\/p\u003e\n\u003cp\u003eThe factory headers on the 2024+ GT are designed to suppress sound, which also restricts flow. These long tubes are developed for the best balance of low-end and top-end power, with a factory bolt-in design.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eEqual-length long tube design\u003c\/li\u003e\n\u003cli\u003e2.00-inch primaries, 3-inch collectors\u003c\/li\u003e\n\u003cli\u003e18-gauge 304 stainless steel\u003c\/li\u003e\n\u003cli\u003eTitan finish: matte appearance with added durability\u003c\/li\u003e\n\u003cli\u003eFactory bolt-in; modular design works with factory components\u003c\/li\u003e\n\u003cli\u003eDeveloped for the best balance of low-end and top-end power\u003c\/li\u003e\n\u003cli\u003eManufactured in-house in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e304 Stainless Steel with Titan Finish\u003c\/h3\u003e\u003cp\u003eLTH builds these headers in-house in the USA from 18-gauge 304 stainless steel. The exclusive Titan finish gives them an all-over matte look and added durability.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eReplacing the restrictive factory headers with equal-length long tubes restores exhaust flow and power. LTH designed these for the best balance of low-end and top-end power.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFactory bolt-in design\u003c\/li\u003e\n\u003cli\u003eThe A\/C bolt must be trimmed so the header sits flush with the cylinder heads\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRemoves the factory header restriction on the 2024+ Mustang GT\u003c\/li\u003e\n\u003cli\u003eBalanced low-end and top-end power\u003c\/li\u003e\n\u003cli\u003eDurable 304 stainless with a matte Titan finish\u003c\/li\u003e\n\u003cli\u003eBacked by a lifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2024-2026 Ford Mustang GT\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eLong tube headers\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot included:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eConnection pipes (this is the headers-only kit)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eLifetime warranty.\u003c\/p\u003e","brand":"LTH Headers","offers":[{"title":"Default Title","offer_id":68304223731897,"sku":"LTH-FDLH00068T","price":1695.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/LTH-GT350-Headers-06_a1fc5cde-9dfd-4afb-a21c-dc09d76df91b.png?v=1794430314"},{"product_id":"kooks-1-7-8-x-3-ss-headers-only-2015-2026-mustang-gt-5-0l-11512402","title":"Kooks 1-7\/8\" x 3\" SS Headers ONLY 2015-2026 Mustang GT 5.0L. - 11512402","description":"\u003cp\u003eKooks part number 11512402 is a set of 304 stainless steel long tube headers for the 5.0L Coyote-powered Mustang GT. Their 1-7\/8 x 3-inch sizing pairs 1-7\/8-inch mandrel-bent primary tubes with 3-inch collectors. Each header bolts to the cylinder head through a 3\/8-inch laser-cut flange with round ports machined to the factory bolt pattern.\u003c\/p\u003e\n\u003cp\u003eThis is a headers-only package intended for owners assembling a long tube system to their own specification. It ships with gaskets and oxygen sensor extension harnesses for both early and later model years. To finish the installation you will need Kooks front connection pipes with OEM adapters, or a Kooks X-pipe or H-pipe exhaust. If you would rather buy everything at once, Kooks also sells this header within its Header and Connection Kits, part numbers 1151H411, 1151H421, and 1151H431.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLong tube header design for the Mustang GT 5.0L 4V\u003c\/li\u003e\n\u003cli\u003eManufacturer part number 11512402\u003c\/li\u003e\n\u003cli\u003e304 stainless steel construction\u003c\/li\u003e\n\u003cli\u003e1-7\/8-inch mandrel-bent primary tubes\u003c\/li\u003e\n\u003cli\u003e1-7\/8 x 3-inch header sizing (3-inch collector)\u003c\/li\u003e\n\u003cli\u003e3\/8-inch thick laser-cut head flanges\u003c\/li\u003e\n\u003cli\u003eRound port flange design\u003c\/li\u003e\n\u003cli\u003eRetains the stock bolt pattern\u003c\/li\u003e\n\u003cli\u003eShips with 755392 gaskets and oxygen sensor extension harnesses covering 2015-2017 and 2018-and-later model years\u003c\/li\u003e\n\u003cli\u003eHeaders only; connection pipes or an X-pipe\/H-pipe exhaust are required to complete the system\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e304 Stainless Steel Construction with 3\/8-Inch Laser-Cut Flanges\u003c\/h3\u003e\u003cp\u003eKooks fabricates these headers from 304 stainless steel, an alloy commonly specified for exhaust components because it resists corrosion.\u003c\/p\u003e\u003cp\u003eThe head flanges are 3\/8 inch thick and laser cut, with round ports and the factory bolt pattern. Because the bolt pattern matches stock, the headers mount to the cylinder heads in the same locations as the original exhaust manifolds.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eEach 1-7\/8-inch primary tube is mandrel bent, a forming process that holds the tube at its full diameter through the bends. The primaries feed into 3-inch collectors. Kooks does not state horsepower, torque, or sound figures for this header on its own.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eGaskets (Kooks 755392) are supplied with the headers.\u003c\/li\u003e\n\u003cli\u003eFor 2015-2017 cars, a single CAS-105979 extension harness is provided to lengthen the oxygen sensor wiring.\u003c\/li\u003e\n\u003cli\u003eFor 2018 and later cars, two CAS-104677-5PIN five-pin oxygen sensor extension harnesses are provided.\u003c\/li\u003e\n\u003cli\u003eBolt kits BK101 and BK107 are required for installation.\u003c\/li\u003e\n\u003cli\u003eThe headers mount to the cylinder heads using the factory bolt pattern.\u003c\/li\u003e\n\u003cli\u003eCompleting the exhaust requires Kooks front connection pipes with OEM adapters, or a Kooks X-pipe or H-pipe exhaust.\u003c\/li\u003e\n\u003cli\u003eKooks also offers this header bundled with connection hardware as Header and Connection Kit part numbers 1151H411, 1151H421, and 1151H431.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eYou want a stainless long tube header for your 5.0L Mustang GT and plan to choose your own connection pipes or mid-pipe.\u003c\/li\u003e\n\u003cli\u003eYou want 304 stainless construction and 3\/8-inch laser-cut flanges that use the stock bolt pattern.\u003c\/li\u003e\n\u003cli\u003eYou prefer 1-7\/8-inch mandrel-bent primaries with 3-inch collectors.\u003c\/li\u003e\n\u003cli\u003eOxygen sensor extension harnesses for both early and later model years come in the box, so you do not need to source them separately.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2015-2026 Ford Mustang GT (5.0L)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLong tube headers, 1-7\/8 x 3-inch, 304 stainless steel (part number 11512402)\u003c\/li\u003e\n\u003cli\u003e755392 gaskets\u003c\/li\u003e\n\u003cli\u003eOne CAS-105979 oxygen sensor extension harness, used on 2015-2017 model years\u003c\/li\u003e\n\u003cli\u003eTwo CAS-104677-5PIN oxygen sensor extension harnesses, used on 2018-and-later model years\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot included:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eKooks front connection pipes and OEM adapters\u003c\/li\u003e\n\u003cli\u003eX-pipe or H-pipe exhaust\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Kooks","offers":[{"title":"Default Title","offer_id":68304694771897,"sku":"KOO-11512402","price":1202.92,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/86d751943df544f186f924e4ffa968ce_e843219a-0ef0-4c6d-8901-b89a5292a74b.png?v=1794430311"},{"product_id":"kooks-full-3-stainless-steel-connection-adapter-2015-2026-mustang-gt-5-0l-part-11513010","title":"Kooks Full 3\" Stainless Steel Connection Adapter (2015–2026 Mustang GT 5.0L) – Part #11513010","description":"\u003cp\u003eThe Kooks Full 3\" Stainless Steel Connection Adapter, part number 11513010, joins Kooks headers or mid-pipes to a stock or stock-style rear exhaust on the 5.0L Mustang GT. It is fabricated from T304 stainless steel and keeps a full 3\" diameter through the transition, so the larger aftermarket piping does not have to neck down where it meets the cat-back.\u003c\/p\u003e\n\u003cp\u003eThis adapter is aimed at owners who have installed Kooks full 3\" long tube headers or mid-pipes but have not yet replaced the cat-back, and at anyone upgrading the exhaust in stages or replacing only part of the system. It addresses the mismatched connection points between those parts. Kooks notes that if you plan to run a complete Kooks system, a full cat-back is the better route and this adapter is not needed.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFull 3\" diameter maintained through the adapter to avoid stepping down to stock pipe sizing\u003c\/li\u003e\n\u003cli\u003eT304 stainless steel construction for corrosion resistance on street or track cars\u003c\/li\u003e\n\u003cli\u003eMandrel-bent transitions with smooth internal surfaces to reduce turbulence\u003c\/li\u003e\n\u003cli\u003eDesigned to mate Kooks full 3\" headers or mid-pipes with stock or stock-style cat-back systems\u003c\/li\u003e\n\u003cli\u003eFixed design with no adjustability\u003c\/li\u003e\n\u003cli\u003eHelps keep pipe diameter consistent for exhaust scavenging; weight savings are minimal\u003c\/li\u003e\n\u003cli\u003eNo tuning or calibration required\u003c\/li\u003e\n\u003cli\u003eKooks part number 11513010\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eT304 Stainless Steel, Mandrel-Bent Construction\u003c\/h3\u003e\u003cp\u003eKooks builds this adapter from T304 stainless steel, a material chosen for its resistance to corrosion under both daily driving and track use. Compared with mass-produced factory adapters, the manufacturer states the stainless construction gives a tighter seal and better durability at the joint.\u003c\/p\u003e\u003cp\u003eThe transitions are mandrel bent, which keeps the internal surfaces smooth and the pipe diameter consistent through each bend. The adapter is a fixed piece rather than an adjustable one, so it is intended to locate the connection in a set position between the Kooks components and the rear exhaust.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eBy carrying a full 3\" diameter from the Kooks headers or mid-pipes to the rear section, the adapter removes the restriction created when larger aftermarket piping is forced down to stock sizing. Kooks states the smooth mandrel-bent internals reduce turbulence and that the consistent diameter supports exhaust scavenging.\u003c\/p\u003e\u003cp\u003eKooks describes the weight savings from this part as minimal; its main purpose is a properly sealed, unrestricted connection between performance and stock-style components.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eKooks states it installs without modification when pairing Kooks headers or mid-pipes with a factory or factory-style cat-back\u003c\/li\u003e\n\u003cli\u003eCorrect alignment with your existing exhaust system is required\u003c\/li\u003e\n\u003cli\u003eNo tuning or calibration is needed\u003c\/li\u003e\n\u003cli\u003eProfessional installation is recommended if you are not experienced with exhaust fitment and sealing\u003c\/li\u003e\n\u003cli\u003eNot compatible with every aftermarket system; it is intended for Kooks full 3\" headers or mid-pipes used with stock or stock-style cat-backs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eYou have Kooks full 3\" long tube headers or mid-pipes and are still running a stock or stock-style cat-back\u003c\/li\u003e\n\u003cli\u003eIt resolves mismatched connection points between the aftermarket front section and the rear exhaust\u003c\/li\u003e\n\u003cli\u003eIt keeps a full 3\" path rather than reducing to stock pipe size at the joint\u003c\/li\u003e\n\u003cli\u003eT304 stainless construction suits both daily-driven and track cars\u003c\/li\u003e\n\u003cli\u003eIt lets you build or upgrade the exhaust in stages without replacing the entire system at once\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2015-2026 Ford Mustang GT (5.0L)\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment notes:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003enot compatible with all aftermarket systems\u003c\/li\u003e\n\u003cli\u003eWill not fit GT350, GT500, or EcoBoost models\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Kooks","offers":[{"title":"Default Title","offer_id":68304696508601,"sku":"KOO-11513010","price":56.92,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/0f6968d2ad301b42d6d3924d660d74b6_c773f5e0-1d78-4547-881e-290da4905b7b.png?v=1794374965"},{"product_id":"kooks-1-7-8-ss-headers-and-catted-connection-kit-2015-2026-mustang-gt-5-0l-1151h422","title":"Kooks 1-7\/8\" SS Headers \u0026 Catted Connection Kit (2015-2026 Mustang GT 5.0L) - 1151H422","description":"\u003cp\u003eThe Kooks 1151H422 kit pairs a set of 1-7\/8 inch x 3 inch stainless steel long tube headers with stainless steel catted connection pipes for the Coyote 5.0L-powered Mustang GT. Kooks developed this version around the 2026 model year, and the kit is listed as covering 2015 through 2026 Mustang GT applications. It replaces the factory exhaust manifolds and front connection pipes and joins the original cat-back system.\u003c\/p\u003e\n\u003cp\u003eThe kit arrives with the O2 sensor bungs and emissions components already in place, and Kooks includes the hardware needed for installation. That makes it a complete header-and-connection package rather than a set of headers that still needs pipes, sensor provisions, or fasteners sourced separately. Note that Kooks states these parts are not legal for sale, installation, or use on licensed vehicles in California and are not CARB compliant.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLong tube header design sized at 1-7\/8 inch x 3 inch\u003c\/li\u003e\n\u003cli\u003eStainless steel header construction\u003c\/li\u003e\n\u003cli\u003eStainless steel catted connection pipes\u003c\/li\u003e\n\u003cli\u003eConnection pipes built to mate with the OEM cat-back exhaust\u003c\/li\u003e\n\u003cli\u003eO2 sensor bungs pre-installed\u003c\/li\u003e\n\u003cli\u003eEmissions components pre-installed\u003c\/li\u003e\n\u003cli\u003eInstallation hardware included\u003c\/li\u003e\n\u003cli\u003eDesign developed specifically around the 2026 Mustang GT\u003c\/li\u003e\n\u003cli\u003eManufacturer part number 1151H422\u003c\/li\u003e\n\u003cli\u003eNot CARB compliant; not legal for sale, installation, or use on licensed vehicles in California\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eStainless Steel Long Tube Headers and Catted Connection Pipes\u003c\/h3\u003e\u003cp\u003eBoth the long tube headers and the catted connection pipes in this Kooks kit are made from stainless steel. The headers use a 1-7\/8 inch x 3 inch sizing, and the connection pipes are designed to bolt up to the factory cat-back, so the rest of the original exhaust can stay in place.\u003c\/p\u003e\u003cp\u003eKooks ships the kit with the O2 bungs and emissions components already installed on the parts, which removes the need to weld in sensor provisions or add catalytic hardware after the fact.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eConnection pipes are designed to join the OEM cat-back exhaust, so the factory rear section can be retained\u003c\/li\u003e\n\u003cli\u003eO2 bungs and emissions components come pre-installed\u003c\/li\u003e\n\u003cli\u003eAll hardware required for installation is included\u003c\/li\u003e\n\u003cli\u003eNot legal for sale, installation, or use on licensed vehicles in California; not CARB compliant\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCombines long tube headers and catted connection pipes in one kit, so no separate mid-pipe purchase is needed to connect to the factory cat-back\u003c\/li\u003e\n\u003cli\u003ePre-installed O2 bungs and emissions components reduce fabrication work during installation\u003c\/li\u003e\n\u003cli\u003eIncluded hardware means the install can proceed without sourcing fasteners separately\u003c\/li\u003e\n\u003cli\u003eStainless steel construction for both the headers and the connection pipes\u003c\/li\u003e\n\u003cli\u003eEngineered with the 2026 Mustang GT in mind while also listed for 2015-2026 GT models\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2026 Ford Mustang GT\u003c\/li\u003e\n\u003cli\u003e2015-2026 Ford Mustang GT\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePair of long tube headers in stainless steel, 1-7\/8 inch x 3 inch\u003c\/li\u003e\n\u003cli\u003eCatted connection pipes in stainless steel for attaching to the OEM cat-back\u003c\/li\u003e\n\u003cli\u003eO2 bungs and emissions components, pre-installed\u003c\/li\u003e\n\u003cli\u003eInstallation hardware\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Kooks","offers":[{"title":"Default Title","offer_id":68304696901817,"sku":"KSH1151H422","price":2273.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/74eb7dc2fd732b98b5692cb844efe957_598048c2-5b0f-4ff2-ad6d-d4d13f72dc43.png?v=1794374967"},{"product_id":"texas-speed-2015-2023-mustang-5-0l-gt-1-7-8-x-3-headers-and-catted-connection-pipes","title":"Texas Speed 2015-2023 Mustang 5.0L GT 1-7\/8\" x 3\" Headers and Catted Connection Pipes","description":"\u003cp\u003eThe Texas Speed 1-7\/8\" x 3\" long tube header system pairs 304 stainless steel headers with catted connection pipes for the Coyote 5.0L-powered Mustang GT. Each header uses 1-7\/8\" primary tubes formed from 2.0 mm thick stainless tubing. The primaries feed a 3\" merge-style collector with a welded O2 bung. The included catted connection pipes use band clamps to join the headers to the factory exhaust system.\u003c\/p\u003e\n\u003cp\u003eThis system suits S550 Mustang GT owners who want to replace the restrictive factory manifolds with a long tube design. Texas Speed bends every tube on CNC mandrel benders for consistent flow and fitment accuracy. The kit ships with MLS exhaust gaskets, exhaust clamps, and O2 extension harnesses. Buyers choose the O2 extension option that matches their model year and can add an optional stud kit. For enthusiasts doing the work at home, it is a fairly complete package for converting to long tubes while retaining catalytic converters.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1-7\/8\" primary tubes made from 304 stainless steel\u003c\/li\u003e\n\u003cli\u003e2.0 mm thick tubing\u003c\/li\u003e\n\u003cli\u003e3\" merge-style collector with a welded O2 bung\u003c\/li\u003e\n\u003cli\u003eFully mandrel-bent on CNC mandrel benders for flow and accuracy\u003c\/li\u003e\n\u003cli\u003eCatted connection pipes (high flow cats) that band-clamp to the factory exhaust system\u003c\/li\u003e\n\u003cli\u003eVelocity spike designed to improve power and torque\u003c\/li\u003e\n\u003cli\u003eMLS exhaust gaskets included\u003c\/li\u003e\n\u003cli\u003eExhaust clamps included\u003c\/li\u003e\n\u003cli\u003eO2 extension harnesses included\u003c\/li\u003e\n\u003cli\u003eO2 extension option selected by model year: one length for earlier cars and a separate length for 2018-and-later cars\u003c\/li\u003e\n\u003cli\u003eOptional stud kit available as a selectable option\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e304 Stainless Steel, CNC Mandrel-Bent Construction\u003c\/h3\u003e\u003cp\u003eTexas Speed builds these headers entirely from 304 stainless steel tubing with a 2.0 mm wall thickness. The 1-7\/8\" primaries are fully mandrel-bent on CNC equipment. Mandrel bending keeps the tube diameter consistent through each bend, and CNC bending keeps the tube geometry accurate from one header to the next.\u003c\/p\u003e\u003cp\u003eThe primaries meet in a 3\" merge-style collector. The O2 bung is welded directly into the collector, giving the oxygen sensor a fixed mounting point downstream of the merge. Multi-layer steel (MLS) gaskets are included to seal the header flanges at the cylinder heads.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eMoving from the factory manifolds to 1-7\/8\" long tube primaries and a 3\" merge collector is intended to improve exhaust flow from the 5.0L. Texas Speed also builds a velocity spike into the design, which the manufacturer says is meant to improve power and torque. Texas Speed does not publish specific horsepower or torque figures for this system.\u003c\/p\u003e\u003cp\u003eThe connection pipes carry high flow catalytic converters, so the cars keep catalytic converters downstream of the long tubes. The pipes attach to the factory exhaust with band clamps, allowing the rest of the stock exhaust to remain in place.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eConnection pipes join the headers to the factory exhaust system using band clamps.\u003c\/li\u003e\n\u003cli\u003eOn 2018-and-later cars, only the passenger-side header requires the O2 extension harness.\u003c\/li\u003e\n\u003cli\u003eO2 extension harnesses are offered by model year range. Select the version that matches your car.\u003c\/li\u003e\n\u003cli\u003eAn optional stud kit can be selected for the header installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eReplaces the factory manifolds with 1-7\/8\" long tube headers built from 304 stainless steel with 2.0 mm thick tubing\u003c\/li\u003e\n\u003cli\u003eCNC mandrel bending provides consistent tube diameter and accurate fitment\u003c\/li\u003e\n\u003cli\u003eCatted connection pipes retain catalytic converters while connecting to the stock exhaust\u003c\/li\u003e\n\u003cli\u003eShips with MLS gaskets, exhaust clamps, and O2 extension harnesses, reducing separate hardware purchases\u003c\/li\u003e\n\u003cli\u003eWelded O2 bung in the 3\" merge collector provides a fixed oxygen sensor location\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2015-2024 Ford Mustang GT\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePair of 1-7\/8\" x 3\" long tube headers\u003c\/li\u003e\n\u003cli\u003eCatted connection pipes\u003c\/li\u003e\n\u003cli\u003eMLS exhaust gaskets\u003c\/li\u003e\n\u003cli\u003eExhaust clamps\u003c\/li\u003e\n\u003cli\u003eO2 extension harnesses\u003c\/li\u003e\n\u003cli\u003eStud kit (only when the stud kit option is selected)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Texas Speed","offers":[{"title":"2015-2017 24\" O2 Extensions \/ Do Not Need","offer_id":68304698310841,"sku":"TSP-50178H-CON-CAT+TSP-50178H+TSP-2015-5.0-CAT-CP+TSP-5392-030+CAS-105979-12","price":1199.99,"currency_code":"USD","in_stock":true},{"title":"2015-2017 24\" O2 Extensions \/ Stud Kit","offer_id":68304698343609,"sku":"TSP-50178H-CON-CAT+TSP-50178H+TSP-2015-5.0-CAT-CP+TSP-5392-030+CAS-105979-12+TSP-COY-HDRSTD-KIT","price":1255.98,"currency_code":"USD","in_stock":true},{"title":"2018+ 18\" O2 Extensions \/ Do Not Need","offer_id":68304698376377,"sku":"TSP-50178H-CON-CAT+TSP-50178H+TSP-2015-5.0-CAT-CP+TSP-5392-030+CAS-104677-18","price":1199.99,"currency_code":"USD","in_stock":true},{"title":"2018+ 18\" O2 Extensions \/ Stud Kit","offer_id":68304698409145,"sku":"TSP-50178H-CON-CAT+TSP-50178H+TSP-2015-5.0-CAT-CP+TSP-5392-030+CAS-104677-18+TSP-COY-HDRSTD-KIT","price":1255.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/10490_1.jpg?v=1794430706"},{"product_id":"kooks-2-ss-headers-only-2015-2026-mustang-gt-5-0l-11512602","title":"Kooks 2\" SS Headers Only (2015-2026 Mustang GT 5.0L) - 11512602","description":"\u003cp\u003eThe Kooks 11512602 is a set of 2\" x 3\" long tube headers for the 2015-2026 Ford Mustang GT with the 5.0L 4V engine. They are built from 304 stainless steel and use 2\" mandrel bent primary tubes, 3\/8\" thick laser cut flanges, a round port design, and the factory bolt pattern. This part number covers the headers only. Connection pipes are not part of this listing.\u003c\/p\u003e\n\u003cp\u003eKooks has built headers and complete exhaust systems since 1962 for street, race, and off-road use. The company remains independently owned and family run across three generations, and it handcrafts its products in the USA. For S550 and later Mustang GT owners planning a long tube header upgrade who want American-made stainless construction and the backing of a limited lifetime warranty, this header is a strong foundation for a complete exhaust build.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2\" x 3\" long tube header design\u003c\/li\u003e\n\u003cli\u003e304 stainless steel construction (T304 aircraft quality per Kooks)\u003c\/li\u003e\n\u003cli\u003e2\" mandrel bent primary tubes\u003c\/li\u003e\n\u003cli\u003e3\/8\" thick laser cut flanges\u003c\/li\u003e\n\u003cli\u003eRound port configuration\u003c\/li\u003e\n\u003cli\u003eMatches the stock bolt pattern\u003c\/li\u003e\n\u003cli\u003eIncludes 755392 gaskets\u003c\/li\u003e\n\u003cli\u003eIncludes CAS-105979 oxygen sensor extension harness for 2015-2017 cars\u003c\/li\u003e\n\u003cli\u003eIncludes CAS-109677-8 oxygen sensor extension harnesses for 2018 and newer cars\u003c\/li\u003e\n\u003cli\u003eHandcrafted in the USA\u003c\/li\u003e\n\u003cli\u003eValidated by Kooks through dyno and race testing\u003c\/li\u003e\n\u003cli\u003eAlso offered as part of Header and Connection Kit part numbers 1151H632 and 1151H642\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e304 Stainless Steel Long Tube Construction\u003c\/h3\u003e\u003cp\u003eKooks builds these headers from T304 stainless steel, a grade the company describes as aircraft quality. The primaries are 2\" tubes formed with mandrel bending, and the headers mount through 3\/8\" thick flanges that are laser cut to shape.\u003c\/p\u003e\u003cp\u003eThe flanges use a round port design and follow the factory bolt pattern of the 5.0L 4V engine. Every Kooks product is handcrafted in the USA, and the company tests its designs on the dyno and at the race track. Kooks headers have earned championships and records across NHRA, IHRA, NMCA, NMRA, NASCAR, NASA, SCCA, and other sanctioning bodies.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eThe long tube layout uses 2\" primaries in a 2\" x 3\" configuration aimed at performance-oriented Mustang GT builds. Kooks states that it develops its products on the dyno and validates them in competition, with the goal of building power. The manufacturer does not publish specific horsepower or torque figures for this part number.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThis is a headers-only part number. To complete the installation, it must be paired with Kooks front connection pipes and OEM adapters, or with a Kooks X-pipe or H-pipe exhaust.\u003c\/li\u003e\n\u003cli\u003eBK101 and BK107 bolt kits are listed as required for installation.\u003c\/li\u003e\n\u003cli\u003eOxygen sensor extension harnesses are supplied for both 2015-2017 and 2018 and newer cars. Use the harness that matches your model year.\u003c\/li\u003e\n\u003cli\u003eIf you would rather buy the headers and connection pieces together, Kooks offers Header and Connection Kits under part numbers 1151H632 and 1151H642.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eReplaces the factory exhaust manifolds with 2\" mandrel bent long tube primaries on the 5.0L 4V Mustang GT\u003c\/li\u003e\n\u003cli\u003e304 stainless steel construction with 3\/8\" laser cut flanges\u003c\/li\u003e\n\u003cli\u003eMatches the factory bolt pattern at the cylinder head\u003c\/li\u003e\n\u003cli\u003eSupplied with oxygen sensor extension harnesses for both 2015-2017 and 2018 and newer cars\u003c\/li\u003e\n\u003cli\u003eHandcrafted in the USA by a manufacturer with decades of documented racing success\u003c\/li\u003e\n\u003cli\u003eCovered by a Kooks limited lifetime warranty for the original purchaser\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2015-2026 Ford Mustang GT (5.0L)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLong tube headers\u003c\/li\u003e\n\u003cli\u003e755392 gaskets\u003c\/li\u003e\n\u003cli\u003eCAS-105979 oxygen sensor extension harness for 2015-2017 cars\u003c\/li\u003e\n\u003cli\u003eCAS-109677-8 oxygen sensor extension harnesses for 2018 and newer cars\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot included:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eKooks front connection pipes and OEM adapters, or a Kooks X-pipe or H-pipe exhaust (required to complete installation)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eKooks limited lifetime warranty to the original purchaser.\u003c\/p\u003e","brand":"Kooks","offers":[{"title":"Default Title","offer_id":68304698736825,"sku":"KOO-11512602","price":1294.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/74eb7dc2fd732b98b5692cb844efe957_b5ebd858-bfce-4ab1-82d3-6d7574c975ec.png?v=1794374970"},{"product_id":"kooks-1-7-8-ss-headers-and-green-catted-connection-kit-2015-2026-mustang-gt-and-dark-horse-5-0l-1151h432","title":"Kooks 1-7\/8\" SS Headers \u0026 GREEN Catted Connection Kit (2015-2026 Mustang GT \u0026 Dark Horse 5.0L) - 1151H432","description":"\u003cp\u003eKooks part number 1151H432 combines a set of 1-7\/8 in. x 3 in. long tube headers with GREEN catted connection pipes, all in stainless steel, for the 5.0L Mustang GT. The headers replace the factory exhaust manifolds. The connection pipes carry Kooks Ultra High Performance Green catalytic converters and route exhaust back to the original cat-back system, so the rest of the factory exhaust can stay in place.\u003c\/p\u003e\n\u003cp\u003eThis kit suits Coyote-powered Mustang owners who want a long tube header upgrade and still want catalytic converters in the system. The O2 sensor bungs and emissions components come already installed, and Kooks supplies the hardware needed for installation. The converters are described as EPA legal in 49 states. The kit is not legal for sale, installation, or use on licensed vehicles in California and does not meet CARB compliance.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLong tube header design with 1-7\/8 in. x 3 in. sizing\u003c\/li\u003e\n\u003cli\u003eStainless steel construction for both the headers and the connection pipes\u003c\/li\u003e\n\u003cli\u003eCatted connection pipes using Kooks Ultra High Performance Green catalytic converters\u003c\/li\u003e\n\u003cli\u003eConverters described by Kooks as EPA legal in 49 states\u003c\/li\u003e\n\u003cli\u003eConnection pipes built to mate with the OEM cat-back exhaust\u003c\/li\u003e\n\u003cli\u003eO2 sensor bungs and emissions components installed at the factory\u003c\/li\u003e\n\u003cli\u003eAll hardware required for installation is supplied\u003c\/li\u003e\n\u003cli\u003eKooks part number 1151H432\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eStainless Steel Long Tube Headers and Catted Pipes\u003c\/h3\u003e\u003cp\u003eKooks builds both the long tube headers and the GREEN connection pipes from stainless steel. The headers use 1-7\/8 in. x 3 in. sizing and are designed specifically for the 2015-and-later Mustang GT platform.\u003c\/p\u003e\u003cp\u003eThe connection pipes come with the O2 sensor bungs and emissions components already in place, so you do not need to weld or relocate sensor fittings before installation.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eWith converters built into the connection pipes, this kit lets you run long tube headers while keeping catalytic converters in the exhaust. The pipes end at the factory cat-back connection, so you can keep the original cat-back or install an aftermarket system made for the stock connection point.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eKooks supplies all hardware required for installation\u003c\/li\u003e\n\u003cli\u003eO2 sensor bungs and emissions components are pre-installed on the connection pipes\u003c\/li\u003e\n\u003cli\u003eThe connection pipes are designed to join the OEM cat-back exhaust\u003c\/li\u003e\n\u003cli\u003eNot legal for sale, installation, or use on licensed vehicles in California; the kit does not meet CARB compliance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eReplaces the factory exhaust manifolds with stainless steel long tube headers in one complete kit\u003c\/li\u003e\n\u003cli\u003eKeeps catalytic converters in the system through Kooks Green cats, which the manufacturer describes as 49-state EPA legal\u003c\/li\u003e\n\u003cli\u003ePre-installed O2 bungs and emissions components cut down on fabrication work\u003c\/li\u003e\n\u003cli\u003eConnects to the factory cat-back, so you do not need to replace the rest of the exhaust\u003c\/li\u003e\n\u003cli\u003eComes with the installation hardware, so you do not have to source fasteners separately\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2015-2026 Ford Mustang GT\u003c\/li\u003e\n\u003cli\u003e2015-2026 Ford Mustang GT\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLong tube headers in stainless steel, 1-7\/8 in. x 3 in.\u003c\/li\u003e\n\u003cli\u003eGREEN catted connection pipes in stainless steel, made for the OEM cat-back connection\u003c\/li\u003e\n\u003cli\u003eKooks Ultra High Performance Green catalytic converters (49-state EPA legal)\u003c\/li\u003e\n\u003cli\u003eO2 bungs and emissions components, installed\u003c\/li\u003e\n\u003cli\u003eAll hardware required for installation\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Kooks","offers":[{"title":"Default Title","offer_id":68304699064505,"sku":"KSH1151H432","price":2732.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/74eb7dc2fd732b98b5692cb844efe957_f5e7e308-154d-4571-9418-d7e3720ac877.png?v=1794374971"},{"product_id":"long-tube-headers-2-long-tube-headers-and-connection-pipes-track-only-2016-2020-5-2l-shelby-gt350-fdlh00038t","title":"Long Tube Headers 2\" Long Tube Headers \u0026 Connection Pipes - Track Only (2016-2020 5.2L Shelby GT350) - FDLH00038T","description":"\u003cp\u003eThe LTH Headers FDLH00038T kit pairs 2\" long tube headers with matching connection pipes for the 5.2L Voodoo-powered 2016-2020 Shelby GT350. LTH Headers notes that the factory GT350 headers are built mainly to suppress engine sound, and that this sound-deadening design restricts exhaust flow and costs horsepower. The LTH long tube design is meant to recover that lost flow and the power that goes with it.\u003c\/p\u003e\n\u003cp\u003eThe headers are manufactured in-house in the USA by LTH Headers and finished in the company's exclusive Titan matte coating, which is intended to improve durability. A modular layout lets the system work with OEM components, and the tube design targets a balance of low-end and top-end power. This kit is designated track only. It suits GT350 owners building a dedicated track or competition car who want more power from the exhaust side of the engine.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2\" long tube headers paired with connection pipes\u003c\/li\u003e\n\u003cli\u003eExclusive LTH Titan finish with an all-over matte appearance\u003c\/li\u003e\n\u003cli\u003eTitan finish applied for added durability\u003c\/li\u003e\n\u003cli\u003eModular design allows use with OEM components\u003c\/li\u003e\n\u003cli\u003eTube design developed for a balance of low-end and top-end power\u003c\/li\u003e\n\u003cli\u003ePrecision designed by the manufacturer for proper fitment\u003c\/li\u003e\n\u003cli\u003eManufactured in-house in the USA\u003c\/li\u003e\n\u003cli\u003eLifetime manufacturer warranty\u003c\/li\u003e\n\u003cli\u003eDesignated track only\u003c\/li\u003e\n\u003cli\u003eManufacturer part number FDLH00038T\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTitan Finish and USA In-House Manufacturing\u003c\/h3\u003e\u003cp\u003eLTH Headers builds these GT350 headers in its own facility in the USA. Each set receives the company's exclusive Titan finish, a matte coating that covers the entire header and is designed to add durability beyond a bare finish.\u003c\/p\u003e\u003cp\u003eLTH Headers describes the system as precision designed for fitment on the GT350 platform. Its modular construction allows the headers to work with OEM components, so the rest of the vehicle's exhaust system can be configured as the owner needs.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eAccording to LTH Headers, the stock GT350 headers are designed with sound suppression as a priority, and this costs exhaust flow and horsepower. Replacing them with long tube headers is intended to restore that flow. The manufacturer states that the design was developed for a balance of low-end and top-end power rather than favoring one end of the rev range.\u003c\/p\u003e\u003cp\u003eLTH Headers says headers free up the most power when the car is tuned to account for the added airflow. The manufacturer also notes that modifying the cat-back section mainly changes the exhaust sound, while the headers are where the power gains come from. Long tube headers also bring out more of the 5.2L Voodoo's exhaust note.\u003c\/p\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eReplaces the factory GT350 headers, which the manufacturer says are built to suppress sound at the expense of flow and horsepower\u003c\/li\u003e\n\u003cli\u003eTube design targets a balance of low-end and top-end power\u003c\/li\u003e\n\u003cli\u003eGives the best results when paired with a tune calibrated for the added airflow\u003c\/li\u003e\n\u003cli\u003eTitan matte finish adds durability\u003c\/li\u003e\n\u003cli\u003eModular design allows use with OEM components\u003c\/li\u003e\n\u003cli\u003eMade in-house in the USA and backed by a lifetime warranty\u003c\/li\u003e\n\u003cli\u003eSuited to dedicated track and competition GT350 builds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2016-2020 Ford Mustang GT350 (5.2L)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2\" long tube headers\u003c\/li\u003e\n\u003cli\u003eConnection pipes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eLifetime warranty from LTH Headers\u003c\/p\u003e","brand":"LTH Headers","offers":[{"title":"Default Title","offer_id":68304699097273,"sku":"LTH-FDLH00038T","price":2345.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/LTH-GT350-Headers-01.png?v=1794430310"},{"product_id":"kooks-2-x-3-headers-and-off-road-race-only-connection-kit-2020-shelby-gt500-5-2l-1156h610","title":"Kooks 2\" x 3\" Headers \u0026 Off-Road Race Only Connection Kit (2020+ Shelby GT500 5.2L) - 1156H610","description":"\u003cp\u003eThe Kooks 1156H610 is a set of 2\" x 3\" longtube headers for the 5.2L Shelby GT500, packaged with off-road race only connection pipes. The headers are made from 304 stainless steel, left in a natural stainless finish, and use 2.000 in. diameter primary tubes. This part number covers the headers and the connection hardware between them and the rest of the exhaust.\u003c\/p\u003e\n\u003cp\u003eThis kit suits GT500 owners building a dedicated track or competition car who want a matched header and connection pipe package from one manufacturer. Kooks has made exhaust components for automotive enthusiasts for more than 50 years. The connection pipes are designated for off-road racing use only, so plan for that when building the rest of the car.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eKooks part number 1156H610\u003c\/li\u003e\n\u003cli\u003eLongtube header design with 2\" x 3\" sizing\u003c\/li\u003e\n\u003cli\u003eTube diameter: 2.000 in.\u003c\/li\u003e\n\u003cli\u003eMaterial: 304 stainless steel\u003c\/li\u003e\n\u003cli\u003eFinish: natural stainless steel\u003c\/li\u003e\n\u003cli\u003eIncludes off-road race only connection pipes\u003c\/li\u003e\n\u003cli\u003eDesigned for the 5.2L Shelby GT500 automotive application\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e304 Stainless Steel Construction\u003c\/h3\u003e\u003cp\u003eKooks builds the 1156H610 headers from 304 stainless steel and leaves them in a natural stainless finish rather than applying a coating. The 2.000 in. tubing is part of the 2\" x 3\" header layout specified for the 5.2L GT500, and the matching off-road connection pipes are supplied with the headers as one kit.\u003c\/p\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eYou are building a track or competition GT500 and want longtube headers and connection pipes supplied together under one part number.\u003c\/li\u003e\n\u003cli\u003eYou want headers made from 304 stainless steel with a natural stainless finish.\u003c\/li\u003e\n\u003cli\u003eYou want 2\" x 3\" header sizing with 2.000 in. tubing for the 5.2L engine.\u003c\/li\u003e\n\u003cli\u003eYou prefer components from Kooks, which has produced exhaust parts for more than 50 years.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2020-2026 Ford Mustang GT500 (5.2L)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2\" x 3\" longtube headers\u003c\/li\u003e\n\u003cli\u003eOff-road race only connection pipes\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Kooks","offers":[{"title":"Default Title","offer_id":68304700997817,"sku":"KOO-1156H610","price":2126.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/c8b3183c74ac5c3861ea37c9bcfa61e3_338dca62-e5a3-471e-ba60-130908761524.jpg?v=1794374975"},{"product_id":"afe-twisted-steel-409-stainless-steel-short-tube-header-w-titanium-coating-ford-mustang-11-17-v6-3-7l-48-43031-t","title":"AFE Twisted Steel 409 Stainless Steel Short Tube Header w\/ Titanium Coating (Ford Mustang 11-17 V6-3.7L) - 48-43031-T","description":"\u003cp\u003eThe aFe Twisted Steel short tube header, part number 48-43031-T, is a shorty header built for the 3.7L V6 Mustang. It replaces the factory exhaust manifolds with 1-5\/8 inch mandrel-bent 409 stainless steel primaries that feed 3-to-1 mitered merge collectors, and it has a Titanium Ceramic Coat finish. aFe designed the header with computer-aided design tools to match factory mounting points closely, so it installs as a direct bolt-on without cutting or modification.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer-stated gains:\u003c\/strong\u003e Up to +14 horsepower and +15 lb-ft of torque, as measured by aFe on its in-house dyno.\u003c\/p\u003e\n\u003cp\u003eFor owners of 2011-2017 V6 Mustangs looking to get more out of the 3.7L, this header targets the restriction at the head of the exhaust system. aFe reports gains of up to 14 horsepower and 15 lb-ft of torque on its in-house dyno, along with improved throttle response. The coating is intended to lower header surface and underhood temperatures. Gaskets and lower outlet hardware are included, which makes it a practical exhaust upgrade for enthusiasts who do their own work.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1-5\/8 inch mandrel-bent 409 stainless steel tubing\u003c\/li\u003e\n\u003cli\u003eTitanium Ceramic Coat finish to reduce exterior header surface temperatures and engine compartment temperatures\u003c\/li\u003e\n\u003cli\u003e3-to-1 mitered merge collectors designed to reduce turbulence and raise exhaust velocity\u003c\/li\u003e\n\u003cli\u003eFactory-style laser-cut, machined mild steel flanges for a secure, leak-free seal\u003c\/li\u003e\n\u003cli\u003e100% MIG-welded construction\u003c\/li\u003e\n\u003cli\u003eDeveloped with computer-aided design technology for close-tolerance, factory-style fitment\u003c\/li\u003e\n\u003cli\u003eDirect bolt-on design with no cutting or modifications required\u003c\/li\u003e\n\u003cli\u003eGaskets and lower outlet hardware included\u003c\/li\u003e\n\u003cli\u003eShort tube (shorty) header design\u003c\/li\u003e\n\u003cli\u003eManufacturer part number 48-43031-T\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMandrel-Bent 409 Stainless Steel with Titanium Ceramic Coat\u003c\/h3\u003e\u003cp\u003eaFe builds the primaries from 1-5\/8 inch 409 stainless steel tubing, mandrel-bent to keep the tube diameter consistent through each bend. The material was chosen for strength and durability, and every joint is MIG-welded across the whole assembly.\u003c\/p\u003e\u003cp\u003eThe head flanges are laser-cut, machined mild steel in a factory-style pattern. They are designed to seal securely against the cylinder head and prevent leaks. aFe used computer-aided design to set the header geometry, aiming for close-tolerance fitment that lines up with the factory mounting locations.\u003c\/p\u003e\u003cp\u003eThe Titanium Ceramic Coat finish is more than a cosmetic choice. aFe states it lowers the outside surface temperature of the headers, which also brings down engine compartment temperatures, and that it improves overall header efficiency.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eEach bank uses a 3-to-1 mitered merge collector that joins the three primaries. aFe says this reduces turbulence and increases exhaust velocity, which results in more horsepower and torque and sharper throttle response.\u003c\/p\u003e\u003cp\u003eOn aFe's in-house dyno, the header made up to 14 additional horsepower and 15 additional lb-ft of torque on the 3.7L V6. The ceramic coating also keeps more heat in the header and less in the engine bay, and aFe credits it with improving header efficiency.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDesigned as a direct bolt-on system\u003c\/li\u003e\n\u003cli\u003eNo cutting or modifications required\u003c\/li\u003e\n\u003cli\u003eGaskets and lower outlet hardware are included for installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eManufacturer-measured gains of up to 14 horsepower and 15 lb-ft of torque over the factory setup on the 3.7L V6\u003c\/li\u003e\n\u003cli\u003e3-to-1 mitered merge collectors intended to improve exhaust velocity and throttle response\u003c\/li\u003e\n\u003cli\u003eTitanium Ceramic Coat finish helps reduce underhood heat\u003c\/li\u003e\n\u003cli\u003e409 stainless steel tubing and fully MIG-welded construction for long-term durability\u003c\/li\u003e\n\u003cli\u003eBolt-on fitment with included gaskets and lower outlet hardware, so no fabrication is needed\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2011-2017 Ford Mustang V6 (3.7L)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eTwisted Steel short tube headers with Titanium Ceramic Coat\u003c\/li\u003e\n\u003cli\u003eGaskets\u003c\/li\u003e\n\u003cli\u003eLower outlet hardware\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"aFe","offers":[{"title":"Default Title","offer_id":68304701391033,"sku":"AFE48-43031-T","price":646.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/48-43031-t_1.jpg?v=1794374978"},{"product_id":"long-tube-headers-1-7-8-long-tube-headers-and-connection-pipes-track-only-2016-2020-5-2l-shelby-gt350-fdlh00035t","title":"Long Tube Headers 1-7\/8\" Long Tube Headers \u0026 Connection Pipes - Track Only (2016-2020 5.2L Shelby GT350) - FDLH00035T","description":"\u003cp\u003eThe LTH Headers FDLH00035T is a set of 1-7\/8 in. long tube headers with matching connection pipes, engineered for the 5.2L Voodoo V8 in the 2016-2020 Shelby GT350. LTH Headers designed this system to replace the factory headers, which were built with heavy emphasis on suppressing engine noise. According to the manufacturer, that sound-suppression approach restricts exhaust flow and costs the engine power. This kit is intended to restore that lost flow.\u003c\/p\u003e\n\u003cp\u003eLTH builds these headers in-house in the USA and finishes them in its proprietary Titan matte coating for added durability. The modular layout lets the headers work with OEM components, and the tube design targets a balance of low-end and top-end power rather than favoring one end of the rev range. This listing is designated Track Only, so it is aimed at GT350 owners building dedicated track or competition cars who want more power and a stronger exhaust note.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1-7\/8 in. long tube header design\u003c\/li\u003e\n\u003cli\u003eIncludes connection pipes along with the headers\u003c\/li\u003e\n\u003cli\u003eDesignated Track Only\u003c\/li\u003e\n\u003cli\u003eTitan matte finish developed by LTH for added durability\u003c\/li\u003e\n\u003cli\u003eModular design that allows use with OEM components\u003c\/li\u003e\n\u003cli\u003eTube design developed to balance low-end and top-end power\u003c\/li\u003e\n\u003cli\u003ePrecision designed for accurate fitment on the 5.2L GT350\u003c\/li\u003e\n\u003cli\u003eManufactured in-house in the USA by LTH Headers\u003c\/li\u003e\n\u003cli\u003eBacked by a lifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eUSA-Built Headers with Titan Matte Finish\u003c\/h3\u003e\u003cp\u003eLTH Headers manufactures these long tube headers in its own facility in the USA. The headers are designed specifically around the GT350 chassis and 5.2L engine for accurate fitment.\u003c\/p\u003e\u003cp\u003eEach set is coated in LTH's exclusive Titan finish, which gives the headers an even matte appearance across all surfaces and adds durability. The modular construction lets the headers integrate with factory components.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eThe factory GT350 headers are built with a priority on keeping engine noise down, and LTH states that this design limits exhaust flow and horsepower. Replacing them with 1-7\/8 in. long tube headers is intended to free up that restricted flow.\u003c\/p\u003e\u003cp\u003eLTH developed the header design to provide a balance of low-end and top-end power. The manufacturer notes that while cat-back changes mainly affect sound, headers are where the larger power gains are found, and that the benefit is greatest when the car is tuned to take advantage of the added airflow. A more pronounced exhaust note from the Voodoo V8 is another result of the upgrade.\u003c\/p\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eReplaces factory headers that LTH says were designed with sound suppression in mind at the expense of exhaust flow\u003c\/li\u003e\n\u003cli\u003e1-7\/8 in. long tube design developed for a balance of low-end and top-end power\u003c\/li\u003e\n\u003cli\u003eModular design works with OEM components\u003c\/li\u003e\n\u003cli\u003eTitan matte finish adds durability\u003c\/li\u003e\n\u003cli\u003eBuilt in-house in the USA and covered by a lifetime warranty\u003c\/li\u003e\n\u003cli\u003eBest suited to track-focused GT350 builds, especially those with a tune to take advantage of the added airflow\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2016-2020 Ford Mustang GT350 (5.2L)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1-7\/8 in. long tube headers\u003c\/li\u003e\n\u003cli\u003eConnection pipes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eLifetime warranty from LTH Headers.\u003c\/p\u003e","brand":"LTH Headers","offers":[{"title":"Default Title","offer_id":68304703652025,"sku":"LTH-FDLH00035T","price":2245.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/LTH-GT350-Headers-01_7f134ed2-d564-42e5-ac3a-6fc42eb17a87.png?v=1794430310"},{"product_id":"long-tube-headers-fdrd00002t-resonator-delete-for-16-20-gt350","title":"Long Tube Headers FDRD00002T Resonator Delete for '16-20 GT350","description":"\u003cp\u003eThe LTH Headers FDRD00002T is a resonator delete built for the Shelby GT350 Mustang. It is made from 2.75-inch stainless steel tubing and finished with the LTH Titan coating. The delete removes the factory resonators from the exhaust path. Its modular layout lets it work alongside OEM exhaust components, so owners can change one section of the system without replacing the rest.\u003c\/p\u003e\n\u003cp\u003eLTH designs and builds the part in its own facility in the USA and engineers it for precise fitment on the GT350 platform. The company says the design targets a balance of low-end and top-end power. The part is backed by a lifetime warranty. It is sold for off-road use only and is not California exhaust compliant.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eResonator delete for the Shelby GT350 Mustang\u003c\/li\u003e\n\u003cli\u003e2.75-inch stainless steel construction\u003c\/li\u003e\n\u003cli\u003eTitan finish applied for added durability\u003c\/li\u003e\n\u003cli\u003eModular design compatible with OEM exhaust components\u003c\/li\u003e\n\u003cli\u003eDeveloped to balance low-end and top-end power, per the manufacturer\u003c\/li\u003e\n\u003cli\u003ePrecision designed for accurate fitment\u003c\/li\u003e\n\u003cli\u003eManufactured in-house in the USA by LTH Headers\u003c\/li\u003e\n\u003cli\u003eLifetime warranty\u003c\/li\u003e\n\u003cli\u003eNot California exhaust compliant, with no implied CARB certification; off-road use only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e2.75-Inch Stainless Steel with Titan Finish\u003c\/h3\u003e\u003cp\u003eThe FDRD00002T is built from 2.75-inch stainless steel tubing. LTH coats the steel with its Titan finish to add durability.\u003c\/p\u003e\u003cp\u003eLTH produces the part in its own facility in the USA rather than outsourcing fabrication. The company states the delete is precision designed to fit correctly on the GT350.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eRemoving the resonators takes those components out of the exhaust path. LTH says the design was developed to balance low-end and top-end power.\u003c\/p\u003e\u003cp\u003eBecause the delete is modular, it can be installed with the remaining OEM exhaust components. It can also serve as one stage of a larger exhaust build completed over time.\u003c\/p\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRemoves the factory resonators while working with the existing OEM exhaust components\u003c\/li\u003e\n\u003cli\u003eStainless steel tubing with the Titan finish is intended for long-term durability\u003c\/li\u003e\n\u003cli\u003eDesigned and manufactured in-house in the USA for the GT350\u003c\/li\u003e\n\u003cli\u003eCovered by a lifetime warranty from LTH\u003c\/li\u003e\n\u003cli\u003eSuited to off-road and competition-use vehicles, since it is not California exhaust compliant and carries no CARB certification\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2016-2020 Ford Mustang GT350\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eLifetime warranty from LTH Headers.\u003c\/p\u003e","brand":"LTH Headers","offers":[{"title":"Default Title","offer_id":68304704045241,"sku":"LTH-FDRD00002T","price":349.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/FDRD00002T-01.jpg?v=1794430311"},{"product_id":"kooks-2025-ford-mustang-gtd-5-2l-3in-oem-connection-green-catted-x-pipe-kooks-header-required","title":"Kooks 2025+ Ford Mustang GTD 5.2L 3in OEM Connection GREEN Catted X-Pipe (Kooks Header Required)","description":"\u003cp\u003eThe Kooks 3-inch OEM Connection GREEN Catted X-Pipe is a catalyzed crossover mid-section built for the 2025 and later Ford Mustang GTD with the 5.2L V8. The X-pipe layout ties the two exhaust banks together ahead of the rest of the system, the integrated catalytic converters keep the section catted, and the OEM-style 3-inch connection lets it join the downstream exhaust. It is designed to pair with Kooks headers, which are required for this part to fit.\u003c\/p\u003e\n\u003cp\u003eKooks Headers has been building exhaust components since 1962 and remains independently owned and operated, now under its third generation of family leadership. The company handcrafts its products in the USA from T304 stainless steel, dyno and race tests them, and backs them with a Limited Lifetime Warranty to the original purchaser. For GTD owners already running or planning a Kooks header installation, this X-pipe is the matching catted mid-section from the same manufacturer.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eX-pipe crossover design with integrated catalytic converters (catted)\u003c\/li\u003e\n\u003cli\u003eKooks GREEN catted configuration\u003c\/li\u003e\n\u003cli\u003e3-inch OEM connection\u003c\/li\u003e\n\u003cli\u003eBuilt for the 2025+ Ford Mustang GTD 5.2L V8\u003c\/li\u003e\n\u003cli\u003eRequires Kooks headers\u003c\/li\u003e\n\u003cli\u003eConstructed from T304 stainless steel\u003c\/li\u003e\n\u003cli\u003eHandcrafted in the USA\u003c\/li\u003e\n\u003cli\u003eDyno and race tested by Kooks\u003c\/li\u003e\n\u003cli\u003eLimited Lifetime Warranty to the original purchaser\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eT304 Stainless Steel, Handcrafted in the USA\u003c\/h3\u003e\u003cp\u003eKooks builds its exhaust components from T304 stainless steel, a grade the manufacturer describes as aircraft quality. Every Kooks product is handcrafted in the USA, and the company states its parts are 100 percent manufactured domestically.\u003c\/p\u003e\u003cp\u003eKooks has been producing headers and complete exhaust systems since 1962 and remains an independent, family-run company in its third generation. Its products have been used in competition across organizations including NHRA, IHRA, NMCA, NMRA, NASCAR, NASA and SCCA, and each product is dyno and race tested before release.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eKooks states that its systems are designed with maximum power as the goal and that each product is validated on the dyno and on track. As an X-pipe, this section connects the left and right exhaust banks in a crossover, while the catalytic converters keep the mid-section catted. Kooks does not publish specific horsepower, torque or sound figures for this part.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eKooks headers are required; this X-pipe is designed to work with a Kooks header installation rather than the factory exhaust manifolds.\u003c\/li\u003e\n\u003cli\u003eUses a 3-inch OEM connection to join the downstream exhaust.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMatches a Kooks header installation on the Mustang GTD with a catted mid-section from the same manufacturer.\u003c\/li\u003e\n\u003cli\u003eRetains catalytic converters in the X-pipe section rather than going to an off-road setup.\u003c\/li\u003e\n\u003cli\u003eT304 stainless steel construction, handcrafted in the USA.\u003c\/li\u003e\n\u003cli\u003eDyno and race tested by a manufacturer with exhaust experience dating back to 1962.\u003c\/li\u003e\n\u003cli\u003eCovered by a Limited Lifetime Warranty to the original purchaser.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2025-2026 Ford Mustang (5.2L)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eLimited Lifetime Warranty to the original purchaser.\u003c\/p\u003e","brand":"Kooks Headers","offers":[{"title":"Default Title","offer_id":68304705355961,"sku":"KSH11575380","price":3211.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/c27a3ad5b1dd4aeaab624136d39229a0_b2dfe5b2-c947-4b4e-af34-e33fba11571c.png?v=1794435504"},{"product_id":"xforce-stainless-steel-17-8-header-kit-with-high-flow-metallic-cats-2018-mustang-h2-fm18-kitb","title":"XForce Stainless Steel  1\"7\/8 Header Kit With High Flow Metallic Cats (2018+ Mustang) - H2-FM18-KITB","description":"\u003cp\u003eThe XForce H2-FM18-KITB is a stainless steel header kit for the 2018-and-later Ford Mustang GT. It combines 1-7\/8 inch headers with high-flow metallic catalytic converters, and the outlet uses a 2-bolt flange. Because it includes both the headers and the converters, it replaces the factory exhaust manifolds and the catalytic converter section in a single package.\u003c\/p\u003e\n\u003cp\u003eXForce is an Australian exhaust manufacturer. The company develops its systems at its own research and development center and dyno tests them on a Dynapack Evolution 3000 chassis dynamometer. Its products also go through an extensive quality control process. This kit suits owners of late-model Mustang GTs who want stainless headers and high-flow metallic cats from one manufacturer as a matched assembly.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eManufacturer part number H2-FM18-KITB\u003c\/li\u003e\n\u003cli\u003eStainless steel construction\u003c\/li\u003e\n\u003cli\u003e1-7\/8 inch header sizing\u003c\/li\u003e\n\u003cli\u003eHigh-flow catalytic converters with metallic substrates\u003c\/li\u003e\n\u003cli\u003e2-bolt outlet flange\u003c\/li\u003e\n\u003cli\u003eSupplied as a kit that pairs the headers with the catalytic converters\u003c\/li\u003e\n\u003cli\u003eDesigned and dyno tested by XForce on a Dynapack Evolution 3000 chassis dynamometer at its Australian R\u0026amp;D center\u003c\/li\u003e\n\u003cli\u003eProduced under XForce's extensive quality control process\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eStainless Steel Headers with Metallic High-Flow Cats\u003c\/h3\u003e\u003cp\u003eThe headers in this XForce kit are made from stainless steel and sized at 1-7\/8 inches. The catalytic converters use a metallic substrate in a high-flow design. The outlet connects through a 2-bolt flange.\u003c\/p\u003e\u003cp\u003eXForce develops its exhaust products at its own R\u0026amp;D center in Australia and validates them on a Dynapack Evolution 3000 chassis dynamometer. The manufacturer also states that its products go through extensive quality control before release.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eXForce designed this kit to maximize exhaust performance. Development included dyno testing on the company's Dynapack Evolution 3000 chassis dynamometer. The manufacturer has not published specific horsepower or torque figures for this part number.\u003c\/p\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eIt replaces the factory manifolds and converters with stainless steel 1-7\/8 inch headers and high-flow metallic cats in one kit.\u003c\/li\u003e\n\u003cli\u003eThe headers and converters come from the same manufacturer, so you do not have to source compatible cats separately.\u003c\/li\u003e\n\u003cli\u003eStainless steel construction is a practical choice for a part exposed to constant heat cycling.\u003c\/li\u003e\n\u003cli\u003eThe design was developed and dyno tested by XForce on a Dynapack Evolution 3000 chassis dynamometer.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2018-2026 Ford Mustang\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStainless steel 1-7\/8 inch headers\u003c\/li\u003e\n\u003cli\u003eHigh-flow metallic catalytic converters\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"XForce","offers":[{"title":"Default Title","offer_id":68304706273465,"sku":"XFC-H2-FM18-KITB","price":1305.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/H2-FM18-KITB_02.png?v=1794430536"},{"product_id":"kooks-2-ss-headers-and-h-o-green-catted-connection-kit-2015-2026-mustang-gt-5-0l-2026-dark-horse-1151h642","title":"Kooks 2\" SS Headers \u0026 H.O. GREEN Catted Connection Kit (2015-2026 Mustang GT 5.0L \/ 2026+ Dark Horse) - 1151H642","description":"\u003cp\u003eThe Kooks 1151H642 kit combines a set of 2 inch by 3 inch stainless steel long tube headers with Kooks High Output GREEN catted connection pipes and OEM adapters, designed for the 5.0L 4V Coyote-powered Mustang GT and Dark Horse. The headers use 2 inch mandrel bent primaries feeding 3 inch collectors, and the connection pipes carry EPA verified 300 cell high flow catalytic converters. This lets owners move to a long tube header layout while keeping catalytic converters in the system.\u003c\/p\u003e\n\u003cp\u003eThe package is aimed at enthusiasts who want a complete header and catted mid-pipe solution from a single manufacturer. Kooks states that the High Output GREEN converters are engineered for modern muscle cars producing more than 750 RWHP, so the kit suits mildly modified builds as well as heavily built ones. Gaskets, an oxygen sensor extension harness, clamps, and the bolt kit come in the box, and Kooks states that no other parts are needed. The headers are built in the USA from T304 stainless steel and carry a Limited Lifetime Warranty for the original purchaser.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2 inch x 3 inch stainless steel long tube header design for the 5.0L 4V engine\u003c\/li\u003e\n\u003cli\u003e304 stainless steel construction, specified by Kooks as T304 aircraft quality stainless\u003c\/li\u003e\n\u003cli\u003e3\/8 inch thick laser cut header flanges\u003c\/li\u003e\n\u003cli\u003eDual bolt pattern header flange\u003c\/li\u003e\n\u003cli\u003e2 inch mandrel bent primary tubes\u003c\/li\u003e\n\u003cli\u003e3 inch collectors with Kooks' patented scavenging spike\u003c\/li\u003e\n\u003cli\u003eHigh Output GREEN catted connection pipes with EPA verified 300 cell high flow catalytic converters\u003c\/li\u003e\n\u003cli\u003eConverters engineered for modern muscle cars making more than 750 RWHP\u003c\/li\u003e\n\u003cli\u003eOEM adapters included for connection to the factory exhaust\u003c\/li\u003e\n\u003cli\u003eGaskets, oxygen sensor extension harness, clamps, and bolt kit included\u003c\/li\u003e\n\u003cli\u003eManufactured in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eT304 Stainless Steel Construction with 3\/8 Inch Laser Cut Flanges\u003c\/h3\u003e\u003cp\u003eKooks builds these headers from T304 stainless steel, which the company describes as aircraft quality. The primary tubes are 2 inch diameter and mandrel bent, so the tube diameter stays consistent through each bend rather than crimping as it would with a press bend.\u003c\/p\u003e\u003cp\u003eAt the cylinder head, each header mounts with a 3\/8 inch thick laser cut flange. The flange uses a dual bolt pattern. The four primaries merge into 3 inch collectors that incorporate Kooks' patented scavenging spike at the merge point.\u003c\/p\u003e\u003cp\u003eKooks, a family-run company founded in 1962 that remains independently owned, builds its products by hand in the United States. The company also states that it validates its designs through dyno testing and on-track use.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eMandrel bent 2 inch primaries feed 3 inch collectors fitted with Kooks' patented scavenging spike, giving exhaust gases a smooth path from the cylinder head to the collector.\u003c\/p\u003e\u003cp\u003eThe included High Output GREEN connection pipes use 300 cell high flow catalytic converters that carry EPA verification. Kooks engineered these converters for modern muscle cars making more than 750 RWHP, so they are intended to remain suitable as a build progresses to higher output levels.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eKooks includes the gaskets, oxygen sensor extension harness, clamps, and bolt kit needed for installation.\u003c\/li\u003e\n\u003cli\u003eAccording to Kooks, no additional parts are required to complete the installation.\u003c\/li\u003e\n\u003cli\u003eOEM adapters are supplied to join the catted connection pipes to the factory exhaust.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eYou get long tube headers and catted connection pipes in one package designed to work together, instead of sourcing them separately.\u003c\/li\u003e\n\u003cli\u003eEPA verified 300 cell high flow converters let you retain catalytic converters with a long tube header setup.\u003c\/li\u003e\n\u003cli\u003eThe converters are engineered for applications making more than 750 RWHP, giving room for future power upgrades.\u003c\/li\u003e\n\u003cli\u003eT304 stainless construction, 3\/8 inch laser cut flanges, and mandrel bent primaries reflect a durable build.\u003c\/li\u003e\n\u003cli\u003eThe kit includes the oxygen sensor extension harness and installation hardware, and Kooks states no additional parts are required.\u003c\/li\u003e\n\u003cli\u003eKooks products are built in the USA and backed by a Limited Lifetime Warranty to the original purchaser.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2015-2026 Ford Mustang Dark Horse \/ GT (5.0L)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2 inch x 3 inch stainless steel headers\u003c\/li\u003e\n\u003cli\u003eHigh Output GREEN catted connection pipes\u003c\/li\u003e\n\u003cli\u003eOEM adapters\u003c\/li\u003e\n\u003cli\u003eGaskets\u003c\/li\u003e\n\u003cli\u003eOxygen sensor extension harness\u003c\/li\u003e\n\u003cli\u003eClamps\u003c\/li\u003e\n\u003cli\u003eBolt kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eLimited Lifetime Warranty to the original purchaser.\u003c\/p\u003e","brand":"Kooks","offers":[{"title":"Default Title","offer_id":68304706339001,"sku":"KSH1151H642","price":3244.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/74eb7dc2fd732b98b5692cb844efe957_6b03ca66-cf43-430e-81f5-7e08f2a9d286.png?v=1794374991"},{"product_id":"xforce-ss-17-8-header-kit-with-high-flow-metallic-cats-2015-2017-mustang-gt-hs-fm15-kitb","title":"XForce SS 1\"7\/8 Header Kit With High Flow Metallic Cats (2015-2017 Mustang GT) - HS-FM15-KITB","description":"\u003cp\u003eThe XForce HS-FM15-KITB is a stainless steel header kit for the 2015-2017 Ford Mustang GT, built around a 1-7\/8-inch header design and paired with high flow metallic catalytic converters. It replaces the factory exhaust manifolds and catalytic converters as one matched package, so headers and cats come from the same manufacturer instead of being sourced separately.\u003c\/p\u003e\n\u003cp\u003eXForce, an Australian exhaust manufacturer, says it develops its exhaust systems through in-house research and development and dyno tests them on a Dynapack Evolution 3000 chassis dynamometer. For S550 GT owners planning an exhaust upgrade at the manifold and catalytic converter level, this kit combines stainless steel headers with high flow metallic cats from a single brand.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeader kit for the 2015-2017 Ford Mustang GT\u003c\/li\u003e\n\u003cli\u003eStainless steel construction\u003c\/li\u003e\n\u003cli\u003e1-7\/8-inch header kit specification\u003c\/li\u003e\n\u003cli\u003eIncludes high flow metallic catalytic converters\u003c\/li\u003e\n\u003cli\u003eDeveloped and dyno tested by XForce on a Dynapack Evolution 3000 chassis dynamometer at its Australian R\u0026amp;D center\u003c\/li\u003e\n\u003cli\u003eManufacturer part number HS-FM15-KITB\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eStainless Steel Header and Metallic Cat Construction\u003c\/h3\u003e\u003cp\u003eThe headers in this kit are made from stainless steel and are paired with catalytic converters that use a high flow metallic design. XForce says extensive quality control is part of its manufacturing process and that its exhaust products are designed for practical, performance-focused use.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eXForce says it designs its exhaust systems to maximize performance and tests them on its Dynapack Evolution 3000 chassis dynamometer to confirm results. The manufacturer does not publish specific horsepower, torque, or sound figures for this header kit.\u003c\/p\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eReplaces the factory manifolds with stainless steel headers specific to the 2015-2017 Mustang GT\u003c\/li\u003e\n\u003cli\u003eIncludes high flow metallic catalytic converters, so you do not need to source cats separately\u003c\/li\u003e\n\u003cli\u003eHeaders and cats are designed by the same manufacturer to work as a single kit\u003c\/li\u003e\n\u003cli\u003eBacked by XForce's in-house chassis dyno testing during development\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2015-2017 Ford Mustang\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStainless steel 1-7\/8-inch headers\u003c\/li\u003e\n\u003cli\u003eHigh flow metallic catalytic converters\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"XForce","offers":[{"title":"Default Title","offer_id":68304706404537,"sku":"XFC-HS-FM15-KITB","price":1305.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/1810762cb28b9fc515acada9358e31d7_2.jpg?v=1794436017"},{"product_id":"long-tube-headers-t304ss-1-7-8-x-3-equal-length-long-tube-headers-only-titan-finish-2015-2026-mustang-gt-and-2016-2020-shelby-gt350-fdlh00067t","title":"Long Tube Headers T304SS 1-7\/8\" x 3\" Equal Length Long Tube Headers Only - Titan Finish (2015-2026 Mustang GT \u0026 2016-2020 Shelby GT350) - FDLH00067T","description":"\u003cp\u003eThe LTH Headers FDLH00067T is a set of equal length long tube headers built for the Coyote 5.0L Mustang GT and the Shelby GT350. The primaries are 1-7\/8 inch tubes formed from 18 gauge 304 stainless steel, and the headers are coated in the manufacturer's Titan matte finish. They are sold as headers only and are designed to bolt in using factory mounting points on the S550 and S650 platforms.\u003c\/p\u003e\n\u003cp\u003eLTH positions these headers as a replacement for the factory exhaust manifolds. According to the manufacturer, the stock parts are built mainly to keep engine noise down, and that approach costs exhaust flow and horsepower. The equal length primary layout is intended to balance low end and top end power. A modular design lets the headers work with OEM exhaust components, so they can go into an otherwise stock car or become part of a larger exhaust build. LTH manufactures them in house in the USA and backs them with a lifetime warranty.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eEqual length long tube header design\u003c\/li\u003e\n\u003cli\u003e1-7\/8 inch primary tubes\u003c\/li\u003e\n\u003cli\u003e18 gauge 304 stainless steel construction\u003c\/li\u003e\n\u003cli\u003eTitan matte finish for added durability\u003c\/li\u003e\n\u003cli\u003eFactory bolt-in design\u003c\/li\u003e\n\u003cli\u003eModular design compatible with OEM exhaust components\u003c\/li\u003e\n\u003cli\u003eTuned for a balance of low end and top end power\u003c\/li\u003e\n\u003cli\u003ePrecision designed for fitment\u003c\/li\u003e\n\u003cli\u003eManufactured in house in the USA\u003c\/li\u003e\n\u003cli\u003eLifetime manufacturer warranty\u003c\/li\u003e\n\u003cli\u003ePart number FDLH00067T\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e18 Gauge 304 Stainless Steel with Titan Finish\u003c\/h3\u003e\u003cp\u003eEach header is fabricated from 18 gauge 304 stainless steel. LTH builds the headers at its own facility in the USA and says they are precision designed to fit properly on the intended vehicles.\u003c\/p\u003e\u003cp\u003eThe exterior carries LTH's proprietary Titan finish. It gives the headers a uniform matte appearance and adds durability beyond bare stainless.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eLTH says the factory exhaust manifolds on the S550 and S650 Mustang are designed mainly to quiet the engine, which limits exhaust flow and horsepower. Replacing them with long tube headers is intended to recover that lost flow.\u003c\/p\u003e\u003cp\u003eThe equal length 1-7\/8 inch primaries were developed to balance low end and top end power rather than favor one end of the rev range. The manufacturer does not publish specific horsepower or torque figures.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDesigned as a factory bolt-in fitment\u003c\/li\u003e\n\u003cli\u003eModular design allows the headers to be used with OEM exhaust components\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eReplaces factory exhaust manifolds that the manufacturer describes as flow-restrictive because they are designed for sound suppression\u003c\/li\u003e\n\u003cli\u003eEqual length 1-7\/8 inch primaries are tuned for a balance of low end and top end power\u003c\/li\u003e\n\u003cli\u003e18 gauge 304 stainless steel with the Titan finish is built for durability\u003c\/li\u003e\n\u003cli\u003eModular design works with OEM components, so the rest of the exhaust does not have to be replaced at the same time\u003c\/li\u003e\n\u003cli\u003eFactory bolt-in design\u003c\/li\u003e\n\u003cli\u003eCovered by a lifetime warranty from LTH\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2015-2026 Ford Mustang GT\u003c\/li\u003e\n\u003cli\u003e2016-2020 Ford Mustang GT350\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eLTH equal length long tube headers\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot included:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eConnection pipes and mid-pipe components; this listing is for the headers only\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eLifetime warranty from LTH Headers\u003c\/p\u003e","brand":"LTH Headers","offers":[{"title":"Default Title","offer_id":68304706633913,"sku":"LTH-FDLH00067T","price":1595.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/LTH-GT350-Headers-06.png?v=1794430313"},{"product_id":"kooks-1-7-8-x-3-ss-shorty-headers-2011-2014-mustang-5-0l-connects-to-oem-cats-11401400","title":"Kooks 1-7\/8\" x 3\" SS Shorty Headers. 2011-2014 Mustang 5.0L (Connects to OEM Cats) - 11401400","description":"\u003cp\u003eThe Kooks 11401400 shorty headers are a stainless steel header set built for 5.0L Mustangs. They take the place of the factory exhaust manifolds and give each cylinder its own primary tube, so exhaust pulses travel a dedicated path to the collector instead of merging in a cast log-style manifold. The tubing is sized at 1-7\/8 inches for the primaries, paired with a 3-inch collector.\u003c\/p\u003e\n\u003cp\u003eThe design is meant to work with the factory catalytic converters, so these headers suit owners who want better exhaust flow while keeping the original converters in place. Kooks includes the hardware needed for installation, which keeps the parts list short for enthusiasts doing the work in their own garage.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStainless steel construction\u003c\/li\u003e\n\u003cli\u003eShorty header design\u003c\/li\u003e\n\u003cli\u003eIndividual primary tubes for each cylinder\u003c\/li\u003e\n\u003cli\u003e1-7\/8 inch primary tube diameter\u003c\/li\u003e\n\u003cli\u003e3 inch collector size\u003c\/li\u003e\n\u003cli\u003eReplaces the factory exhaust manifolds\u003c\/li\u003e\n\u003cli\u003eDesigned to connect to the OEM catalytic converters\u003c\/li\u003e\n\u003cli\u003eInstallation hardware included\u003c\/li\u003e\n\u003cli\u003eKooks part number 11401400\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eStainless Steel Shorty Header Construction\u003c\/h3\u003e\u003cp\u003eKooks builds these shorty headers from stainless steel tubing. Rather than a single cast piece, the header uses individual primaries, one for each cylinder, each measuring 1-7\/8 inches in diameter before feeding into a 3-inch collector.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eThe 1-7\/8 inch individual primaries are sized for high exhaust flow, giving spent gases a less restrictive route out of the engine than the stock manifolds. Because the shorty layout retains the factory catalytic converters, the flow improvement comes at the header itself while the downstream converter setup stays as originally equipped.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMounts in the location of the factory exhaust manifolds\u003c\/li\u003e\n\u003cli\u003eConnects to the original equipment catalytic converters\u003c\/li\u003e\n\u003cli\u003eHardware for installation is included with the headers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eReplaces restrictive factory manifolds with individual-runner stainless steel headers\u003c\/li\u003e\n\u003cli\u003e1-7\/8 inch primaries are sized for increased exhaust flow on the 5.0L\u003c\/li\u003e\n\u003cli\u003eRetains the OEM catalytic converters, so the rest of the factory exhaust layout can stay in place\u003c\/li\u003e\n\u003cli\u003eComes with installation hardware, reducing the need to source extra fasteners\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2011-2026 Ford Mustang (5.0L)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStainless steel shorty headers\u003c\/li\u003e\n\u003cli\u003eInstallation hardware\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Kooks","offers":[{"title":"Default Title","offer_id":68304708960441,"sku":"KOO-11401400","price":1114.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/533dcb8aa14ea878a0a62656740dcd88.jpg?v=1794374998"},{"product_id":"xforce-stainless-steel-17-8-header-kit-with-high-flow-metallic-cats-euro-spec-2018-2023-mustang-h2-fm19-kitb","title":"XForce Stainless Steel 1\"7\/8 Header Kit With High Flow Metallic Cats - EURO SPEC (2018-2023 Mustang) - H2-FM19-KITB","description":"\u003cp\u003eThe XForce H2-FM19-KITB is a stainless steel header kit with 1-7\/8 inch tubing and high flow metallic catalytic converters, built for the European emissions specification version of the 2018-2023 Ford Mustang GT. It combines the headers and catalytic converters in a single kit and finishes at a 2-bolt outlet flange where it meets the rest of the exhaust.\u003c\/p\u003e\n\u003cp\u003eXForce develops its exhaust products at its research and development center in Australia, where systems are designed and dyno tested on a Dynapack Evolution 3000 chassis dynamometer. For owners of Euro-spec Coyote-powered Mustangs who want aftermarket headers while keeping catalytic converters in the system, this kit offers a stainless steel, cat-equipped header option from a manufacturer that tests its designs on a dyno.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStainless steel header construction\u003c\/li\u003e\n\u003cli\u003e1-7\/8 inch header tubing\u003c\/li\u003e\n\u003cli\u003eHigh flow metallic catalytic converters included in the kit\u003c\/li\u003e\n\u003cli\u003e2-bolt outlet flange\u003c\/li\u003e\n\u003cli\u003eDeveloped for European emissions specification 2018-2023 Mustang GT models\u003c\/li\u003e\n\u003cli\u003eDesigned and dyno tested by XForce on a Dynapack Evolution 3000 chassis dynamometer\u003c\/li\u003e\n\u003cli\u003eDeveloped at the XForce research and development center in Australia\u003c\/li\u003e\n\u003cli\u003eManufacturer part number H2-FM19-KITB\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eStainless Steel Headers with Metallic Catalytic Converters\u003c\/h3\u003e\u003cp\u003eThe headers in this kit are made from stainless steel and use 1-7\/8 inch tubing. Instead of ceramic substrates, the catalytic converters use a metallic core and are described by XForce as high flow units. The assembly terminates in a 2-bolt outlet flange.\u003c\/p\u003e\u003cp\u003eXForce states that it applies extensive quality control to its exhaust products and carries out its design and development work in-house at its Australian facility.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eXForce designs its exhaust systems with a focus on maximizing performance and validates them through dyno testing on its Dynapack Evolution 3000 chassis dynamometer. Combining headers with high flow metallic catalytic converters is intended to improve exhaust flow compared with a more restrictive setup, while keeping catalytic converters in the system. XForce does not publish specific horsepower or torque figures for this kit.\u003c\/p\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eIt pairs stainless steel 1-7\/8 inch headers with high flow metallic catalytic converters in one kit, so the headers and cats do not need to be sourced separately.\u003c\/li\u003e\n\u003cli\u003eIt is engineered specifically for the European emissions specification version of the 2018-2023 Mustang GT.\u003c\/li\u003e\n\u003cli\u003eThe design has been dyno tested by XForce on a Dynapack Evolution 3000 chassis dynamometer during development.\u003c\/li\u003e\n\u003cli\u003eThe 2-bolt outlet flange provides a defined connection point to the downstream exhaust.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2018-2023 Ford Mustang\u003c\/li\u003e\u003c\/ul\u003e","brand":"XForce","offers":[{"title":"Default Title","offer_id":68304710664377,"sku":"XFC-H2-FM19-KITB","price":1305.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/c9694736bd7627971770c72b5ca2337d_2.jpg?v=1794436019"},{"product_id":"long-tube-headers-t304ss-1-7-8-x-3-equal-length-long-tube-headers-and-connection-pipes-ecof-cat-titan-finish-2015-2026-mustang-gt-fdlh00062t","title":"Long Tube Headers T304SS 1-7\/8\" x 3\" Equal Length Long Tube Headers and Connection Pipes - EcoF Cat - Titan Finish (2015-2026 Mustang GT) - FDLH00062T","description":"\u003cp\u003eThe LTH Headers FDLH00062T is a set of equal length long tube headers with connection pipes for the 5.0L Coyote-powered Mustang GT. The headers use 1-7\/8\" primaries, are fabricated from 18 gauge 304 stainless steel, and are paired with the LTH EcoF Cat. The whole assembly is coated in LTH's proprietary Titan finish. LTH lists it as a factory bolt-in design, and its modular layout lets it work alongside OEM exhaust components.\u003c\/p\u003e\n\u003cp\u003eLTH says the factory headers are built mainly to keep engine noise down, and that this sound suppression costs the engine flow and horsepower. These long tubes are LTH's answer to that. The equal length primaries are tuned for a balance of low-end and top-end power rather than favoring one end of the rev range. The headers are made in-house in the USA and carry the manufacturer's lifetime warranty, which makes them a sensible choice for Mustang GT owners replacing the stock headers with a stainless long tube system.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eEqual length long tube header design\u003c\/li\u003e\n\u003cli\u003e1-7\/8\" primary tube diameter (listed as 1-7\/8\" x 3\")\u003c\/li\u003e\n\u003cli\u003e18 gauge 304 stainless steel construction\u003c\/li\u003e\n\u003cli\u003eIncludes headers and connection pipes\u003c\/li\u003e\n\u003cli\u003eEcoF Cat\u003c\/li\u003e\n\u003cli\u003eTitan finish, an all-over matte coating intended to add durability\u003c\/li\u003e\n\u003cli\u003eFactory bolt-in design\u003c\/li\u003e\n\u003cli\u003eModular design compatible with OEM components\u003c\/li\u003e\n\u003cli\u003eDeveloped for a balance of low-end and top-end power\u003c\/li\u003e\n\u003cli\u003ePrecision designed for fitment\u003c\/li\u003e\n\u003cli\u003eManufactured in-house in the USA\u003c\/li\u003e\n\u003cli\u003eLifetime manufacturer warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e18 Gauge 304 Stainless Steel with Titan Finish\u003c\/h3\u003e\u003cp\u003eThe headers and connection pipes are built from 18 gauge 304 stainless steel. LTH fabricates them in-house in the USA and says they are precision designed for fitment on the Coyote-powered Mustang GT.\u003c\/p\u003e\u003cp\u003eEvery surface is coated in LTH's exclusive Titan finish. It gives the headers a uniform matte appearance, and LTH says it adds durability.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eLTH says the stock headers are designed to keep engine sound as subdued as possible, and that this approach limits exhaust flow and horsepower. Replacing them with these long tube headers removes that restriction from the exhaust path.\u003c\/p\u003e\u003cp\u003eThe equal length primaries measure 1-7\/8\" in diameter. LTH developed this layout for the best balance of low-end and top-end power, so the design targets usable output across the rev range rather than only at peak rpm.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eListed by the manufacturer as a factory bolt-in design\u003c\/li\u003e\n\u003cli\u003eModular design allows the headers to be used with OEM components\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eReplaces factory headers that the manufacturer says sacrifice flow and horsepower to suppress sound\u003c\/li\u003e\n\u003cli\u003eEqual length 1-7\/8\" primaries developed to balance low-end and top-end power\u003c\/li\u003e\n\u003cli\u003e18 gauge 304 stainless steel construction with a durability-focused Titan matte finish\u003c\/li\u003e\n\u003cli\u003eFactory bolt-in, modular design that works with OEM components\u003c\/li\u003e\n\u003cli\u003eMade in-house in the USA and backed by a lifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2015-2026 Ford Mustang GT\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eEqual length long tube headers\u003c\/li\u003e\n\u003cli\u003eConnection pipes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eLifetime warranty\u003c\/p\u003e","brand":"LTH Headers","offers":[{"title":"Default Title","offer_id":68304710992057,"sku":"LTH-FDLH00062T","price":3395.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/FDLH00018T-01.jpg?v=1794430313"},{"product_id":"american-racing-headers-1-7-8-x-3-long-tube-headers-direct-connection-system-no-cats-2024-2026-mustang-5-0l-160239","title":"American Racing Headers 1-7\/8\" x 3\" Long Tube Headers Direct Connection System - No Cats (2024-2026 Mustang 5.0L) - 160239","description":"\u003cp\u003eThe American Racing Headers 160239 Direct Connection System is a long tube header package for the 2024-2026 Mustang with the 5.0L V8. It pairs 1-7\/8 inch primary tubes, the larger of the two primary sizes American Racing Headers lists for this platform and the one it recommends for max effort builds, with 3 inch exhaust tubing. This version is the No Cats configuration, built to replace the restrictive factory exhaust plumbing on the seventh-generation Mustang.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer-stated gains:\u003c\/strong\u003e American Racing Headers states performance gains of up to 30 RWHP for its Direct Connect header system on the seventh-generation Mustang. The source gives no further test conditions, such as primary tube size, tuning, or supporting modifications.\u003c\/p\u003e\n\u003cp\u003eThe system is designed to work with the stock catback, so it bolts into the existing exhaust without cutting or welding. American Racing Headers builds it in the USA entirely from 304 stainless steel, with heavy laser-cut flanges, hand-ported TIG-welded inlets, and merge collectors with scavenger spikes. It suits owners of a dedicated race or track 5.0L Mustang who want a long tube header that connects directly to their existing exhaust. The manufacturer states it is intended for racing use only.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1-7\/8 inch primary tubes with 3 inch exhaust tubing\u003c\/li\u003e\n\u003cli\u003eNo Cats configuration; no catalytic converters in this system\u003c\/li\u003e\n\u003cli\u003eDirect Connection design intended to work with the stock catback system\u003c\/li\u003e\n\u003cli\u003eNo cutting or welding required to connect to the stock catback\u003c\/li\u003e\n\u003cli\u003eConstructed entirely from 304 stainless steel\u003c\/li\u003e\n\u003cli\u003e3\/8 inch flanges produced by laser cutting to resist warping and hold a consistent seal\u003c\/li\u003e\n\u003cli\u003eInlets ported by hand and joined with TIG welds\u003c\/li\u003e\n\u003cli\u003ePrimary tube routing optimized for fit and performance\u003c\/li\u003e\n\u003cli\u003eMerge collectors fitted with scavenger spikes\u003c\/li\u003e\n\u003cli\u003e100% made in the USA, never outsourced\u003c\/li\u003e\n\u003cli\u003eManufactured exclusively for racing purposes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eUSA-Built 304 Stainless Steel Construction\u003c\/h3\u003e\u003cp\u003eEvery part of this header system is made from 304 stainless steel, and American Racing Headers builds it entirely in the USA without outsourcing any production.\u003c\/p\u003e\u003cp\u003eThe head flanges are 3\/8 inch material, laser cut for accuracy. That thickness helps them stay flat through repeated heat cycles, so the header-to-head joint keeps sealing over time. At the inlets, each port is finished by hand and TIG welded, giving a clean transition from the flange into the primary tube.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eLong 1-7\/8 inch primaries feed merge collectors with scavenger spikes, which smooth the transition where the tubes come together. The system then flows into 3 inch tubing. The primary routing has been optimized for both fit and performance.\u003c\/p\u003e\u003cp\u003eAmerican Racing Headers positions the 1-7\/8 inch primary size for max effort applications. It is meant to release power that the factory exhaust holds back on the 5.0L.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDesigned to connect to the stock catback system\u003c\/li\u003e\n\u003cli\u003eNo cutting or welding is required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eReplaces the restrictive factory exhaust plumbing on a 2024-2026 5.0L Mustang with full long tube headers\u003c\/li\u003e\n\u003cli\u003eThe manufacturer states gains of up to 30 RWHP for its Direct Connect system\u003c\/li\u003e\n\u003cli\u003eConnects to the stock catback without cutting or welding\u003c\/li\u003e\n\u003cli\u003e1-7\/8 inch primaries are the size American Racing Headers recommends for max effort builds\u003c\/li\u003e\n\u003cli\u003e304 stainless steel construction and 3\/8 inch laser-cut flanges support long-term durability and sealing\u003c\/li\u003e\n\u003cli\u003eMade in the USA by American Racing Headers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2024-2026 Ford Mustang (5.0L)\u003c\/li\u003e\u003c\/ul\u003e","brand":"American Racing Headers","offers":[{"title":"Default Title","offer_id":68304714367161,"sku":"ARH-160239","price":1947.61,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/Mustang_Direct_Connection.png?v=1794430313"},{"product_id":"long-tube-headers-t304ss-2-x-3-equal-length-long-tube-headers-and-connection-pipes-ecof-cat-titan-finish-2015-2026-mustang-gt-fdlh00065t","title":"Long Tube Headers T304SS 2\" x 3\" Equal Length Long Tube Headers and Connection Pipes - EcoF Cat - Titan Finish (2015-2026 Mustang GT) - FDLH00065T","description":"\u003cp\u003eThe LTH Headers Equal Length Long Tube Headers (part number FDLH00065T) are a complete header and connection pipe package for the Coyote 5.0L Mustang GT. Built from 18-gauge 304 stainless steel with 2.00 inch primaries, the system pairs equal length long tube headers with matching connection pipes that incorporate LTH's EcoF catalytic converters. The assembly carries LTH's Titan finish, a matte coating applied over the entire part to improve durability.\u003c\/p\u003e\n\u003cp\u003eLTH notes that the factory Mustang GT headers are designed mainly to keep engine noise down, and that this sound-deadening approach restricts exhaust flow and costs horsepower. These long tubes take the opposite approach. LTH says the primary layout is tuned to balance low-end and top-end power, and the system bolts in at the factory mounting points. Its modular design lets it work with OEM exhaust components, and it is manufactured in house in the USA with a lifetime warranty. For owners who want long tube headers with catalytic converters retained in the connection pipes, this is a complete, ready-to-install package.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eEqual length long tube header design\u003c\/li\u003e\n\u003cli\u003e2.00 inch primary tubes\u003c\/li\u003e\n\u003cli\u003e18-gauge 304 stainless steel construction\u003c\/li\u003e\n\u003cli\u003eIncludes headers and connection pipes\u003c\/li\u003e\n\u003cli\u003eEcoF catalytic converters integrated into the connection pipes\u003c\/li\u003e\n\u003cli\u003eTitan finish: an all-over matte coating that adds durability\u003c\/li\u003e\n\u003cli\u003eFactory bolt-in design\u003c\/li\u003e\n\u003cli\u003eModular design that works with OEM exhaust components\u003c\/li\u003e\n\u003cli\u003eDeveloped to balance low-end and top-end power\u003c\/li\u003e\n\u003cli\u003ePrecision designed for accurate fitment\u003c\/li\u003e\n\u003cli\u003eManufactured in house in the USA\u003c\/li\u003e\n\u003cli\u003eLifetime warranty\u003c\/li\u003e\n\u003cli\u003ePart number FDLH00065T\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e18-Gauge 304 Stainless Steel with Titan Finish\u003c\/h3\u003e\u003cp\u003eThe headers and connection pipes are fabricated from 18-gauge 304 stainless steel. LTH builds them in house at its own facility in the USA.\u003c\/p\u003e\u003cp\u003eEvery surface receives LTH's exclusive Titan finish. The coating gives the system a uniform matte appearance and adds durability beyond bare stainless. LTH says the parts are precision designed for fitment and bolt in at the factory mounting locations.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eLTH says the stock headers are built mainly to suppress engine sound, and that this design limits exhaust flow and horsepower. The equal length long tube layout with 2.00 inch primaries replaces that restrictive factory setup.\u003c\/p\u003e\u003cp\u003eAccording to LTH, the header design was developed to deliver the best balance of low-end and top-end power rather than favoring one end of the rev range.\u003c\/p\u003e\u003cp\u003eThe connection pipes use LTH's EcoF catalytic converters, so the system includes catalytic converters in place of an off-road straight pipe arrangement.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFactory bolt-in design that uses the stock mounting points.\u003c\/li\u003e\n\u003cli\u003eThe A\/C bolt must be trimmed so the header can sit flush against the cylinder heads.\u003c\/li\u003e\n\u003cli\u003eThe modular design allows the system to connect to OEM exhaust components.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eReplaces the sound-suppressing factory headers, which LTH says restrict flow and horsepower.\u003c\/li\u003e\n\u003cli\u003eThe equal length long tube design is developed to balance low-end and top-end power.\u003c\/li\u003e\n\u003cli\u003eEcoF catalytic converters are built into the connection pipes, so you do not need to source converters separately.\u003c\/li\u003e\n\u003cli\u003e18-gauge 304 stainless steel with the Titan matte finish is built for durability.\u003c\/li\u003e\n\u003cli\u003eThe modular layout lets you keep OEM downstream exhaust components if you choose.\u003c\/li\u003e\n\u003cli\u003eIt is made in the USA and backed by a lifetime warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2015-2026 Ford Mustang GT\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eEqual length long tube headers\u003c\/li\u003e\n\u003cli\u003eConnection pipes with EcoF catalytic converters\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eLifetime warranty from LTH Headers.\u003c\/p\u003e","brand":"LTH Headers","offers":[{"title":"Default Title","offer_id":68304717676729,"sku":"LTH-FDLH00065T","price":3495.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/FDLH00018T-01_933b97b4-24d8-4f61-a863-ae04f5bd529e.jpg?v=1794430314"},{"product_id":"ultimate-headers-1-7-8-304ss-free-flow-long-tube-headers-2024-2025-mustang-gt-dark-horse-475076","title":"Ultimate Headers 1-7\/8\" 304SS Free Flow Long Tube Headers (2024-2025 Mustang GT \/ Dark Horse)  - 475076","description":"\u003cp\u003eThe Ultimate Headers 475076 is a long tube header kit built for the S650 Mustang GT and Dark Horse and configured around the Gen 4 Coyote V8. Ultimate Headers carried the features of its S550 header kit over to the newer platform. The result is a 304 stainless steel system with 1-7\/8 inch primary tubes, 3 inch connection pipes, and stainless investment cast flanges.\u003c\/p\u003e\n\u003cp\u003eThis kit is aimed at owners of 2024-2025 Mustang GT and Dark Horse models who want to replace the factory exhaust manifolds with a long tube design. It is a bolt-on kit that ships with header bolts, gaskets, and O2 sensor extensions. It is TIG welded, made in the USA, and covered by a limited lifetime warranty from Ultimate Headers.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLong tube header design configured for the Gen 4 Coyote engine in the S650 Mustang\u003c\/li\u003e\n\u003cli\u003e1-7\/8 inch primary tubes\u003c\/li\u003e\n\u003cli\u003e3 inch connection pipes\u003c\/li\u003e\n\u003cli\u003ePremium 304 stainless steel construction\u003c\/li\u003e\n\u003cli\u003eStainless steel investment cast flanges for high clamping force and a leak-free seal\u003c\/li\u003e\n\u003cli\u003eTIG welded construction\u003c\/li\u003e\n\u003cli\u003eBolt-on kit\u003c\/li\u003e\n\u003cli\u003eHeader bolts, gaskets, and O2 sensor extensions included\u003c\/li\u003e\n\u003cli\u003eMade in USA\u003c\/li\u003e\n\u003cli\u003eLimited lifetime warranty\u003c\/li\u003e\n\u003cli\u003eManufacturer part number 475076\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e304 Stainless Steel Construction with Investment Cast Flanges\u003c\/h3\u003e\u003cp\u003eThe headers are fabricated from premium 304 stainless steel, the material Ultimate Headers specifies for this kit. The welds are TIG welded, a process the manufacturer chose for weld quality.\u003c\/p\u003e\u003cp\u003eThe flanges are stainless steel investment castings. Ultimate Headers designed them to deliver strong clamping force against the cylinder head so the header-to-head joint stays leak free. The kit is manufactured in the USA.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eThe system pairs 1-7\/8 inch primaries with 3 inch connection pipes in a long tube layout. Ultimate Headers developed the design from its S550 kit and adapted it to the Gen 4 Coyote engine used in the 2024-2025 Mustang GT and Dark Horse.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDesigned by the manufacturer as a bolt-on kit\u003c\/li\u003e\n\u003cli\u003eHeader bolts and gaskets are supplied with the kit\u003c\/li\u003e\n\u003cli\u003eO2 sensor extensions are included to accommodate the relocated sensor positions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLong tube configuration with 1-7\/8 inch primaries and 3 inch connection pipes, specific to the Gen 4 Coyote\u003c\/li\u003e\n\u003cli\u003e304 stainless steel and TIG welding for durable construction\u003c\/li\u003e\n\u003cli\u003eInvestment cast stainless flanges help maintain a leak-free seal at the cylinder head\u003c\/li\u003e\n\u003cli\u003eComes with header bolts, gaskets, and O2 extensions, so those parts do not need to be sourced separately\u003c\/li\u003e\n\u003cli\u003eMade in USA and backed by a limited lifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2024-2025 Ford Mustang Dark Horse \/ GT\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLong tube headers\u003c\/li\u003e\n\u003cli\u003eHeader bolts\u003c\/li\u003e\n\u003cli\u003eGaskets\u003c\/li\u003e\n\u003cli\u003eO2 sensor extensions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eLimited lifetime warranty from Ultimate Headers\u003c\/p\u003e","brand":"Ultimate Headers","offers":[{"title":"Default Title","offer_id":68304903930041,"sku":"ULH-475076","price":1839.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/s650_catted_53756fa4-46f6-447e-b20b-0cdc1adef52f.jpg?v=1794436024"},{"product_id":"kooks-1-3-4-x-3-ss-headers-2015-2026-mustang-gt-5-0l-11512202","title":"Kooks 1-3\/4\" x 3\" SS Headers (2015-2026 Mustang GT 5.0L) - 11512202","description":"\u003cp\u003eThe Kooks 11512202 is a set of 1-3\/4\" x 3\" long tube headers built from stainless steel for the Ford Mustang GT with the 5.0L 4V V8. They replace the factory exhaust manifolds with 1-3\/4\" mandrel-bent primary tubes, 3\/8\" thick laser-cut flanges, and a round port design that bolts up using the stock bolt pattern. Kooks builds them from T304 aircraft-quality stainless steel and handcrafts them in the USA.\u003c\/p\u003e\n\u003cp\u003eThese headers are meant for owners building a complete long tube exhaust on a 5.0L Mustang GT. They mate to Kooks front connection pipes with OEM adapters, or to a Kooks X-pipe or H-pipe exhaust. Kooks also offers them in its Header and Connection Kit packages, part numbers 1151H222 and 1151H232. The company has built headers and exhaust systems for street, race, and off-road use since 1962, validates its parts through dyno and track testing, and covers them with a limited lifetime warranty for the original purchaser.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLong tube header design in 1-3\/4\" x 3\" sizing\u003c\/li\u003e\n\u003cli\u003e304 stainless steel construction, described by Kooks as T304 aircraft-quality stainless\u003c\/li\u003e\n\u003cli\u003e1-3\/4\" mandrel-bent primary tubes\u003c\/li\u003e\n\u003cli\u003e3\/8\" thick laser-cut flanges\u003c\/li\u003e\n\u003cli\u003eRound port configuration\u003c\/li\u003e\n\u003cli\u003eRetains the stock bolt pattern\u003c\/li\u003e\n\u003cli\u003eShips with 755392 gaskets\u003c\/li\u003e\n\u003cli\u003eOxygen sensor extension harnesses included: one CAS-105979 for 2015-2017 cars and two CAS-109677-8 for 2018 and newer cars\u003c\/li\u003e\n\u003cli\u003eBK101 and BK107 bolt kits listed for installation\u003c\/li\u003e\n\u003cli\u003eHandcrafted in the USA by an independently owned, family-run company\u003c\/li\u003e\n\u003cli\u003eAlso offered within Kooks Header and Connection Kits 1151H222 and 1151H232\u003c\/li\u003e\n\u003cli\u003eManufacturer part number 11512202\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eT304 Stainless Steel Construction\u003c\/h3\u003e\u003cp\u003eKooks builds these headers from T304 stainless steel, which the company calls aircraft quality. The primaries are 1-3\/4\" tubes formed by mandrel bending, so each bend keeps its full diameter rather than being crushed during forming.\u003c\/p\u003e\u003cp\u003eThe cylinder head flanges are laser cut from 3\/8\" thick plate and use a round port shape. Because the flanges follow the stock bolt pattern, the headers fasten to the factory mounting points on the cylinder heads.\u003c\/p\u003e\u003cp\u003eEvery set is handcrafted in the USA. Kooks has been family led for three generations, remains independently owned, and points to championships and records earned in NHRA, IHRA, NMCA, NMRA, NASCAR, NASA, SCCA, and other sanctioning bodies.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eKooks puts its headers and exhaust products through dyno and track testing, and develops them with the aim of maximizing power. The 1-3\/4\" mandrel-bent primaries and long tube layout are the core of that design on the 5.0L 4V engine.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe headers connect to Kooks front connection pipes with OEM adapters, or to a Kooks X-pipe or H-pipe exhaust; one of these is needed to finish the install.\u003c\/li\u003e\n\u003cli\u003eThe 755392 gaskets and BK101 and BK107 bolt kits are listed for installation.\u003c\/li\u003e\n\u003cli\u003eOxygen sensor extension harnesses are supplied to reach the relocated sensors: CAS-105979 for 2015-2017 cars and CAS-109677-8 (two pieces) for 2018 and newer cars.\u003c\/li\u003e\n\u003cli\u003eThe flanges use the stock bolt pattern.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eReplaces the factory manifolds with a long tube design built around 1-3\/4\" mandrel-bent primaries.\u003c\/li\u003e\n\u003cli\u003eT304 stainless construction and 3\/8\" laser-cut flanges are suited to an engine bay that sees repeated heat cycles.\u003c\/li\u003e\n\u003cli\u003eThe stock bolt pattern lets the headers mount to the factory points on the heads.\u003c\/li\u003e\n\u003cli\u003eOxygen sensor extension harnesses are supplied, so no separate wiring needs to be sourced.\u003c\/li\u003e\n\u003cli\u003eThey form the base of a complete Kooks exhaust when paired with Kooks connection pipes, an X-pipe, or an H-pipe.\u003c\/li\u003e\n\u003cli\u003eBacked by a Kooks limited lifetime warranty for the original purchaser.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2026 Ford Mustang GT (5.0L)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLong tube headers (pair)\u003c\/li\u003e\n\u003cli\u003e755392 gaskets\u003c\/li\u003e\n\u003cli\u003eCAS-105979 oxygen sensor extension harness for 2015-2017 cars (1)\u003c\/li\u003e\n\u003cli\u003eCAS-109677-8 oxygen sensor extension harnesses for 2018 and newer cars (2)\u003c\/li\u003e\n\u003cli\u003eBK101 and BK107 bolt kits\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot included:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eKooks front connection pipes with OEM adapters, or a Kooks X-pipe or H-pipe exhaust, needed to complete the installation\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eKooks limited lifetime warranty to the original purchaser.\u003c\/p\u003e","brand":"Kooks","offers":[{"title":"Default Title","offer_id":68304903995577,"sku":"KOO-11512202","price":1181.44,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/74eb7dc2fd732b98b5692cb844efe957_b189019e-b565-4528-96d1-880645119970.png?v=1794375631"},{"product_id":"stainless-works-15-24-mustang-headers-stainless-power-aftermarket-connect-1-7-8in","title":"Stainless Works 15-24 Mustang Headers Stainless Power Aftermarket Connect 1-7\/8in.","description":"\u003cp\u003eThis Stainless Works header set is designed for 2015-2024 Ford Mustang applications and is built from stainless steel with 1-7\/8 in. tubing. It is part of the Stainless Power lineup and uses an aftermarket connect configuration, meaning it is intended to mate with an aftermarket exhaust system downstream instead of the factory components.\u003c\/p\u003e\n\u003cp\u003eHeaders replace the restrictive factory exhaust manifold and are often among the first exhaust upgrades for owners building a more capable street or track Mustang. If you already run an aftermarket exhaust or plan to install one, this aftermarket connect version from Stainless Works gives you a stainless header that is meant to tie into that setup.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStainless Works Stainless Power header\u003c\/li\u003e\n\u003cli\u003eStainless steel construction\u003c\/li\u003e\n\u003cli\u003e1-7\/8 in. tube size\u003c\/li\u003e\n\u003cli\u003eAftermarket connect configuration for mating to an aftermarket exhaust system\u003c\/li\u003e\n\u003cli\u003eListed for 2015-2024 Ford Mustang\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eStainless Steel Construction\u003c\/h3\u003e\u003cp\u003eStainless Works builds this header from stainless steel. The manufacturer's listing does not specify the grade of stainless used or other construction details.\u003c\/p\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eReplaces the factory exhaust manifold with a stainless steel header\u003c\/li\u003e\n\u003cli\u003e1-7\/8 in. tubing as specified by Stainless Works\u003c\/li\u003e\n\u003cli\u003eAftermarket connect design suits Mustangs that already use, or will use, an aftermarket exhaust system\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2015-2024 Ford Mustang\u003c\/li\u003e\u003c\/ul\u003e","brand":"Stainless Works","offers":[{"title":"Default Title","offer_id":68304904159417,"sku":"SSWSM24H3CATLG","price":1519.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/b4f71b7f35508a9ccbba4b678cc2dc41L.jpg?v=1794436025"},{"product_id":"bbk-1-3-4-long-tube-headers-titanium-ceramic-2011-2017-mustang-v6-1642","title":"BBK 1-3\/4 Long Tube Headers (Titanium Ceramic) (2011-2017 Mustang V6) - 1642","description":"\u003cp\u003eThe BBK 1642 is a set of full-length long tube headers for the 3.7L V6 Mustang, built with 1-3\/4 inch CNC mandrel-bent primary tubing and solid 3\/8 inch laser-cut exhaust flanges. The title lists a titanium ceramic finish. BBK's research and development team designed these headers to extract more horsepower and torque from the V6 platform, replacing the factory exhaust manifolds with a long tube design.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer-stated gains:\u003c\/strong\u003e BBK reports gains of around 10+ horsepower and 5 ft-lbs of torque from initial testing on a V6 Mustang with a 6-speed manual transmission, run with a high flow catted X pipe.\u003c\/p\u003e\n\u003cp\u003eThese headers are intended for V6 Mustang owners building a more capable exhaust system from the engine back. BBK includes new gaskets, the required hardware, and detailed instructions. The headers are designed to be paired with one of BBK's short mid X or H pipes to finish the installation. Owners of 2015-2017 models will also need BBK's front O2 sensor wire harness extensions, which are sold separately.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1-3\/4 inch primary tubing\u003c\/li\u003e\n\u003cli\u003eCNC mandrel-bent tube construction\u003c\/li\u003e\n\u003cli\u003eSolid 3\/8 inch laser-cut exhaust flanges\u003c\/li\u003e\n\u003cli\u003eFull-length long tube header design for the 3.7L V6 Mustang\u003c\/li\u003e\n\u003cli\u003eTitanium ceramic finish, as listed in the product title\u003c\/li\u003e\n\u003cli\u003eIncludes new gaskets, required hardware, and detailed installation instructions\u003c\/li\u003e\n\u003cli\u003eDesigned to pair with BBK short mid X pipes (2011-2014) or short mid H pipes (2015-2017)\u003c\/li\u003e\n\u003cli\u003eBBK part number 1642\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCNC Mandrel-Bent Tubing and 3\/8-Inch Laser-Cut Flanges\u003c\/h3\u003e\u003cp\u003eBBK forms the 1-3\/4 inch primary tubes on CNC mandrel-bending equipment. This process produces repeatable bends and is part of the rugged design BBK describes for this header.\u003c\/p\u003e\u003cp\u003eThe exhaust flanges are cut from solid 3\/8 inch material using a laser. This gives the headers a thick, precisely shaped mounting surface where they bolt to the cylinder heads.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eBBK built these long tube headers specifically to increase horsepower and torque on the V6 Mustang. In initial testing on a 6-speed manual car with a high flow catted X pipe, BBK measured roughly 10+ horsepower and 5 ft-lbs of torque.\u003c\/p\u003e\u003cp\u003eBecause long tube headers move the catalytic converters and O2 sensors farther back in the exhaust, some vehicles may set a check engine light when these headers are run with high flow mid pipes. BBK explains that the factory computer monitors converter temperature, and the relocated converter takes longer to heat up. According to BBK, this is not a physical fault with the headers, converters, or O2 sensors, and it does not cause a drivability problem. A vehicle tune can eliminate the check engine light.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDetailed installation instructions, new gaskets, and the required hardware are included.\u003c\/li\u003e\n\u003cli\u003eA BBK short mid pipe is needed to complete the installation.\u003c\/li\u003e\n\u003cli\u003eFor 2011-2014 models: Part# 1461, 2-3\/4 inch Short Mid X Pipe with converters, or Part# 1462, 2-3\/4 inch Short Mid X Pipe Off Road.\u003c\/li\u003e\n\u003cli\u003eFor 2015-2017 models: Part# 1465, 2-1\/2 inch Short Mid H Pipe with converters, or Part# 14650, 2-1\/2 inch Short Mid H Pipe Off Road.\u003c\/li\u003e\n\u003cli\u003eAll 2015-2017 Mustang V6 installations require front O2 sensor wire harness extensions, BBK Part# 1119, purchased separately.\u003c\/li\u003e\n\u003cli\u003eA check engine light may appear with long tube headers and high flow mid pipes. BBK states that a vehicle tune can eliminate it.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eReplaces the factory exhaust manifolds with a long tube design that BBK developed specifically to add power on the 3.7L V6 Mustang.\u003c\/li\u003e\n\u003cli\u003eBBK's own testing showed around 10+ horsepower and 5 ft-lbs of torque with a high flow catted X pipe.\u003c\/li\u003e\n\u003cli\u003e1-3\/4 inch CNC mandrel-bent tubing and solid 3\/8 inch laser-cut flanges give the headers a robust build.\u003c\/li\u003e\n\u003cli\u003eGaskets, hardware, and instructions come in the box, so you do not have to source them separately.\u003c\/li\u003e\n\u003cli\u003eBBK offers matching short mid X and H pipes, with or without converters, to build a complete system.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2011-2017 Ford Mustang V6 (3.7L)\u003c\/li\u003e\n\u003cli\u003e2015-2017 Ford Mustang V6\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLong tube headers (pair)\u003c\/li\u003e\n\u003cli\u003eNew gaskets\u003c\/li\u003e\n\u003cli\u003eRequired hardware\u003c\/li\u003e\n\u003cli\u003eDetailed installation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot included:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFront O2 sensor wire harness extensions, BBK Part# 1119, required for all 2015-2017 Mustang V6 installations\u003c\/li\u003e\n\u003cli\u003eShort mid X pipe or H pipe needed to complete the installation (BBK Part# 1461, 1462, 1465, or 14650 depending on model year)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BBK","offers":[{"title":"Default Title","offer_id":68304905306297,"sku":"BBK-1642","price":649.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/1642_Titanium_Web_1500x1500_v2_edfa6ec0-00c0-4578-8139-03b84e03c619.jpg?v=1794430541"},{"product_id":"lth-2015-ford-mustang-gt-resonator-delete-with-stainless-steel-construction-2-5","title":"LTH 2015 Ford Mustang GT Resonator Delete with Stainless Steel Construction (2.5\")","description":"\u003cp\u003eThe LTH Headers Resonator Delete for the 2015 Ford Mustang GT replaces the factory resonators with stainless steel tubing that runs between the headers and the rear exhaust section. Removing the restrictive stock resonators opens the exhaust path for maximum flow and gives the car a more pronounced exhaust note. LTH presents it as a way to get the most horsepower from its Long Tube Headers, and its modular layout lets it work with OEM components.\u003c\/p\u003e\n\u003cp\u003eLTH designed the pipe to balance low-end and top-end power and engineered it for precise fitment. It is built in house in the USA, finished with LTH's Titan coating for durability, and backed by a lifetime warranty. Owners who want to change both sound and performance can pair it with a muffler delete. For Mustang GT owners building a more open, better-flowing exhaust, it is a direct, stainless steel replacement for the factory resonator section.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRemoves the restrictive factory resonators for maximum exhaust flow\u003c\/li\u003e\n\u003cli\u003eStainless steel construction\u003c\/li\u003e\n\u003cli\u003eTitan finish for added durability\u003c\/li\u003e\n\u003cli\u003eModular design compatible with OEM components\u003c\/li\u003e\n\u003cli\u003eTuned for a balance of low-end and top-end power\u003c\/li\u003e\n\u003cli\u003ePrecision designed for accurate fitment\u003c\/li\u003e\n\u003cli\u003eConnects the headers to the rear exhaust section\u003c\/li\u003e\n\u003cli\u003eCan be combined with a muffler delete\u003c\/li\u003e\n\u003cli\u003eManufactured in house by LTH in the USA\u003c\/li\u003e\n\u003cli\u003eLifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eStainless Steel Construction with Titan Finish\u003c\/h3\u003e\u003cp\u003eThe resonator delete is made from stainless steel and coated with LTH's Titan finish, which the manufacturer applies for added durability. LTH builds the part in house in the USA and designed it for precise fitment on the Mustang GT.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eDeleting the factory resonators removes a restriction in the exhaust path, which LTH says allows maximum flow and produces a more aggressive exhaust sound. The pipe was developed to balance low-end and top-end power rather than favor one end of the rev range.\u003c\/p\u003e\u003cp\u003eLTH positions this resonator delete as a complement to its Long Tube Headers to get the most horsepower from that setup. It can also be paired with a muffler delete to further change the car's sound and performance.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eInstalls in place of the factory resonators, connecting the headers to the rear exhaust section\u003c\/li\u003e\n\u003cli\u003eModular design allows use with OEM exhaust components\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eEliminates the factory resonators, which restrict flow\u003c\/li\u003e\n\u003cli\u003eProduces a louder, more aggressive exhaust note than the stock resonated system\u003c\/li\u003e\n\u003cli\u003eWorks with OEM components thanks to its modular design, so the rest of the system does not have to be replaced\u003c\/li\u003e\n\u003cli\u003eComplements LTH Long Tube Headers and can be combined with a muffler delete\u003c\/li\u003e\n\u003cli\u003eStainless steel with a Titan finish, built in the USA and covered by a lifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2015 Ford Mustang GT\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eLifetime warranty from LTH Headers (full terms not specified in the source)\u003c\/p\u003e","brand":"LTH Headers","offers":[{"title":"Default Title","offer_id":68304905371833,"sku":"LTH-FDRD00001T","price":245.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/FDRD00001T-01.jpg?v=1794435508"},{"product_id":"bbk-1-3-4-long-tube-headers-titanium-ceramic-2011-2023-mustang-gt-1633","title":"BBK 1-3\/4 Long Tube Headers - Titanium Ceramic (2011-2023 Mustang GT) - 1633","description":"\u003cp\u003eThe BBK 1633 is a set of 1-3\/4 inch long tube headers in a titanium ceramic finish, built for late-model Ford Mustang GT applications and the Boss 302. They replace the factory exhaust manifolds with CNC mandrel-bent primaries that carry exhaust gases to ball and socket collectors. The design aims to improve exhaust flow out of the cylinder heads and help the engine make more power.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer-stated gains:\u003c\/strong\u003e BBK Performance Parts states that a gain of 30+ horsepower is typical. The manufacturer does not specify test conditions, supporting modifications, or tuning requirements.\u003c\/p\u003e\n\u003cp\u003eAccording to BBK Performance Parts, these headers typically add 30 or more horsepower. They are built from 16 gauge steel tubing with 3\/8 inch thick flanges that resist heat distortion. They work with both manual and automatic transmissions, and gaskets and mounting hardware are included. For owners who want a long tube header with a durable finish and a leak-resistant collector, the 1633 covers the main bases of a header swap in one package.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLong tube header design with 1-3\/4 inch primary tubes\u003c\/li\u003e\n\u003cli\u003eCNC mandrel-bent primaries intended to maximize exhaust flow\u003c\/li\u003e\n\u003cli\u003eBall and socket collector design engineered to be leak free\u003c\/li\u003e\n\u003cli\u003e16 gauge steel tubing construction\u003c\/li\u003e\n\u003cli\u003e3\/8 inch thick header flanges that help prevent heat distortion\u003c\/li\u003e\n\u003cli\u003eTitanium ceramic finish\u003c\/li\u003e\n\u003cli\u003eCompatible with both manual and automatic transmissions\u003c\/li\u003e\n\u003cli\u003eGaskets and hardware included\u003c\/li\u003e\n\u003cli\u003eBBK part number 1633\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e16 Gauge Steel Tubing with 3\/8 Inch Flanges\u003c\/h3\u003e\u003cp\u003eBBK forms the primaries of the 1633 headers from 16 gauge steel tubing and bends them on CNC mandrel equipment. Mandrel bending holds the tube diameter consistent through each bend, so the full 1-3\/4 inch passage is kept from the head flange to the collector.\u003c\/p\u003e\u003cp\u003eThe head flanges are 3\/8 inch thick. Thick flanges like these resist warping under repeated heat cycles, which helps the header keep a consistent seal against the cylinder head over time. Each header ends in a ball and socket collector, a joint style BBK uses to provide a leak-free connection to the rest of the exhaust system. The headers come in a titanium ceramic finish.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eThe 1-3\/4 inch primaries are sized to move a high volume of exhaust gas out of the combustion chambers, and the mandrel bends avoid the restrictions found in crush-bent tubing. BBK attributes a typical increase of 30 or more horsepower to this design.\u003c\/p\u003e\u003cp\u003eThe ball and socket collectors keep the exhaust sealed at the collector junction. This prevents leaks that can cause ticking noises, lost exhaust energy, and inaccurate readings at downstream sensors.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe headers can be used with either a manual or an automatic transmission.\u003c\/li\u003e\n\u003cli\u003eGaskets and mounting hardware are supplied with the headers.\u003c\/li\u003e\n\u003cli\u003eBBK specifies that owners of 2018 and newer vehicles must check the box label and the passenger side header before installation and confirm that REVB is marked on each. If the REVB marking is not visible, the headers will not fit those vehicles.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eReplaces restrictive factory manifolds with 1-3\/4 inch long tube primaries, which BBK says typically add 30+ horsepower\u003c\/li\u003e\n\u003cli\u003eMandrel-bent tubing keeps a consistent internal diameter for unrestricted flow\u003c\/li\u003e\n\u003cli\u003e3\/8 inch thick flanges resist heat distortion and help maintain a reliable seal at the cylinder head\u003c\/li\u003e\n\u003cli\u003eThe ball and socket collector design is engineered to stay leak free\u003c\/li\u003e\n\u003cli\u003eWorks with both manual and automatic transmission cars\u003c\/li\u003e\n\u003cli\u003eGaskets and hardware are included, so you do not need to source them separately\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2011-2014 Ford Mustang Boss 302 \/ GT\u003c\/li\u003e\n\u003cli\u003e2015-2024 Ford Mustang GT\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment notes:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003ewill NOT FIT your car\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLong tube headers (pair)\u003c\/li\u003e\n\u003cli\u003eGaskets\u003c\/li\u003e\n\u003cli\u003eHardware\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BBK Performance Parts","offers":[{"title":"Default Title","offer_id":68304905699513,"sku":"BBK-1633","price":849.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/1633_Titanium_Web_1500x1500_v2.jpg?v=1794430542"},{"product_id":"jba-2011-2014-mustang-5-0l-1-7-8-long-tube-headers-bare-stainless","title":"JBA 2011-2014 Mustang 5.0L 1-7\/8\" Long Tube Headers (Bare Stainless)","description":"\u003cp\u003eThe JBA 1-7\/8 inch Long Tube Headers are a complete stainless steel long-tube header system engineered for the 5.0L-powered Ford Mustang introduced for the 2011 model year. This version is supplied in a bare stainless finish. It replaces the factory exhaust manifolds with mandrel-bent primary tubes that lead into a JBA collector, and JBA states the design was developed specifically around the redesigned chassis and engine of these cars.\u003c\/p\u003e\n\u003cp\u003eFor owners of 5.0L Mustangs who want to improve how the engine breathes on the exhaust side, these headers provide large 1-7\/8 inch primaries, 3\/8 inch thick laser-cut flanges, and JBA's patented Firecone merged collector. JBA describes the system as a bolt-on upgrade that increases horsepower and torque across the RPM range, and it ships with the hardware and instructions needed for installation.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLong-tube header design for 5.0L Mustang applications\u003c\/li\u003e\n\u003cli\u003e1-7\/8 inch diameter primary tubes\u003c\/li\u003e\n\u003cli\u003eMandrel-bent stainless steel primary tubes\u003c\/li\u003e\n\u003cli\u003e3\/8 inch thick laser-cut flanges\u003c\/li\u003e\n\u003cli\u003ePatented JBA Firecone merged collector\u003c\/li\u003e\n\u003cli\u003eBare stainless finish\u003c\/li\u003e\n\u003cli\u003eComplete stainless steel header system\u003c\/li\u003e\n\u003cli\u003eBolt-on design according to JBA\u003c\/li\u003e\n\u003cli\u003eSupplied with complete hardware and instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMandrel-Bent Stainless Steel Construction\u003c\/h3\u003e\u003cp\u003eJBA builds these long-tube headers entirely from stainless steel and leaves them in a bare stainless finish. The primary tubes are mandrel bent, a forming process that keeps the tube diameter consistent through each bend instead of crimping it as the pipe is shaped.\u003c\/p\u003e\u003cp\u003eEach header uses 3\/8 inch thick flanges that are laser cut. JBA specifies this extra-thick flange material as a key part of the design. The primaries come together in JBA's patented Firecone merged collector.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eJBA states that these headers increase both horsepower and torque throughout the RPM range on the 5.0L engine. The 1-7\/8 inch primary tubes are larger than the factory manifold passages, and the long-tube layout, together with the Firecone merged collector, is intended to take advantage of the engine and chassis design of these Mustangs.\u003c\/p\u003e\u003cp\u003eJBA does not publish specific horsepower or torque figures for this header in the source material.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eJBA describes these headers as a bolt-on installation\u003c\/li\u003e\n\u003cli\u003eComplete hardware and instructions are included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eReplaces the factory exhaust manifolds with a long-tube design that JBA states adds horsepower and torque across the RPM range\u003c\/li\u003e\n\u003cli\u003eMandrel-bent 1-7\/8 inch stainless primaries maintain consistent tube diameter through the bends\u003c\/li\u003e\n\u003cli\u003e3\/8 inch laser-cut flanges provide a thick, precisely cut mounting surface at the cylinder head\u003c\/li\u003e\n\u003cli\u003eIncludes JBA's patented Firecone merged collector\u003c\/li\u003e\n\u003cli\u003eArrives with the hardware and instructions needed for installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2011-2026 Ford Mustang (5.0L)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLong tube headers (bare stainless)\u003c\/li\u003e\n\u003cli\u003eComplete hardware\u003c\/li\u003e\n\u003cli\u003eInstructions\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JBA","offers":[{"title":"Default Title","offer_id":68304905765049,"sku":"JBA-6685S","price":1008.61,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/4c3bb7317cd0ff76f86ec544d338f21b_1.jpg?v=1794436034"},{"product_id":"bbk-1-3-4-long-tube-headers-ceramic-2011-2023-mustang-gt-16330","title":"BBK 1-3\/4 Long Tube Headers - Ceramic (2011-2023 Mustang GT) - 16330","description":"\u003cp\u003eThe BBK Performance 16330 is a full-length long tube header set for Coyote-powered Mustang GT and Boss 302 models. It uses 1-3\/4 inch CNC mandrel-bent primary tubes, a ball-and-socket collector, and a polished silver ceramic finish. It replaces the factory exhaust manifolds with a longer primary design that improves exhaust flow, and BBK says this adds horsepower and torque throughout the RPM range.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer-stated gains:\u003c\/strong\u003e BBK states that a gain of 30 or more horsepower is typical. No test vehicle, dyno, or supporting modifications are specified.\u003c\/p\u003e\n\u003cp\u003eThis header is for owners building a Coyote-powered Mustang who want more output and a deeper, throatier exhaust note. The construction specs are 16 gauge steel tubing, 3\/8 inch thick die-stamped flanges, and pressure testing for leaks. The kit includes gaskets and hardware. Installation requires a BBK short mid pipe and front O2 sensor harness extensions, both sold separately, so plan for them when ordering.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1-3\/4 inch primary tubes, CNC mandrel bent for consistent diameter through the bends\u003c\/li\u003e\n\u003cli\u003eFull-length (long tube) primary design for unrestricted exhaust flow\u003c\/li\u003e\n\u003cli\u003eBall-and-socket collector for a leak-free connection\u003c\/li\u003e\n\u003cli\u003e16 gauge steel tubing\u003c\/li\u003e\n\u003cli\u003e3\/8 inch thick die-stamped header flanges that resist heat distortion\u003c\/li\u003e\n\u003cli\u003ePolished silver ceramic finish\u003c\/li\u003e\n\u003cli\u003eEvery header pressure tested for leaks\u003c\/li\u003e\n\u003cli\u003eNew gaskets and hardware included\u003c\/li\u003e\n\u003cli\u003eBolts in directly when paired with a BBK Performance short mid pipe\u003c\/li\u003e\n\u003cli\u003eManufacturer part number 16330\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e16 Gauge Steel with Ceramic Finish and 3\/8 Inch Flanges\u003c\/h3\u003e\u003cp\u003eBBK forms the primaries from 16 gauge steel tubing, bent on CNC mandrel equipment to 1-3\/4 inch diameter. Mandrel bending keeps the tube from collapsing or narrowing at each bend, so the full cross-section is available along the entire length of each primary.\u003c\/p\u003e\u003cp\u003eThe cylinder head flanges are die stamped from 3\/8 inch thick material. The heavy flange resists warping from repeated heat cycles, which helps keep a good gasket seal at the head over time. The primaries merge into a ball-and-socket collector designed to seal without leaks at the downstream connection.\u003c\/p\u003e\u003cp\u003eBBK pressure tests each header for leaks before it leaves the factory. The headers have a polished silver ceramic finish.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eLong primaries and the larger 1-3\/4 inch tube diameter reduce exhaust restriction compared with the factory manifolds. BBK says this produces more horsepower and torque across the RPM range, with gains of 30 or more horsepower being typical.\u003c\/p\u003e\u003cp\u003eBBK also notes a change in sound: a fuller, throatier exhaust note from the Coyote V8.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDesigned to bolt in directly when installed with a BBK Performance short mid pipe; the mid pipe is required to complete the installation.\u003c\/li\u003e\n\u003cli\u003eNew gaskets and hardware are supplied with the kit.\u003c\/li\u003e\n\u003cli\u003eFront O2 sensor wire harness extensions are required and must be ordered for your Coyote generation: GEN1 Coyote (2011-2014) uses BBK part number 1112 or 16332, GEN2 Coyote (2015-2017) uses part number 1119, and GEN3 Coyote (2018-2019) uses part number 1121.\u003c\/li\u003e\n\u003cli\u003e2018 and newer vehicles: before installing, confirm that REVB appears on both the box label and the passenger side header. Headers without the REVB marking will not fit these vehicles.\u003c\/li\u003e\n\u003cli\u003eNot C.A.R.B. approved. Cannot be installed on any emission-controlled vehicle in California.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eReplaces the factory manifolds with full-length 1-3\/4 inch mandrel-bent primaries for improved exhaust flow\u003c\/li\u003e\n\u003cli\u003eBBK states a typical gain of 30 or more horsepower\u003c\/li\u003e\n\u003cli\u003e3\/8 inch flanges and 16 gauge tubing are built for long-term durability under heat\u003c\/li\u003e\n\u003cli\u003eBall-and-socket collector and factory pressure testing address leaks at the joints\u003c\/li\u003e\n\u003cli\u003eGaskets and hardware come in the box\u003c\/li\u003e\n\u003cli\u003eGives a deeper, throatier Coyote exhaust note\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2011-2024 Ford Mustang Boss 302 \/ GT\u003c\/li\u003e\n\u003cli\u003e2011-2014 Ford Mustang Boss 302 \/ GT\u003c\/li\u003e\n\u003cli\u003e2015-2024 Ford Mustang GT\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment notes:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003ewill NOT FIT your car and you will need to exchange - Got Questions Call Us to confirm verification - 561-753-8105\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLong tube headers\u003c\/li\u003e\n\u003cli\u003eGaskets\u003c\/li\u003e\n\u003cli\u003eHardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot included:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eFront O2 sensor wire harness extensions (required; BBK part number 1112 or 16332 for 2011-2014, 1119 for 2015-2017, 1121 for 2018-2019)\u003c\/li\u003e\u003c\/ul\u003e","brand":"BBK Performance Parts","offers":[{"title":"Default Title","offer_id":68304905994425,"sku":"BBK-16330","price":899.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/16330_v1.jpg?v=1794430544"},{"product_id":"long-tube-headers-t304ss-1-7-8-x-3-equal-length-long-tube-headers-and-connection-pipes-high-flow-metallic-cat-titan-finish-2015-2026-mustang-gt-fdlh00061t","title":"Long Tube Headers T304SS 1-7\/8\" x 3\" Equal Length Long Tube Headers and Connection Pipes - High Flow Metallic CAT - Titan Finish (2015-2026 Mustang GT) - FDLH00061T","description":"\u003cp\u003eThe LTH Headers FDLH00061T is an equal length long tube header system for the Coyote 5.0L Mustang GT. It pairs 1-7\/8 inch primary headers with connection pipes that carry high flow metallic catalytic converters, all fabricated from 18 gauge 304 stainless steel and coated in the company's Titan matte finish. LTH lists the system as a factory bolt-in design, and the title gives its sizing as 1-7\/8 inch x 3 inch.\u003c\/p\u003e\n\u003cp\u003eLTH notes that the factory headers on the 5.0L Mustang GT are built mainly to suppress engine sound, and that this approach costs flow and horsepower. This system replaces them with equal length long tube runners that LTH tuned for a balance of low end and top end power. Its modular layout lets it work with OEM components, and it is built in house in the USA. It suits Mustang GT owners who want a stainless long tube header with catalytic converters already in the connection pipes.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eEqual length long tube header design\u003c\/li\u003e\n\u003cli\u003e1-7\/8 inch primary tubes (title lists sizing as 1-7\/8 inch x 3 inch)\u003c\/li\u003e\n\u003cli\u003e18 gauge 304 stainless steel construction\u003c\/li\u003e\n\u003cli\u003eConnection pipes with high flow metallic catalytic converters\u003c\/li\u003e\n\u003cli\u003eTitan finish with an all-over matte appearance and added durability\u003c\/li\u003e\n\u003cli\u003eFactory bolt-in design\u003c\/li\u003e\n\u003cli\u003eModular design compatible with OEM components\u003c\/li\u003e\n\u003cli\u003eDeveloped for a balance of low end and top end power\u003c\/li\u003e\n\u003cli\u003ePrecision designed for fitment\u003c\/li\u003e\n\u003cli\u003eManufactured in house in the USA\u003c\/li\u003e\n\u003cli\u003ePart number FDLH00061T\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e18 Gauge 304 Stainless Steel with Titan Finish\u003c\/h3\u003e\u003cp\u003eThe headers and connection pipes are fabricated from 18 gauge 304 stainless steel. LTH makes them in house in the USA and says the system is precision designed for fitment on the Coyote-powered Mustang GT.\u003c\/p\u003e\u003cp\u003eThe exterior carries LTH's Titan finish. It gives the headers an even matte look and, according to the manufacturer, adds durability.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eLTH says the stock headers are designed mainly to deaden engine sound, and that this restricts exhaust flow and costs horsepower. The equal length long tube layout is meant to restore flow, and LTH developed the runner design for a balance of low end and top end power rather than favoring one end of the rev range.\u003c\/p\u003e\u003cp\u003eThe connection pipes include high flow metallic catalytic converters, so the system keeps catalytic converters in the exhaust path. Because the design is modular, the headers can be used with OEM exhaust components.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDescribed by the manufacturer as a factory bolt-in design\u003c\/li\u003e\n\u003cli\u003eModular design allows use with OEM exhaust components\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eReplaces factory headers that LTH describes as built mainly for sound suppression at the expense of flow\u003c\/li\u003e\n\u003cli\u003eEqual length long tube runners developed for a balance of low end and top end power\u003c\/li\u003e\n\u003cli\u003eHigh flow metallic catalytic converters come in the connection pipes\u003c\/li\u003e\n\u003cli\u003e18 gauge 304 stainless steel construction with a durable Titan matte finish\u003c\/li\u003e\n\u003cli\u003eFactory bolt-in design that works with OEM components\u003c\/li\u003e\n\u003cli\u003eMade in house in the USA and backed by a lifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2015-2026 Ford Mustang GT\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eEqual length long tube headers\u003c\/li\u003e\n\u003cli\u003eConnection pipes with high flow metallic catalytic converters\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eLifetime warranty from LTH Headers.\u003c\/p\u003e","brand":"LTH Headers","offers":[{"title":"Default Title","offer_id":68304906223801,"sku":"LTH-FDLH00061T","price":2395.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/FDLH00018T-01_521af9da-4730-4198-8dd8-acdcbb68c388.jpg?v=1794430318"},{"product_id":"long-tube-headers-t304ss-2-x-3-equal-length-long-tube-headers-and-connection-pipes-track-only-titan-finish-2024-2026-mustang-gt-fdlh00063t","title":"Long Tube Headers T304SS 2\" x 3\" Equal Length Long Tube Headers and Connection Pipes - Track Only - Titan Finish (2024-2026 Mustang GT) - FDLH00063T","description":"\u003cp\u003eThe LTH Headers equal length long tube header package for the 2024-and-newer 5.0L Coyote Mustang GT replaces the factory exhaust manifolds with a long tube design built from 18 gauge 304 stainless steel. The product is listed as a 2\" x 3\" configuration with 2.00\" primaries, and the package is described as including headers and connection pipes. It is finished in LTH's proprietary Titan matte coating and is designated for track use only.\u003c\/p\u003e\n\u003cp\u003eAccording to LTH, the factory headers on the current S650 Mustang GT are designed mainly to suppress engine sound, and that sound-deadening approach restricts exhaust flow and costs power. These equal length long tubes are LTH's answer for owners who want to recover that lost flow. LTH says the primary design targets a balance of low-end and top-end power. The headers are a factory bolt-in design and are modular, so they can be used with OEM exhaust components. They are manufactured in-house in the USA and backed by LTH's lifetime warranty.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eEqual length long tube header design\u003c\/li\u003e\n\u003cli\u003e2.00\" primary tubes; listed as a 2\" x 3\" configuration\u003c\/li\u003e\n\u003cli\u003e18 gauge 304 stainless steel construction\u003c\/li\u003e\n\u003cli\u003eTitan matte finish for added durability\u003c\/li\u003e\n\u003cli\u003eFactory bolt-in design\u003c\/li\u003e\n\u003cli\u003eModular layout that allows use with OEM exhaust components\u003c\/li\u003e\n\u003cli\u003eDeveloped for a balance of low-end and top-end power\u003c\/li\u003e\n\u003cli\u003ePrecision designed for fitment on the 2024+ 5.0L Coyote Mustang GT\u003c\/li\u003e\n\u003cli\u003eManufactured in-house in the USA\u003c\/li\u003e\n\u003cli\u003eTrack only designation\u003c\/li\u003e\n\u003cli\u003eLifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e18 Gauge 304 Stainless Steel with Titan Finish\u003c\/h3\u003e\u003cp\u003eThe headers are fabricated from 18 gauge 304 stainless steel, and LTH produces them in-house at its own US facility rather than outsourcing manufacturing.\u003c\/p\u003e\u003cp\u003eInstead of a bare or polished surface, the headers receive LTH's exclusive Titan finish. This coating gives the entire assembly a uniform matte appearance, and LTH states that it adds durability.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eLTH's position is that the factory S650 GT headers are built primarily to keep exhaust noise down, and that this design limits flow and costs horsepower. Moving to an equal length long tube layout is intended to restore that flow.\u003c\/p\u003e\u003cp\u003eLTH says the 2.00\" primary sizing was chosen to balance low-end and top-end power, so gains are not concentrated only at the top of the rev range. Because the design is modular, the headers can be paired with OEM components, which lets owners upgrade other parts of the exhaust in stages.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFactory bolt-in design\u003c\/li\u003e\n\u003cli\u003eThe A\/C bolt must be trimmed so the header can sit flush against the cylinder heads\u003c\/li\u003e\n\u003cli\u003eDesignated for track use only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eReplaces the factory headers, which LTH describes as designed for sound suppression at the cost of exhaust flow\u003c\/li\u003e\n\u003cli\u003eEqual length long tube primaries are developed for a balance of low-end and top-end power\u003c\/li\u003e\n\u003cli\u003e18 gauge 304 stainless steel with a durable matte Titan finish\u003c\/li\u003e\n\u003cli\u003eBolts in using factory mounting points, with one noted modification to the A\/C bolt\u003c\/li\u003e\n\u003cli\u003eModular design works with OEM exhaust components\u003c\/li\u003e\n\u003cli\u003eMade in-house in the USA and covered by a lifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2024-2026 Ford Mustang GT\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLong tube headers\u003c\/li\u003e\n\u003cli\u003eConnection pipes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eLifetime warranty from LTH Headers.\u003c\/p\u003e","brand":"LTH Headers","offers":[{"title":"Default Title","offer_id":68304906748089,"sku":"LTH-FDLH00063T","price":2345.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/FDLH00018T-01_70c41683-3ead-43db-b651-20f9f6434473.jpg?v=1794430319"},{"product_id":"long-tube-headers-connection-pipes-track-only-2016-2020-shelby-gt350-fdcp00007t","title":"Long Tube Headers Connection Pipes - Track Only (2016-2020 Shelby GT350) - FDCP00007T","description":"\u003cp\u003eThe LTH Headers Long Tube Headers Connection Pipes (part number FDCP00007T) are the connecting section of a long-tube header system, developed by LTH for the 2016-2020 Shelby GT350. This version is labeled Track Only. LTH builds these pipes in house in the USA and coats them in its proprietary Titan finish.\u003c\/p\u003e\n\u003cp\u003eLTH says factory connection pipes are designed mainly to keep engine sound down, and that this sound deadening costs the engine flow and horsepower. Its replacement pipes are tuned to balance low-end and top-end power. Their modular design lets them work with OEM components, which makes them a good fit for GT350 owners assembling a long-tube setup for track use. LTH backs them with a lifetime warranty.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLong-tube header connection pipes, LTH part number FDCP00007T\u003c\/li\u003e\n\u003cli\u003eDesignated Track Only by the manufacturer\u003c\/li\u003e\n\u003cli\u003eExclusive LTH Titan finish with an even matte appearance and added durability\u003c\/li\u003e\n\u003cli\u003eModular design that allows use with OEM components\u003c\/li\u003e\n\u003cli\u003eDeveloped for a balance of low-end and top-end power\u003c\/li\u003e\n\u003cli\u003ePrecision designed for accurate fitment\u003c\/li\u003e\n\u003cli\u003eManufactured in house in the USA\u003c\/li\u003e\n\u003cli\u003eOffered by the manufacturer in a range of sizes\u003c\/li\u003e\n\u003cli\u003eLifetime manufacturer warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTitan Finish and In-House USA Manufacturing\u003c\/h3\u003e\u003cp\u003eLTH coats these connection pipes in Titan, its own exclusive finish. Titan gives the pipes an even matte look across the whole surface and adds durability compared with an unfinished pipe.\u003c\/p\u003e\u003cp\u003eLTH manufactures the pipes in house in the USA and designs them precisely for accurate fitment. Because the design is modular, the pipes can be used alongside OEM components, so the rest of the exhaust does not have to be replaced to install them.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eLTH states that factory connection pipes are built mainly to suppress engine sound, and that the sound deadening limits flow and horsepower. These pipes are intended to recover that lost flow.\u003c\/p\u003e\u003cp\u003eLTH tuned the design for a balance of low-end and top-end power rather than favoring one end of the rev range. The manufacturer does not publish specific horsepower or torque figures.\u003c\/p\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eReplaces sound-suppressing factory connection pipes that LTH says restrict flow and horsepower\u003c\/li\u003e\n\u003cli\u003eTuned for usable power at both low and high engine speeds\u003c\/li\u003e\n\u003cli\u003eModular design works with OEM components when building a long-tube system\u003c\/li\u003e\n\u003cli\u003eTitan finish adds durability and gives a uniform matte appearance\u003c\/li\u003e\n\u003cli\u003eMade in house in the USA and covered by a lifetime manufacturer warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2016-2020 Ford Mustang GT350\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eLifetime warranty from LTH Headers.\u003c\/p\u003e","brand":"LTH Headers","offers":[{"title":"Default Title","offer_id":68304936337593,"sku":"LTH-FDCP00007T","price":765.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/LTH-GT350-Headers-07-1200x800.png?v=1794430321"},{"product_id":"long-tube-headers-connection-pipes-high-flow-cat-2016-2020-shelby-gt350-fdcp00008t","title":"Long Tube Headers Connection Pipes - High Flow Cat (2016-2020 Shelby GT350) - FDCP00008T","description":"\u003cp\u003eThe LTH Headers High Flow Cat Long Tube Headers Connection Pipes (part number FDCP00008T) are the mid-pipe section that joins a set of LTH long tube headers to the rest of the exhaust on the 2016-2020 Shelby GT350. As the title indicates, this version uses high flow catalytic converters. The pipes have a modular design that lets them work with OEM components, and they are finished in LTH's Titan coating for a matte look and added durability.\u003c\/p\u003e\n\u003cp\u003eLTH developed these connection pipes to balance low-end and top-end power and designed them for precise fitment. They are manufactured in-house in the USA and carry a lifetime warranty from LTH. For GT350 owners running or planning LTH long tube headers, they are the manufacturer's own matched connection piece for the system.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eConnection pipes for LTH long tube headers, part number FDCP00008T\u003c\/li\u003e\n\u003cli\u003eHigh flow catalytic converter configuration, as stated in the product title\u003c\/li\u003e\n\u003cli\u003eTitan finish with full matte coverage and added durability\u003c\/li\u003e\n\u003cli\u003eModular design allows use with OEM components\u003c\/li\u003e\n\u003cli\u003eDeveloped to balance low-end and top-end power\u003c\/li\u003e\n\u003cli\u003ePrecision designed for accurate fitment\u003c\/li\u003e\n\u003cli\u003eOffered by LTH in a range of sizes\u003c\/li\u003e\n\u003cli\u003eManufactured in-house in the USA\u003c\/li\u003e\n\u003cli\u003eLifetime warranty from LTH\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTitan Finish and In-House USA Manufacturing\u003c\/h3\u003e\u003cp\u003eLTH coats these connection pipes in its proprietary Titan finish, which gives the pipes an even matte appearance across the entire surface and is intended to add durability. LTH builds the pipes in its own facility in the USA, and the company states they are precision designed for accurate fitment.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eLTH's position is that factory connection pipes are built mainly to suppress engine sound, and that this sound deadening restricts flow and costs horsepower. These connection pipes are LTH's answer to that restriction. LTH states they are tuned for a balance of low-end and top-end power rather than favoring one end of the rev range.\u003c\/p\u003e\u003cp\u003eBecause the design is modular, the pipes can be used with OEM components. That gives you some flexibility in how you assemble the rest of the exhaust system.\u003c\/p\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThey are LTH's own connection pipes, so they pair directly with LTH long tube headers\u003c\/li\u003e\n\u003cli\u003eThe high flow catalytic converter configuration is called out in the product title\u003c\/li\u003e\n\u003cli\u003eThe modular design lets you keep using OEM components downstream\u003c\/li\u003e\n\u003cli\u003eThey are designed to balance low-end and top-end power\u003c\/li\u003e\n\u003cli\u003eThe Titan finish adds durability and gives a uniform matte appearance\u003c\/li\u003e\n\u003cli\u003eThey are made in-house in the USA and backed by a lifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2016-2020 Ford Mustang GT350\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eLifetime warranty from LTH Headers\u003c\/p\u003e","brand":"LTH Headers","offers":[{"title":"Default Title","offer_id":68304936894649,"sku":"LTH-FDCP00008T","price":925.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/LTH-GT350-Headers-07-1200x800_db454e92-ab22-45c8-8582-ce4e6ed82d88.png?v=1794430321"},{"product_id":"lth-fdlh00036t-1-7-8-stainless-steel-longtube-headers-with-high-flow-metallic-catalytic-converter-connection-pipes-2016-2020-5-2l-shelby-gt350","title":"LTH FDLH00036T 1-7\/8\" Stainless Steel Longtube Headers with High Flow Metallic Catalytic Converter Connection Pipes (2016-2020 5.2L Shelby GT350)","description":"\u003cp\u003eThe LTH Headers FDLH00036T is a set of 1-7\/8 inch stainless steel long tube headers for the 5.2L Voodoo V8 in the Shelby GT350 Mustang. It is paired with connection pipes that carry high flow metallic catalytic converters. LTH developed these headers to replace the factory exhaust manifolds and open up flow from the flat-plane-crank engine. The factory parts are built with sound suppression in mind, which costs the engine some flow and power.\u003c\/p\u003e\n\u003cp\u003eLTH tuned the design for a balance of low-end and top-end power and engineered it for precise fitment on the GT350 platform. A modular layout lets the headers work with OEM exhaust components. The headers are built in-house in the USA, coated in the company's Titan matte finish, and backed by a lifetime warranty. For GT350 owners who want more power and a stronger exhaust note, headers are the logical place to start, since this is where most of the exhaust-side power is found.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLong tube header design with 1-7\/8 inch primary tubes\u003c\/li\u003e\n\u003cli\u003eStainless steel construction\u003c\/li\u003e\n\u003cli\u003eIncludes connection pipes with high flow metallic catalytic converters\u003c\/li\u003e\n\u003cli\u003eLTH exclusive Titan finish: uniform matte appearance with added durability\u003c\/li\u003e\n\u003cli\u003eModular design compatible with OEM exhaust components\u003c\/li\u003e\n\u003cli\u003eDeveloped for a balance of low-end and top-end power\u003c\/li\u003e\n\u003cli\u003ePrecision engineered for accurate fitment\u003c\/li\u003e\n\u003cli\u003eManufactured in-house by LTH in the USA\u003c\/li\u003e\n\u003cli\u003eManufacturer part number FDLH00036T\u003c\/li\u003e\n\u003cli\u003eLifetime manufacturer warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eStainless Steel Construction with Titan Finish\u003c\/h3\u003e\u003cp\u003eLTH builds the FDLH00036T from stainless steel and manufactures it in its own facility in the USA. Because the company controls production in-house, it can hold the precise fitment these headers were designed around.\u003c\/p\u003e\u003cp\u003eThe headers are coated in Titan, a finish exclusive to LTH. It gives the entire part a consistent matte look and makes it more durable. The modular construction allows the headers to connect with factory exhaust components, so you are not forced to replace the rest of the system at the same time.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eThe factory GT350 exhaust manifolds are designed to keep engine noise down, and that restricts flow. Replacing them with long tube headers removes much of that restriction. LTH sized and shaped the 1-7\/8 inch primaries to balance low-end response with top-end power rather than favoring one end of the rev range.\u003c\/p\u003e\u003cp\u003eLTH notes that the power benefit from headers grows when the car is tuned for the added airflow. The headers also bring out more of the 5.2L Voodoo's sound. A cat-back exhaust mainly adds sound, while headers are where the larger power improvement comes from.\u003c\/p\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eReplaces sound-focused factory manifolds that restrict exhaust flow on the 5.2L Voodoo\u003c\/li\u003e\n\u003cli\u003e1-7\/8 inch long tube design tuned for a balance of low-end and top-end power\u003c\/li\u003e\n\u003cli\u003eHigh flow metallic catalytic converter connection pipes included\u003c\/li\u003e\n\u003cli\u003eModular design works with OEM exhaust components\u003c\/li\u003e\n\u003cli\u003eStainless steel with a durable Titan matte finish, made in the USA\u003c\/li\u003e\n\u003cli\u003eCovered by a lifetime manufacturer warranty\u003c\/li\u003e\n\u003cli\u003eDelivers greater benefit when paired with a tune for the increased airflow\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2016-2020 Ford Mustang GT350 (5.2L)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1-7\/8 inch stainless steel long tube headers\u003c\/li\u003e\n\u003cli\u003eConnection pipes with high flow metallic catalytic converters\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eLifetime warranty from LTH Headers.\u003c\/p\u003e","brand":"LTH Headers","offers":[{"title":"Default Title","offer_id":68304937877689,"sku":"LTH-FDLH00036T","price":2395.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/LTH-GT350-Headers-01_aac2262d-3e77-4c47-839e-f80b27adf000.png?v=1794430323"},{"product_id":"long-tube-headers-t304ss-2-x-3-equal-length-long-tube-headers-and-connection-pipes-high-flow-metallic-cat-titan-finish-2024-2026-mustang-gt-fdlh00064t","title":"Long Tube Headers T304SS 2\" x 3\" Equal Length Long Tube Headers and Connection Pipes - High Flow Metallic CAT - Titan Finish (2024-2026 Mustang GT) - FDLH00064T","description":"\u003cp\u003eThe LTH Headers FDLH00064T is an equal length long tube header system for the 2024 and newer Ford Mustang GT with the 5.0L Coyote V8. It uses 2.00 inch primaries and is built from 18 gauge 304 stainless steel. The kit pairs the headers with connection pipes that carry high flow metallic catalytic converters, and every piece is coated in the LTH Titan finish, a matte surface the manufacturer applies for added durability.\u003c\/p\u003e\n\u003cp\u003eAccording to LTH, the factory headers on the current Mustang GT are designed mainly to keep engine noise down, and that sound suppression costs the engine exhaust flow and horsepower. This long tube system replaces them with an equal length design that LTH says is tuned for a balance of low end and top end power. It bolts in using factory mounting points, uses a modular layout that works with OEM components, is manufactured in house in the USA, and carries the LTH lifetime warranty.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eEqual length long tube header design for the 5.0L Coyote V8\u003c\/li\u003e\n\u003cli\u003e2.00 inch primary tubes\u003c\/li\u003e\n\u003cli\u003e18 gauge 304 stainless steel construction\u003c\/li\u003e\n\u003cli\u003eIncludes headers and connection pipes\u003c\/li\u003e\n\u003cli\u003eHigh flow metallic catalytic converters\u003c\/li\u003e\n\u003cli\u003eTitan finish: matte appearance with added durability\u003c\/li\u003e\n\u003cli\u003eFactory bolt-in design\u003c\/li\u003e\n\u003cli\u003eModular construction that allows use with OEM components\u003c\/li\u003e\n\u003cli\u003eDeveloped for a balance of low end and top end power\u003c\/li\u003e\n\u003cli\u003ePrecision designed for accurate fitment\u003c\/li\u003e\n\u003cli\u003eManufactured in house in the USA\u003c\/li\u003e\n\u003cli\u003eLifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e18 Gauge 304 Stainless Steel with Titan Finish\u003c\/h3\u003e\u003cp\u003eLTH builds the primaries, collectors, and connection pipes in this system from 18 gauge 304 stainless steel, and all fabrication happens in house at the company's USA facility. The equal length layout is precision designed so the headers line up with the factory mounting points as a bolt-in replacement.\u003c\/p\u003e\u003cp\u003eInstead of a polished or bare finish, the system is coated in LTH's exclusive Titan finish. It gives every component a uniform matte look, and LTH says it also adds durability. The modular design lets the headers and connection pipes work with OEM components, so the rest of the exhaust does not have to be replaced at the same time.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eLTH says the stock 2024 and newer Mustang GT headers are built mainly to suppress engine sound, and that this restricts flow and costs horsepower. The long tube, equal length primaries in this system are meant to restore that flow. LTH developed the design for a balance of low end and top end power, so the gains are not concentrated only at high rpm.\u003c\/p\u003e\u003cp\u003eThe connection pipes carry high flow metallic catalytic converters, which keep catalytic converters in the exhaust path while supporting the flow of the long tube design.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFactory bolt-in design that uses the stock mounting locations\u003c\/li\u003e\n\u003cli\u003eThe A\/C bolt must be trimmed so the header can sit flush against the cylinder heads\u003c\/li\u003e\n\u003cli\u003eModular design allows the system to connect with OEM exhaust components\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eReplaces factory headers that LTH says are designed mainly for sound suppression at the expense of flow and horsepower\u003c\/li\u003e\n\u003cli\u003eEqual length long tube design developed for a balance of low end and top end power\u003c\/li\u003e\n\u003cli\u003e18 gauge 304 stainless steel construction with a durable matte Titan finish\u003c\/li\u003e\n\u003cli\u003eIncludes high flow metallic catalytic converters in the connection pipes\u003c\/li\u003e\n\u003cli\u003eBolts in at the factory mounting points; the only modification noted is trimming the A\/C bolt\u003c\/li\u003e\n\u003cli\u003eWorks with OEM components thanks to its modular design\u003c\/li\u003e\n\u003cli\u003eMade in house in the USA and backed by a lifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2024-2026 Ford Mustang GT\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eEqual length long tube headers\u003c\/li\u003e\n\u003cli\u003eConnection pipes with high flow metallic catalytic converters\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eLifetime warranty from LTH Headers\u003c\/p\u003e","brand":"LTH Headers","offers":[{"title":"Default Title","offer_id":68304938270905,"sku":"LTH-FDLH00064T","price":2495.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/FDLH00018T-01_61850fa4-254e-4ac3-bffc-c871a2424124.jpg?v=1794430324"},{"product_id":"ultimate-headers-1-7-8-304ss-catted-long-tube-headers-2024-2025-mustang-gt-dark-horse-475071","title":"Ultimate Headers 1-7\/8\" 304SS Catted Long Tube Headers (2024-2025 Mustang GT \/ Dark Horse)  - 475071","description":"\u003cp\u003eThe Ultimate Headers 475071 is a catted long tube header kit built for the S650 Mustang GT and Dark Horse and their Gen 4 Coyote engine. It carries over the features of the company's S550 header kit and adapts them to the newer platform. The headers use 1-7\/8 inch primaries feeding a 3 inch connection pipe and are made from 304 stainless steel.\u003c\/p\u003e\n\u003cp\u003eThis kit suits owners who want a long tube header with a catted layout and solid construction. It uses stainless investment cast flanges intended to clamp tightly and seal without leaks, TIG welded joints, and a bolt-on design. It ships with header bolts, gaskets, and O2 sensor extensions. Ultimate Headers builds the kit in the USA and backs it with a limited lifetime warranty.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLong tube header design configured for the Gen 4 Coyote engine in the S650 platform\u003c\/li\u003e\n\u003cli\u003eCatted configuration\u003c\/li\u003e\n\u003cli\u003ePremium 304 stainless steel construction\u003c\/li\u003e\n\u003cli\u003e1-7\/8 inch primary tubes\u003c\/li\u003e\n\u003cli\u003e3 inch connection pipe\u003c\/li\u003e\n\u003cli\u003eStainless steel investment cast flanges designed for strong clamping force and a leak-free seal\u003c\/li\u003e\n\u003cli\u003eTIG welded construction\u003c\/li\u003e\n\u003cli\u003eBolt-on kit\u003c\/li\u003e\n\u003cli\u003eIncludes header bolts, gaskets, and O2 extensions\u003c\/li\u003e\n\u003cli\u003eMade in USA\u003c\/li\u003e\n\u003cli\u003eLimited lifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e304 Stainless Steel Construction with Investment Cast Flanges\u003c\/h3\u003e\u003cp\u003eUltimate Headers builds the 475071 kit from premium 304 stainless steel. All welds are TIG welded, a process the manufacturer uses to get consistent, high-quality joints throughout the header.\u003c\/p\u003e\u003cp\u003eThe head flanges are stainless investment castings rather than flat plate. Ultimate Headers specifies these flanges to deliver strong clamping force against the cylinder head for a leak-free seal at the port interface. The design is carried over from the company's S550 header kit and reworked for the S650 chassis and Gen 4 Coyote.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eThe long tube layout uses 1-7\/8 inch primaries that merge into a 3 inch connection pipe, sized for the Gen 4 Coyote V8. The kit is catted, so it keeps catalytic converters in the header assembly.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDesigned as a bolt-on kit\u003c\/li\u003e\n\u003cli\u003eHeader bolts, gaskets, and O2 sensor extensions are supplied with the kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eReplaces the factory exhaust manifolds with a long tube design configured for the Gen 4 Coyote in the 2024-2025 Mustang GT and Dark Horse\u003c\/li\u003e\n\u003cli\u003eCatted design keeps catalytic converters in the header system\u003c\/li\u003e\n\u003cli\u003eInvestment cast stainless flanges are designed to clamp firmly and resist exhaust leaks\u003c\/li\u003e\n\u003cli\u003e304 stainless steel and TIG welded construction\u003c\/li\u003e\n\u003cli\u003eShips with the bolts, gaskets, and O2 extensions needed for the header-to-head connection and sensor relocation\u003c\/li\u003e\n\u003cli\u003eMade in USA and covered by a limited lifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2024-2025 Ford Mustang Dark Horse \/ GT\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLong tube headers\u003c\/li\u003e\n\u003cli\u003eHeader bolts\u003c\/li\u003e\n\u003cli\u003eGaskets\u003c\/li\u003e\n\u003cli\u003eO2 extensions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eLimited lifetime warranty from Ultimate Headers\u003c\/p\u003e","brand":"Ultimate Headers","offers":[{"title":"Default Title","offer_id":68304940105913,"sku":"ULH-475071","price":2249.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/s650_catted.jpg?v=1794436049"},{"product_id":"long-tube-headers-2-stainless-steel-longtube-headers-high-flow-ecof-by-gesi-catalytic-converter-2015-2023-mustang-gt-fdlh00027t","title":"Long Tube Headers 2\" Stainless Steel Longtube Headers High Flow ECOf by Gesi Catalytic Converter (2015-2023 Mustang GT) - FDLH00027T","description":"\u003cp\u003eThese LTH long tube headers are 2-inch stainless steel headers for the S550 Mustang GT with the Coyote 5.0L V8. They include integrated high-flow ECOf by GESI catalytic converters. LTH notes that the factory S550 headers are built mainly to keep engine sound down, and that this sound suppression costs the engine airflow and horsepower. A long tube design is meant to recover that lost flow while keeping catalytic converters in the system.\u003c\/p\u003e\n\u003cp\u003eLTH designed these headers for a balance of low-end and top-end power and builds them in-house in the USA. The headers carry LTH's Titan matte finish, and the modular layout lets them work with OEM components. LTH positions headers as the modification that delivers the power on this platform, while cat-back changes mainly affect sound. Gen 2 and Gen 3 Coyote owners who want more power and a more aggressive exhaust note while retaining catalytic converters will find this a practical option.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLong tube header design in stainless steel with a 2-inch size designation\u003c\/li\u003e\n\u003cli\u003eHigh-flow ECOf by GESI catalytic converters included\u003c\/li\u003e\n\u003cli\u003eECOf catalytic converters described by the manufacturer as EPA compliant\u003c\/li\u003e\n\u003cli\u003eManufacturer states the ECOf converters use the highest-yielding washcoat currently available\u003c\/li\u003e\n\u003cli\u003eManufacturer states no tuning is required\u003c\/li\u003e\n\u003cli\u003eTitan finish for an all-over matte appearance and added durability\u003c\/li\u003e\n\u003cli\u003eModular design for compatibility with OEM components\u003c\/li\u003e\n\u003cli\u003eTuned for a balance of low-end and top-end power\u003c\/li\u003e\n\u003cli\u003ePrecision designed for fitment on the S550 platform\u003c\/li\u003e\n\u003cli\u003eManufactured in-house in the USA\u003c\/li\u003e\n\u003cli\u003eOffered by LTH in a range of sizes; this listing is the 2-inch version\u003c\/li\u003e\n\u003cli\u003eLifetime manufacturer warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eStainless Steel Construction with Titan Finish\u003c\/h3\u003e\u003cp\u003eThe headers are built from stainless steel and are manufactured in-house by LTH in the USA. LTH applies its proprietary Titan finish, which gives the headers a uniform matte appearance and adds durability.\u003c\/p\u003e\u003cp\u003eThe modular design allows the headers to be used alongside OEM components, and LTH states the headers are precision designed for proper fitment on the S550 chassis. The included ECOf by GESI catalytic converters use what the manufacturer describes as the highest-yielding washcoat on the market today.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eAccording to LTH, the factory S550 headers are designed mainly to suppress engine sound, and that restriction limits airflow and horsepower. These long tube headers replace that restrictive design and are developed for a balance of low-end and top-end power.\u003c\/p\u003e\u003cp\u003eLTH notes that both the Gen 2 and Gen 3 Coyote 5.0L respond well to headers in sound and power, and that headers are where the real power gains come from on this platform. The manufacturer adds that the power benefit is greatest when the car is tuned to take advantage of the added airflow.\u003c\/p\u003e\u003cp\u003eThe high-flow ECOf by GESI catalytic converters keep emissions control in the system. The manufacturer describes them as EPA compliant.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2018-2020 Mustang GT models require removal of the AC system to fit the 2-inch headers.\u003c\/li\u003e\n\u003cli\u003eLTH recommends reusing the factory gaskets or buying a new set of OEM gaskets, which the manufacturer has found to be superior for this application.\u003c\/li\u003e\n\u003cli\u003eThe manufacturer states no tuning is required, but also notes that power gains are greatest when the car is tuned for the added airflow.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eReplaces factory headers that LTH describes as designed to suppress sound at the expense of airflow and horsepower\u003c\/li\u003e\n\u003cli\u003eKeeps catalytic converters in place with included high-flow ECOf by GESI units\u003c\/li\u003e\n\u003cli\u003eDeveloped for a balance of low-end and top-end power on the Coyote 5.0L\u003c\/li\u003e\n\u003cli\u003eTitan matte finish adds durability over the life of the headers\u003c\/li\u003e\n\u003cli\u003eModular design allows use with OEM components\u003c\/li\u003e\n\u003cli\u003eBuilt in the USA and backed by a lifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2015-2023 Ford Mustang GT\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLong tube headers\u003c\/li\u003e\n\u003cli\u003eHigh-flow ECOf by GESI catalytic converters\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eLifetime warranty from LTH.\u003c\/p\u003e","brand":"LTH Headers","offers":[{"title":"Default Title","offer_id":68304940204217,"sku":"LTH-FDLH00027T","price":2224.13,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/2015-mustanggt-header_03.jpg?v=1794436049"},{"product_id":"lth-fdlh00040t-2-stainless-steel-longtube-headers-with-ecof-high-flow-catalytic-converter-connection-pipes-2016-2020-5-2l-shelby-gt350","title":"LTH FDLH00040T 2\" Stainless Steel Longtube Headers with ECOf™ High Flow Catalytic Converter Connection Pipes (2016-2020 5.2L Shelby GT350)","description":"\u003cp\u003eThe LTH FDLH00040T is a 2 inch stainless steel long tube header system for the 5.2L Voodoo-powered Shelby GT350 Mustang. It is paired with LTH's ECOf high flow catalytic converter connection pipes. LTH Headers builds the system in house in the USA and positions it as a direct alternative to the factory GT350 headers. According to LTH, the factory headers are designed largely to quiet the engine, and that sound suppression costs the engine exhaust flow and horsepower.\u003c\/p\u003e\n\u003cp\u003eThe headers are tuned for a balance of low-end and top-end power, and LTH says they are precision designed for correct fitment. A modular layout lets them work alongside OEM exhaust components. Each set has LTH's Titan matte finish for added durability and is backed by the company's lifetime warranty. For GT350 owners who want more power from the exhaust side, LTH notes that headers are where most of the gains are found, while catback changes mainly affect sound.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2 inch primary long tube header design\u003c\/li\u003e\n\u003cli\u003eStainless steel construction\u003c\/li\u003e\n\u003cli\u003eIncludes ECOf high flow catalytic converter connection pipes\u003c\/li\u003e\n\u003cli\u003eECOf catalytic converters described by LTH as EPA compliant\u003c\/li\u003e\n\u003cli\u003eLTH states the ECOf converters use the highest yielding washcoat currently on the market\u003c\/li\u003e\n\u003cli\u003eExclusive Titan finish provides an all-over matte appearance and added durability\u003c\/li\u003e\n\u003cli\u003eModular design allows use with OEM exhaust components\u003c\/li\u003e\n\u003cli\u003eDeveloped for a balance of low-end and top-end power\u003c\/li\u003e\n\u003cli\u003ePrecision designed for fitment on the 5.2L GT350\u003c\/li\u003e\n\u003cli\u003eManufactured in house in the USA by LTH Headers\u003c\/li\u003e\n\u003cli\u003eBacked by an LTH lifetime warranty\u003c\/li\u003e\n\u003cli\u003eIntended for off-road use only; not legal for California, with no CARB certification claimed or implied\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eStainless Steel Long Tubes with Titan Finish\u003c\/h3\u003e\u003cp\u003eThe FDLH00040T headers are made from stainless steel with 2 inch primaries. LTH manufactures the headers in house at its USA facility.\u003c\/p\u003e\u003cp\u003eEvery set has LTH's proprietary Titan finish. The coating gives the headers a uniform matte look across the entire surface and is meant to add durability beyond bare stainless.\u003c\/p\u003e\u003cp\u003eThe ECOf catalytic converter connection pipes are built around a high flow converter design. LTH states the converters are EPA compliant and that their washcoat is the highest yielding available today.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eLTH says the factory GT350 headers prioritize sound suppression, and that this restricts exhaust flow and limits horsepower. The long tube design is intended to recover that lost flow. LTH developed the primary design to balance low-end response with top-end power rather than favoring one end of the rev range.\u003c\/p\u003e\u003cp\u003eAlong with the power focus, the headers are expected to bring out more of the 5.2L Voodoo's exhaust note. LTH notes that catback modifications mainly add sound, while headers deliver the larger share of the power improvement.\u003c\/p\u003e\u003cp\u003eLTH states that no tuning is required with the ECOf high flow converters. The source also notes that header gains are greatest when the car is tuned to take advantage of the added airflow.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe modular design allows the headers to be used with OEM exhaust components.\u003c\/li\u003e\n\u003cli\u003eLTH states that no tuning is required with the ECOf catalytic converters, though the source also notes that a tune helps realize the full benefit of the added airflow.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eReplaces factory GT350 headers that LTH describes as restrictive because of their sound-suppressing design\u003c\/li\u003e\n\u003cli\u003eLong tube layout aimed at a balance of low-end and top-end power\u003c\/li\u003e\n\u003cli\u003eIncludes high flow ECOf catalytic converter connection pipes rather than requiring separate cat pipes\u003c\/li\u003e\n\u003cli\u003eWorks with OEM exhaust components thanks to its modular design\u003c\/li\u003e\n\u003cli\u003eStainless steel construction with Titan finish for durability\u003c\/li\u003e\n\u003cli\u003eMade in the USA and covered by an LTH lifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2016-2020 Ford Mustang GT350 (5.2L)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2 inch stainless steel long tube headers\u003c\/li\u003e\n\u003cli\u003eECOf high flow catalytic converter connection pipes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eLifetime warranty from LTH Headers\u003c\/p\u003e","brand":"LTH Headers","offers":[{"title":"Default Title","offer_id":68304940728505,"sku":"LTH-FDLH00040T","price":3495.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/LTH-GT350-Headers-01_9dfa715e-6f96-4575-ac67-1890dc3b3ceb.png?v=1794430325"},{"product_id":"kooks-1-3-4-x-1-7-8-x-3-ss-stepped-headers-2015-2021-shelby-gt350-11542300","title":"Kooks 1-3\/4\" x 1-7\/8\" x 3\" SS Stepped Headers (2015-2021 Shelby GT350) - 11542300","description":"\u003cp\u003eThe Kooks 11542300 stepped long tube headers are built to take the place of the factory exhaust manifolds on the Shelby GT350 with the 5.2L Voodoo flat-plane-crank V8. Each header uses a stepped primary design, starting at 1-3\/4 inches and growing to 1-7\/8 inches, before merging into a one-piece collector with a 3-inch ball-and-socket outlet. The whole assembly is fabricated from 304 stainless steel and bolts to the cylinder head using the stock bolt pattern.\u003c\/p\u003e\n\u003cp\u003eThe goal of this kit is to get rid of the flow restriction of the original manifolds. Kooks says the stepped primaries open up exhaust flow in stages to improve torque and horsepower, along with more exhaust sound. The headers are suited to street or strip use and work for naturally aspirated or forced induction GT350 builds. They do not mate to the factory exhaust and are meant to be run with a Kooks X-pipe, so they make the most sense for owners planning a complete Kooks exhaust path from the heads back.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLong tube stepped header design, 1-3\/4 in. x 1-7\/8 in. x 3 in.\u003c\/li\u003e\n\u003cli\u003e304 stainless steel construction\u003c\/li\u003e\n\u003cli\u003eMandrel-bent primaries stepping from 1-3\/4 in. to 1-7\/8 in.\u003c\/li\u003e\n\u003cli\u003eLaser-cut head flanges, 3\/8 in. thick\u003c\/li\u003e\n\u003cli\u003eRound port flange design\u003c\/li\u003e\n\u003cli\u003eMatches the stock bolt pattern\u003c\/li\u003e\n\u003cli\u003eSingle-piece collector ending in a 3 in. ball-and-socket outlet\u003c\/li\u003e\n\u003cli\u003ePrimary tube design based on the engine's firing order\u003c\/li\u003e\n\u003cli\u003eKooks dyno and race tests its header and exhaust systems\u003c\/li\u003e\n\u003cli\u003eManufacturer part number 11542300\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e304 Stainless Steel Long Tube Construction\u003c\/h3\u003e\u003cp\u003eKooks builds these headers from 304 stainless steel. The company says it chooses high-grade stainless for long service life and durability. The head flanges are laser cut from 3\/8-inch-thick material and use a round port shape with the factory bolt pattern. The primaries are mandrel bent to keep their 1-3\/4-inch and 1-7\/8-inch diameters through each bend.\u003c\/p\u003e\u003cp\u003eEach primary bank feeds a one-piece collector, and the collector ends in a 3-inch ball-and-socket outlet for the connection to the downstream pipe. Kooks designs every header and exhaust system for a specific application and lays out the tubes around the engine's firing order. Kooks makes its products in a 45,000-square-foot facility in Statesville, North Carolina. The company has more than 50 years of header and exhaust experience, supports racing from oval track to drag racing, and is an official NASCAR contingency partner.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eThe stepped primaries widen from 1-3\/4 inches to 1-7\/8 inches along their length, and Kooks says this increases exhaust flow in stages to improve torque and horsepower. Swapping the factory manifolds for these long tubes removes a restriction in the exhaust path, and Kooks states this brings more flow, more power, and more sound.\u003c\/p\u003e\u003cp\u003eKooks positions this kit for both street and strip use. It is intended for naturally aspirated GT350 builds as well as cars running forced induction.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDirect replacement for the factory GT350 exhaust manifolds, using the stock bolt pattern\u003c\/li\u003e\n\u003cli\u003eThe headers do not connect to the OEM exhaust\u003c\/li\u003e\n\u003cli\u003eA Kooks X-pipe is required to complete the installation\u003c\/li\u003e\n\u003cli\u003eThe two included oxygen sensor harness extensions are required for installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eReplaces the restrictive factory manifolds with long tube headers designed for more exhaust flow\u003c\/li\u003e\n\u003cli\u003eStepped 1-3\/4 in. to 1-7\/8 in. primaries are intended to improve both torque and horsepower\u003c\/li\u003e\n\u003cli\u003e304 stainless steel and 3\/8 in. laser-cut flanges are meant for long-term durability\u003c\/li\u003e\n\u003cli\u003eWorks on naturally aspirated builds and forced induction setups, on the street or at the track\u003c\/li\u003e\n\u003cli\u003eComes with the gaskets, header and outlet hardware, and the oxygen sensor extensions needed to install it\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2015-2020 Ford Mustang GT350 (5.2L)\u003c\/li\u003e\n\u003cli\u003e2015-2020 Ford Mustang GT350 (5.2L)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeader gasket set (part number 755989)\u003c\/li\u003e\n\u003cli\u003eHeader bolt kit (part number BK101)\u003c\/li\u003e\n\u003cli\u003eBall-and-socket outlet bolt kit (part number BK107)\u003c\/li\u003e\n\u003cli\u003eOxygen sensor harness extensions, quantity two (part number CAS-105979)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot included:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eKooks X-pipe (required for installation; these headers do not connect to the factory exhaust)\u003c\/li\u003e\u003c\/ul\u003e","brand":"Kooks","offers":[{"title":"Default Title","offer_id":68304940826809,"sku":"KOO-11542300","price":2229.87,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/77b3c45a388e37185d7bce72312ae441_7d38f1da-2648-4738-a700-c59da67aeef8.jpg?v=1794376273"},{"product_id":"bbk-1-3-4-long-tube-headers-ceramic-2011-2017-mustang-v6-16420","title":"BBK 1-3\/4 Long Tube Headers- (Ceramic) (2011-2017 Mustang V6) - 16420","description":"\u003cp\u003eBBK Performance Parts 16420 is a set of full-length long tube headers for the 2011-2017 Ford Mustang with the 3.7L V6. BBK's research and development team engineered them to extract more horsepower and torque from the V6. They use 1-3\/4 inch CNC mandrel-bent primary tubes and solid 3\/8 inch laser-cut flanges, and the product title designates a ceramic finish.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer-stated gains:\u003c\/strong\u003e In BBK's initial testing on a 6-speed manual transmission V6 Mustang, these headers showed gains of around 10+ horsepower and 5 ft-lbs of torque when paired with a high flow catted X pipe.\u003c\/p\u003e\n\u003cp\u003eThese headers suit V6 owners who want to go beyond what a cat-back or axle-back system can deliver. BBK's initial testing showed measurable gains in both horsepower and torque. The headers are designed to pair with BBK's short mid X pipes for 2011-2014 cars or short mid H pipes for 2015-2017 cars, which together form a complete header-back upgrade.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFull-length long tube header design for the 2011-2017 Mustang 3.7L V6\u003c\/li\u003e\n\u003cli\u003e1-3\/4 inch CNC mandrel-bent primary tubing\u003c\/li\u003e\n\u003cli\u003eSolid 3\/8 inch laser-cut exhaust flanges\u003c\/li\u003e\n\u003cli\u003eCeramic finish, as designated in the product title\u003c\/li\u003e\n\u003cli\u003eDeveloped by BBK's R\u0026amp;D department to increase horsepower and torque\u003c\/li\u003e\n\u003cli\u003ePairs with BBK short mid X pipes (2011-2014) or short mid H pipes (2015-2017), sold separately\u003c\/li\u003e\n\u003cli\u003eSupplied with new gaskets, required hardware, and detailed installation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCNC Mandrel-Bent Tubing and 3\/8 Inch Laser-Cut Flanges\u003c\/h3\u003e\u003cp\u003eBBK forms the 1-3\/4 inch primary tubes on CNC mandrel-bending equipment. Mandrel bending keeps the tube diameter consistent through each bend, so the exhaust path is not pinched where the tubing changes direction. CNC control also keeps the bends repeatable from one header to the next.\u003c\/p\u003e\u003cp\u003eThe headers bolt to the cylinder heads through solid 3\/8 inch laser-cut flanges. Laser cutting produces precise port openings and bolt-hole locations, and the 3\/8 inch thickness gives the flanges a rigid mounting surface for the supplied gaskets. BBK describes the overall design as rugged. The product title lists the headers as the ceramic version.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eThe long tube layout replaces the restrictive factory exhaust manifolds with full-length primaries. BBK's testing on a 6-speed manual V6 Mustang recorded roughly 10+ horsepower and 5 ft-lbs of torque when the headers were run with a high flow catted X pipe.\u003c\/p\u003e\u003cp\u003eLong tube headers move the catalytic converters and oxygen sensors farther back in the exhaust system. As a result, the converters take longer to reach operating temperature. BBK notes that this can trigger a check engine light on some vehicles because the factory computer monitors converter temperature. According to BBK, the light does not indicate a physical problem with the headers, converters, or O2 sensors, does not affect drivability, and can be eliminated with a tune.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eA BBK short mid pipe is required to complete the installation, and it is sold separately.\u003c\/li\u003e\n\u003cli\u003e2011-2014 models: Part 1461, a 2-3\/4 inch short mid X pipe with converters, or Part 1462, a 2-3\/4 inch short mid X pipe for off-road use.\u003c\/li\u003e\n\u003cli\u003e2015-2017 models: Part 1465, a 2-1\/2 inch short mid H pipe with converters, or Part 14650, a 2-1\/2 inch short mid H pipe for off-road use.\u003c\/li\u003e\n\u003cli\u003eAll 2015-2017 Mustang V6 installations require front O2 wire harness extensions, Part 1119, which are purchased separately.\u003c\/li\u003e\n\u003cli\u003eDetailed installation instructions, new gaskets, and the required hardware come with the headers.\u003c\/li\u003e\n\u003cli\u003eA check engine light may appear after installing long tube headers and high flow mid pipes, and BBK states that a vehicle tune can eliminate it.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eReplaces the factory exhaust manifolds with a full-length long tube design aimed at increasing horsepower and torque on the 3.7L V6.\u003c\/li\u003e\n\u003cli\u003eBBK's own testing showed around 10+ horsepower and 5 ft-lbs of torque with a high flow catted X pipe.\u003c\/li\u003e\n\u003cli\u003eMandrel-bent 1-3\/4 inch tubing and 3\/8 inch laser-cut flanges provide a consistent flow path and a solid sealing surface.\u003c\/li\u003e\n\u003cli\u003eMatching BBK short mid X and H pipes are available for both the 2011-2014 and 2015-2017 chassis, so the system can be completed with compatible parts.\u003c\/li\u003e\n\u003cli\u003eGaskets, hardware, and instructions are included, which simplifies parts gathering for a DIY install.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2011-2017 Ford Mustang V6 (3.7L)\u003c\/li\u003e\n\u003cli\u003e2015-2017 Ford Mustang V6\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLong tube headers\u003c\/li\u003e\n\u003cli\u003eNew gaskets\u003c\/li\u003e\n\u003cli\u003eRequired installation hardware\u003c\/li\u003e\n\u003cli\u003eDetailed installation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot included:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFront O2 wire harness extensions, Part 1119 (required for all 2015-2017 Mustang V6 installations)\u003c\/li\u003e\n\u003cli\u003eShort mid X pipe (Part 1461 or 1462 for 2011-2014) or short mid H pipe (Part 1465 or 14650 for 2015-2017), required to complete installation\u003c\/li\u003e\n\u003cli\u003eVehicle tune (may be needed to eliminate a check engine light)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BBK Performance Parts","offers":[{"title":"Default Title","offer_id":68304941056185,"sku":"BBK-16420","price":699.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/16420_v1_2.jpg?v=1794430550"},{"product_id":"lth-fdlh00030t-1-5-8-stainless-steel-longtube-headers-with-high-flow-metallic-catalytic-converter-connection-pipes-2016-2020-5-2l-shelby-gt350","title":"LTH FDLH00030T 1-5\/8\" Stainless Steel Longtube Headers with High Flow Metallic Catalytic Converter Connection Pipes (2016-2020 5.2L Shelby GT350)","description":"\u003cp\u003eThe LTH Headers FDLH00030T is a set of 1-5\/8 in. stainless steel long tube headers paired with high flow metallic catalytic converter connection pipes, engineered for the 5.2L Voodoo V8 in the Shelby GT350. According to LTH, the factory headers on this car are built largely around keeping engine noise down, and that sound-suppressing design comes at the cost of exhaust flow and power. This long tube system replaces the stock units to open up flow on the exhaust side, with the primary tube design tuned by LTH to balance low-end and top-end output.\u003c\/p\u003e\n\u003cp\u003eLTH manufactures these headers in house in the USA and coats them in its proprietary Titan finish, a matte surface treatment intended to add durability. The modular layout lets the system work alongside factory exhaust components, so owners can install headers without being forced to replace the rest of the exhaust at the same time. For 2016-2020 GT350 owners looking for a meaningful power-focused exhaust upgrade, LTH positions headers as the part of the system where the real gains are, with a catback mainly adding sound. The system is backed by LTH's lifetime warranty and is sold for off-road use only.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePart number FDLH00030T\u003c\/li\u003e\n\u003cli\u003e1-5\/8 in. primary long tube header design\u003c\/li\u003e\n\u003cli\u003eStainless steel construction\u003c\/li\u003e\n\u003cli\u003eIncludes high flow metallic catalytic converter connection pipes\u003c\/li\u003e\n\u003cli\u003eLTH-exclusive Titan finish with an all-over matte appearance and added durability\u003c\/li\u003e\n\u003cli\u003eModular design compatible with OEM exhaust components\u003c\/li\u003e\n\u003cli\u003eDeveloped to balance low-end and top-end power\u003c\/li\u003e\n\u003cli\u003ePrecision designed for accurate fitment\u003c\/li\u003e\n\u003cli\u003eManufactured in house by LTH in the USA\u003c\/li\u003e\n\u003cli\u003eLifetime warranty from LTH\u003c\/li\u003e\n\u003cli\u003eIntended for off-road use only; not legal for California and has not been certified by CARB\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eStainless Steel Construction with Titan Finish\u003c\/h3\u003e\u003cp\u003eThe FDLH00030T headers are built from stainless steel with 1-5\/8 in. primaries and are produced in LTH's own USA facility, giving the company direct control over fabrication. LTH states the headers are precision designed for proper fitment on the GT350.\u003c\/p\u003e\u003cp\u003eEach set is coated in LTH's Titan finish, a proprietary treatment that gives the headers a uniform matte look while adding durability. The modular construction allows the headers to connect to factory components, which gives owners flexibility in how they build out the rest of their exhaust.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eLTH notes that the factory GT350 headers are designed with sound suppression as a priority, which limits flow and power. Replacing them with long tube headers is intended to restore that lost flow, and LTH describes headers as one of the most effective power modifications on this platform, more so than catback changes, which mainly affect sound.\u003c\/p\u003e\u003cp\u003eThe header design targets a balance between low-end and top-end power rather than favoring one end of the rev range. LTH also points out that the added airflow is best taken advantage of when the car is tuned to match, so a calibration is worth planning for alongside this upgrade.\u003c\/p\u003e\u003cp\u003eBeyond power, long tube headers bring out more of the distinctive sound of the 5.2L Voodoo V8, complementing the engine's character.\u003c\/p\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eReplaces factory GT350 headers that LTH describes as restrictive due to their sound-suppressing design\u003c\/li\u003e\n\u003cli\u003eLong tube layout with 1-5\/8 in. primaries developed to balance low-end and top-end power\u003c\/li\u003e\n\u003cli\u003eHigh flow metallic catalytic converter connection pipes are part of the system\u003c\/li\u003e\n\u003cli\u003eModular design works with OEM components, allowing a staged exhaust build\u003c\/li\u003e\n\u003cli\u003eTitan matte finish adds durability\u003c\/li\u003e\n\u003cli\u003eMade in house in the USA and covered by a lifetime warranty\u003c\/li\u003e\n\u003cli\u003ePairs well with a tune calibrated for the increased airflow\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2016-2020 Ford Mustang GT350 (5.2L)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1-5\/8 in. stainless steel long tube headers\u003c\/li\u003e\n\u003cli\u003eHigh flow metallic catalytic converter connection pipes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eLifetime warranty from LTH Headers.\u003c\/p\u003e","brand":"LTH Headers","offers":[{"title":"Default Title","offer_id":68305044504761,"sku":"LTH-FDLH00030T","price":1906.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/lth-gt350-headers-01-1024x615_1_4_1.png?v=1794436052"},{"product_id":"kooks-2-ss-headers-and-h-o-green-catted-and-competition-connection-street-strip-kit-2015-2026-mustang-gt-5-0l-2026-dark-horse-1151h6ss","title":"Kooks 2\" SS Headers \u0026 H.O. GREEN Catted \u0026 Competition Connection Street \/ Strip Kit (2015-2026 Mustang GT 5.0L \/ 2026+ Dark Horse) - 1151H6SS","description":"\u003cp\u003eThe Kooks 1151H6SS Street \/ Strip Kit combines 2 inch stainless steel headers with Kooks High Output GREEN catalytic converters and the connecting hardware needed to tie them into the rest of the exhaust. Primaries are mandrel bent from 304 stainless steel, the flanges are laser cut 3\/8 inch plate, and the 3 inch collectors use Kooks' patented scavenging spike. The kit is built for the Coyote 5.0L V8 found in the S550 and S650 Mustang GT, and the manufacturer also lists the 2026 and newer Dark Horse in the product title.\u003c\/p\u003e\n\u003cp\u003eThis package suits Mustang owners who want a header upgrade that keeps catalytic converters in the system. The GREEN cats are EPA verified, 300 cell high flow units that Kooks engineered for modern muscle cars producing more than 750 RWHP, giving room to grow as the build advances. Kooks states that the kit ships with the hardware needed for installation and that nothing else has to be purchased, and every part is handcrafted in the USA and covered by a Limited Lifetime Warranty for the original purchaser.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e304 stainless steel construction (Kooks specifies T304 aircraft quality stainless steel)\u003c\/li\u003e\n\u003cli\u003e2 inch mandrel bent primary tubes\u003c\/li\u003e\n\u003cli\u003e3\/8 inch thick laser cut header flanges\u003c\/li\u003e\n\u003cli\u003eDual bolt pattern header flange\u003c\/li\u003e\n\u003cli\u003e3 inch collectors featuring Kooks' patented scavenging spike\u003c\/li\u003e\n\u003cli\u003eKooks High Output GREEN catalytic converters, EPA verified, 300 cell high flow design\u003c\/li\u003e\n\u003cli\u003eGREEN cats engineered for modern muscle cars making more than 750 RWHP\u003c\/li\u003e\n\u003cli\u003eStreet \/ Strip kit configuration with catted connection\u003c\/li\u003e\n\u003cli\u003eOxygen sensor extension harness supplied with the kit\u003c\/li\u003e\n\u003cli\u003eHandcrafted in the USA\u003c\/li\u003e\n\u003cli\u003eDyno and race tested by Kooks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eT304 Stainless Steel, Handcrafted in the USA\u003c\/h3\u003e\u003cp\u003eKooks fabricates these headers from T304 aircraft quality stainless steel, an alloy chosen for its corrosion resistance and ability to handle the heat cycling an exhaust system sees. The primaries are mandrel bent, which keeps the tube diameter consistent through each bend rather than crushing it the way compression bending can.\u003c\/p\u003e\u003cp\u003eThe header flanges are laser cut from 3\/8 inch thick material, providing a rigid, flat sealing surface at the cylinder head. A dual bolt pattern is machined into the flange. Each part is handcrafted in the USA by Kooks, a family-run, independently owned company that has been building headers and exhaust systems since 1962 and has competed across NHRA, IHRA, NMCA, NMRA, NASCAR, NASA, SCCA, and other sanctioning bodies.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eEach bank feeds through 2 inch primaries into a 3 inch collector equipped with Kooks' patented scavenging spike. Kooks states that its products are dyno and race tested and designed with maximum power in mind.\u003c\/p\u003e\u003cp\u003eDownstream of the headers, the Kooks High Output GREEN cats use a 300 cell high flow substrate and are EPA verified. Kooks engineered these converters specifically for modern muscle cars making more than 750 RWHP, so the converters are intended to keep up with heavily modified combinations rather than becoming a restriction as power climbs.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAccording to Kooks, the kit contains the hardware required for installation and no further parts need to be purchased.\u003c\/li\u003e\n\u003cli\u003eAn oxygen sensor extension harness is supplied to accommodate the relocated sensor positions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eReplaces the factory exhaust manifolds with 2 inch mandrel bent stainless primaries and 3 inch scavenging-spike collectors.\u003c\/li\u003e\n\u003cli\u003eRetains catalytic converters through EPA verified, 300 cell high flow GREEN cats.\u003c\/li\u003e\n\u003cli\u003eConverters are engineered for builds exceeding 750 RWHP, supporting future power upgrades.\u003c\/li\u003e\n\u003cli\u003eGaskets, clamps, bolts, and an O2 sensor extension harness come in the box, so no extra hardware has to be sourced.\u003c\/li\u003e\n\u003cli\u003eT304 stainless steel and 3\/8 inch laser cut flanges for long-term durability and a solid seal.\u003c\/li\u003e\n\u003cli\u003eHandcrafted in the USA and covered by a Limited Lifetime Warranty to the original purchaser.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2015-2026 Ford Mustang GT (5.0L)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2 inch 304 stainless steel headers with 3 inch collectors\u003c\/li\u003e\n\u003cli\u003eKooks High Output GREEN catalytic converters with connection\u003c\/li\u003e\n\u003cli\u003eGaskets\u003c\/li\u003e\n\u003cli\u003eOxygen sensor extension harness\u003c\/li\u003e\n\u003cli\u003eClamps\u003c\/li\u003e\n\u003cli\u003eBolt kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eKooks Limited Lifetime Warranty to the original purchaser.\u003c\/p\u003e","brand":"Kooks","offers":[{"title":"Default Title","offer_id":68305044865209,"sku":"KOO-1151H6SS","price":3428.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/74eb7dc2fd732b98b5692cb844efe957_54ce6549-693c-4b51-be8f-3834ff148e3d.png?v=1794376848"},{"product_id":"long-tube-headers-connection-pipes-ecof-by-gesi-2016-2020-shelby-gt350-fdcp00009t","title":"Long Tube Headers Connection Pipes - ECOf by GESI (2016-2020 Shelby GT350) - FDCP00009T","description":"\u003cp\u003eThis is a set of connection pipes from LTH Headers, identified in the product title as ECOf by GESI, part number FDCP00009T. They are listed for the 2016-2020 Shelby GT350 and connect a long tube header system to the rest of the exhaust. LTH describes the pipes as developed for a balance of low-end and top-end power, with a modular layout that allows them to be used with OEM components.\u003c\/p\u003e\n\u003cp\u003eThe pipes carry LTH's Titan finish, a matte coating the manufacturer says adds durability. LTH states that the parts are precision designed for fitment and made in-house in the USA, and the company backs them with a lifetime warranty. For GT350 owners building around long tube headers, these pipes are LTH's matching link between the headers and the downstream exhaust.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eConnection pipes for use with LTH long tube headers\u003c\/li\u003e\n\u003cli\u003eIdentified in the product title as ECOf by GESI\u003c\/li\u003e\n\u003cli\u003ePart number FDCP00009T\u003c\/li\u003e\n\u003cli\u003eTitan finish with full matte appearance for added durability\u003c\/li\u003e\n\u003cli\u003eModular design that allows use with OEM components\u003c\/li\u003e\n\u003cli\u003eDeveloped for a balance of low-end and top-end power\u003c\/li\u003e\n\u003cli\u003ePrecision designed for fitment\u003c\/li\u003e\n\u003cli\u003eManufactured in-house in the USA by LTH\u003c\/li\u003e\n\u003cli\u003eLifetime manufacturer warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTitan Finish and In-House USA Manufacturing\u003c\/h3\u003e\u003cp\u003eLTH coats these connection pipes in its Titan finish. The coating gives the pipes a uniform matte look, and the manufacturer says it adds durability.\u003c\/p\u003e\u003cp\u003eLTH builds the pipes in its own USA facility and states that they are precision designed for fitment. The modular design lets the pipes work alongside OEM components, so they can fit into a system that keeps some factory parts.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eLTH says it developed these connection pipes to balance low-end and top-end power rather than favor one end of the rev range. The manufacturer does not publish specific horsepower, torque, or flow figures for this part.\u003c\/p\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eConnects a long tube header setup to the rest of the exhaust on a 2016-2020 Shelby GT350\u003c\/li\u003e\n\u003cli\u003eModular design allows use with OEM components, which adds flexibility when planning the build\u003c\/li\u003e\n\u003cli\u003eTuned by LTH for a balance of low-end and top-end power\u003c\/li\u003e\n\u003cli\u003eTitan matte finish adds durability, according to the manufacturer\u003c\/li\u003e\n\u003cli\u003eMade in-house in the USA and covered by a lifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2016-2020 Ford Mustang GT350\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eLifetime warranty from LTH Headers\u003c\/p\u003e","brand":"LTH Headers","offers":[{"title":"Default Title","offer_id":68305045749945,"sku":"LTH-FDCP00009T","price":1925.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/LTH-GT350-Headers-07-1200x800_a5043329-aad0-4dca-af6b-09229e91ade2.png?v=1794430328"},{"product_id":"lth-fdlh00039t-2-stainless-steel-longtube-headers-with-high-flow-metallic-catalytic-converter-connection-pipes-2016-2020-5-2l-shelby-gt350","title":"LTH FDLH00039T 2\" Stainless Steel Longtube Headers with High Flow Metallic Catalytic Converter Connection Pipes (2016-2020 5.2L Shelby GT350)","description":"\u003cp\u003eThe LTH Headers FDLH00039T is a 2-inch stainless steel long tube header system for the 2016-2020 Shelby GT350 and its 5.2L Voodoo V8. It pairs the long tube headers with connection pipes that carry high flow metallic catalytic converters. LTH builds the headers in house in the USA and finishes them in the company's proprietary Titan coating.\u003c\/p\u003e\n\u003cp\u003eLTH says the factory GT350 headers are designed mainly to keep exhaust sound down, and that this approach limits flow and power. This system replaces them with long tube headers tuned for a balance of low-end and top-end output. Its modular layout lets it work with OEM components, and LTH says it is precision designed for proper fitment. It is a practical choice for GT350 owners who want to address the header section of the exhaust, where LTH says the larger power gains are found compared with cat-back changes.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLong tube header design for the 2016-2020 Shelby GT350 5.2L\u003c\/li\u003e\n\u003cli\u003e2-inch stainless steel construction\u003c\/li\u003e\n\u003cli\u003eHigh flow metallic catalytic converter connection pipes\u003c\/li\u003e\n\u003cli\u003eLTH's exclusive Titan finish with an all-over matte appearance and added durability\u003c\/li\u003e\n\u003cli\u003eModular design that allows use with OEM components\u003c\/li\u003e\n\u003cli\u003eDeveloped for a balance of low-end and top-end power\u003c\/li\u003e\n\u003cli\u003ePrecision designed for fitment\u003c\/li\u003e\n\u003cli\u003eManufactured in house in the USA\u003c\/li\u003e\n\u003cli\u003eOffered by LTH in a range of sizes; this part number is the 2-inch version\u003c\/li\u003e\n\u003cli\u003eLifetime warranty from LTH\u003c\/li\u003e\n\u003cli\u003eNot California exhaust compliant, no implied CARB certification, for off-road use only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eStainless Steel Construction with Titan Finish\u003c\/h3\u003e\u003cp\u003eThe FDLH00039T headers are built from stainless steel and fabricated in house by LTH in the USA. LTH describes the design as precision engineered for proper fitment on the GT350 platform.\u003c\/p\u003e\u003cp\u003eThe headers carry LTH's exclusive Titan finish. It gives the system a uniform matte look and, according to LTH, adds durability. The modular construction allows the headers to work with OEM components rather than requiring a fully proprietary exhaust layout.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eLTH tuned this header design for a balance of low-end and top-end power rather than favoring one end of the rev range. The manufacturer says the factory headers sacrifice flow to suppress sound, and the long tube layout is intended to recover that lost flow.\u003c\/p\u003e\u003cp\u003eLTH notes that headers free up more power when the car has a tune that accounts for the added airflow. The manufacturer also says that cat-back changes mainly affect sound, while the headers are where most of the power is found. Headers also change the exhaust note of the 5.2L Voodoo.\u003c\/p\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eReplaces factory headers that LTH says are designed mainly to reduce sound at the expense of flow\u003c\/li\u003e\n\u003cli\u003eLong tube design developed for balanced low-end and top-end power\u003c\/li\u003e\n\u003cli\u003eConnection pipes with high flow metallic catalytic converters are part of the system\u003c\/li\u003e\n\u003cli\u003eModular design works with OEM components\u003c\/li\u003e\n\u003cli\u003eStainless steel with a durable matte Titan finish\u003c\/li\u003e\n\u003cli\u003eMade in the USA by LTH and backed by a lifetime warranty\u003c\/li\u003e\n\u003cli\u003ePairs well with a tune to take advantage of the added airflow\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2016-2020 Ford Mustang GT350 (5.2L)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLong tube headers (2-inch)\u003c\/li\u003e\n\u003cli\u003eHigh flow metallic catalytic converter connection pipes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eLifetime warranty from LTH Headers.\u003c\/p\u003e","brand":"LTH Headers","offers":[{"title":"Default Title","offer_id":68305045979321,"sku":"LTH-FDLH00039T","price":2495.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/LTH-GT350-Headers-01_56713077-1e64-4bb3-a50d-e19398faa5a0.png?v=1794430329"},{"product_id":"american-racing-headers-1-7-8-x-3-longtube-headers-with-offroad-connection-pipes-direct-connection-for-corsa-catback-systems-2018-2023-mustang-gt","title":"American Racing Headers 1-7\/8\" x 3\" Longtube Headers with Offroad Connection Pipes - Direct Connection for CORSA Catback Systems (2018-2023 Mustang GT)","description":"\u003cp\u003eAmerican Racing Headers builds this long-tube header package for the 5.0L Coyote-powered Mustang GT, pairing 1-7\/8 in. primaries with a 3 in. exhaust and a set of off-road connection pipes. It is part of the company's Direct Connect Kit approach: the connection pipes are designed specifically to mate with CORSA cat-back systems, so the headers tie into an existing or planned CORSA cat-back without welding.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer-stated gains:\u003c\/strong\u003e American Racing Headers states gains of up to 30 rear-wheel horsepower for its Direct Connect Kit. The manufacturer does not specify the test vehicle, supporting modifications, tuning, or which header primary size (1-3\/4 in., 1-7\/8 in., or 2 in.) produced that figure.\u003c\/p\u003e\n\u003cp\u003eThe goal is to replace a restrictive factory exhaust manifold setup with mandrel-bent T304 stainless steel tubing that frees up power and torque the Coyote V8 already has on tap. For Mustang GT owners who have chosen, or plan to choose, a CORSA cat-back, this kit provides a matched header-to-cat-back path from a manufacturer that builds its products in the USA.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1-7\/8 in. long-tube primaries with a 3 in. exhaust\u003c\/li\u003e\n\u003cli\u003eOff-road connection pipes included in the system\u003c\/li\u003e\n\u003cli\u003eDirect Connect design made to work exclusively with CORSA cat-back systems\u003c\/li\u003e\n\u003cli\u003eNo welding required when connecting to a CORSA cat-back\u003c\/li\u003e\n\u003cli\u003eT304 stainless steel piping\u003c\/li\u003e\n\u003cli\u003eMandrel-bent tubing\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003eDesigned for the 2018 and newer Mustang GT 5.0L\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMandrel-Bent T304 Stainless Steel Construction\u003c\/h3\u003e\u003cp\u003eThe piping is T304 stainless steel, a common choice for header and exhaust tubing on performance applications. Every bend is mandrel formed, which keeps the tube diameter consistent through the curves instead of crushing or pinching it the way compression bending can.\u003c\/p\u003e\u003cp\u003eAmerican Racing Headers manufactures this system in the USA.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eLong-tube headers with 1-7\/8 in. primaries feeding a 3 in. exhaust are intended to move exhaust out of the Coyote more efficiently than the factory setup. American Racing Headers rates its Direct Connect Kit at up to 30 rear-wheel horsepower.\u003c\/p\u003e\u003cp\u003eThe manufacturer offers this header design in 1-3\/4 in., 1-7\/8 in., and 2 in. primary sizes, with the 2 in. version aimed at max-effort builds. The 1-7\/8 in. size covered by this listing sits in the middle of that range.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDesigned to connect directly to CORSA cat-back systems with no welding required\u003c\/li\u003e\n\u003cli\u003eIntended for use exclusively with CORSA cat-back systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eYou run or plan to run a CORSA cat-back and want headers and connection pipes made to mate with it directly\u003c\/li\u003e\n\u003cli\u003eYou want to replace the restrictive factory exhaust path on your 5.0L Mustang GT with long-tube headers\u003c\/li\u003e\n\u003cli\u003eYou prefer T304 stainless steel, mandrel-bent tubing for your exhaust upgrade\u003c\/li\u003e\n\u003cli\u003eYou want a 1-7\/8 in. primary size rather than the smaller 1-3\/4 in. or the max-effort 2 in. option\u003c\/li\u003e\n\u003cli\u003eYou want to avoid welding when connecting headers to your cat-back\u003c\/li\u003e\n\u003cli\u003eYou prefer parts made in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2018-2026 Ford Mustang GT (5.0L)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1-7\/8 in. x 3 in. long-tube headers\u003c\/li\u003e\n\u003cli\u003eOff-road connection pipes\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"American Racing Headers","offers":[{"title":"No Thanks","offer_id":68305046896825,"sku":"ARH-MTC5-18178300CCNC","price":1947.61,"currency_code":"USD","in_stock":true},{"title":"Yes Please","offer_id":68305046929593,"sku":"ARH-MTC5-18178300CCNC-GESI","price":3042.61,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/Mustang_Corsa_Direct_Connection.png?v=1794430331"},{"product_id":"kooks-3-ss-green-catted-connnection-pipes-2015-2023-mustang-gt-5-0l-11513300","title":"Kooks 3\" SS GREEN Catted Connnection Pipes. 2015-2023 Mustang GT 5.0L. - 11513300","description":"\u003cp\u003eThe Kooks 11513300 is a set of 3-inch stainless steel GREEN catted connection pipes for the 2015-2023 Ford Mustang GT with the 5.0L 4V engine. These pipes sit between the headers and the rest of the exhaust system, and they integrate catalytic converters into that section of the exhaust path.\u003c\/p\u003e\n\u003cp\u003eThe 11513300 is built for owners assembling a complete Kooks exhaust setup. It joins Kooks headers to a Kooks exhaust system and is not designed to mate with the factory OEM exhaust. If you are running or planning Kooks headers and a Kooks exhaust on an S550-platform Mustang GT, this is a catted link between the two in a 3-inch stainless steel package.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eKooks part number 11513300\u003c\/li\u003e\n\u003cli\u003e3-inch diameter connection pipes\u003c\/li\u003e\n\u003cli\u003eStainless steel construction\u003c\/li\u003e\n\u003cli\u003eGREEN catted design with integrated catalytic converters\u003c\/li\u003e\n\u003cli\u003eEngineered for the 2015-2023 Mustang GT 5.0L 4V\u003c\/li\u003e\n\u003cli\u003eConnects Kooks headers to a Kooks exhaust system\u003c\/li\u003e\n\u003cli\u003eDoes not connect to the OEM exhaust\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e3-Inch Stainless Steel Catted Construction\u003c\/h3\u003e\u003cp\u003eKooks builds these connection pipes from stainless steel in a 3-inch diameter, with catalytic converters built into the pipes as part of the GREEN catted design. That means the converters and the connecting tubing come as one Kooks-designed section rather than as separate pieces to be sourced and joined.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDesigned to bolt between Kooks headers and a Kooks exhaust system\u003c\/li\u003e\n\u003cli\u003eWill not connect to the factory OEM exhaust, so a Kooks exhaust is required downstream\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eProvides a catted connection between Kooks headers and a Kooks exhaust on a 2015-2023 Mustang GT 5.0L\u003c\/li\u003e\n\u003cli\u003eUses a 3-inch pipe diameter in stainless steel\u003c\/li\u003e\n\u003cli\u003eKeeps the header-to-exhaust section within the Kooks product line, matched to Kooks components at both ends\u003c\/li\u003e\n\u003cli\u003eIntegrates catalytic converters into the connection pipes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2015-2023 Ford Mustang GT (5.0L)\u003c\/li\u003e\u003c\/ul\u003e","brand":"Kooks","offers":[{"title":"Default Title","offer_id":68305047126201,"sku":"KSH11513300","price":1406.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/a03b888694418c4e7509844b5688ebdd_159de920-2a1f-419b-be8e-d726d67a9eee.jpg?v=1794376864"},{"product_id":"lth-fdlh00037t-1-7-8-stainless-steel-longtube-headers-with-ecof-high-flow-catalytic-converter-connection-pipes-2016-2020-5-2l-shelby-gt350","title":"LTH FDLH00037T 1-7\/8\" Stainless Steel Longtube Headers with ECOf™ High Flow Catalytic Converter Connection Pipes (2016-2020 5.2L Shelby GT350)","description":"\u003cp\u003eThe LTH Headers FDLH00037T is a set of 1-7\/8 in. stainless steel long-tube headers for the 2016-2020 Shelby GT350 with the 5.2L engine. It is paired with LTH's ECOf high-flow catalytic converter connection pipes. LTH explains that the factory GT350 headers are built largely to suppress engine noise, and that this sound-deadening approach restricts exhaust flow and costs horsepower. This long-tube design is meant to recover that flow and bring out more of the 5.2L's voice.\u003c\/p\u003e\n\u003cp\u003eLTH builds these headers in house in the USA and finishes them in its proprietary Titan coating, a matte finish intended to add durability. The tube routing was developed to balance low-end and top-end power. The modular layout lets the headers work with OEM exhaust components. For GT350 owners who want to change more than a cat-back can, the headers are where LTH says the real power gains are found.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1-7\/8 in. primary tube long-tube header design\u003c\/li\u003e\n\u003cli\u003eStainless steel construction\u003c\/li\u003e\n\u003cli\u003eECOf high-flow catalytic converter connection pipes included\u003c\/li\u003e\n\u003cli\u003eECOf catalytic converters described by LTH as EPA compliant and using its highest-yielding washcoat\u003c\/li\u003e\n\u003cli\u003eLTH states no tuning is required for the ECOf catalytic converters\u003c\/li\u003e\n\u003cli\u003eExclusive Titan finish with an all-over matte appearance and added durability\u003c\/li\u003e\n\u003cli\u003eModular design compatible with OEM exhaust components\u003c\/li\u003e\n\u003cli\u003eDeveloped to balance low-end and top-end power\u003c\/li\u003e\n\u003cli\u003ePrecision designed for accurate fitment\u003c\/li\u003e\n\u003cli\u003eManufactured in house by LTH in the USA\u003c\/li\u003e\n\u003cli\u003eLifetime manufacturer warranty\u003c\/li\u003e\n\u003cli\u003eIntended for off-road use only; not legal for California, with no CARB certification implied\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eStainless Steel Long Tubes with Titan Finish\u003c\/h3\u003e\u003cp\u003eThe FDLH00037T headers are fabricated from stainless steel with 1-7\/8 in. primaries. LTH manufactures them at its own facility in the USA and engineers the design for precise fitment on the GT350 chassis.\u003c\/p\u003e\u003cp\u003eEach set carries LTH's exclusive Titan finish. The coating gives the headers a uniform matte look and is intended to improve their durability over time. The connection pipes integrate LTH's ECOf high-flow catalytic converters, which the manufacturer says use the highest-yielding washcoat currently on the market.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eAccording to LTH, the stock GT350 headers are designed primarily to quiet the engine, and that restricts exhaust flow and horsepower. Replacing them with long-tube headers is meant to free up that flow. LTH tuned the design to deliver a balance of low-end and top-end power rather than favoring one end of the rev range.\u003c\/p\u003e\u003cp\u003eLTH also points to sound as a major benefit. The GT350's 5.2L engine already has a distinctive note, and headers let more of it through. The manufacturer notes that cat-back changes mainly add volume, while headers are where the power gains come from. It also says header gains are greatest when the car is tuned to take advantage of the added airflow.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLTH states that no tuning is required for the ECOf catalytic converters.\u003c\/li\u003e\n\u003cli\u003eThe modular design allows the headers to be used with OEM exhaust components.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eReplaces factory headers that LTH says are designed to suppress sound at the expense of exhaust flow and power.\u003c\/li\u003e\n\u003cli\u003eLong-tube layout developed for balanced low-end and top-end power on the 5.2L.\u003c\/li\u003e\n\u003cli\u003eIncludes high-flow ECOf catalytic converter connection pipes, so catalytic converters remain in the system.\u003c\/li\u003e\n\u003cli\u003eTitan matte finish adds durability and gives the headers a clean appearance.\u003c\/li\u003e\n\u003cli\u003eModular design works with OEM exhaust components.\u003c\/li\u003e\n\u003cli\u003eBuilt in the USA and backed by a lifetime warranty from LTH.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2016-2020 Ford Mustang GT350 (5.2L)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1-7\/8 in. stainless steel long-tube headers\u003c\/li\u003e\n\u003cli\u003eECOf high-flow catalytic converter connection pipes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eLTH Headers backs this product with a lifetime warranty.\u003c\/p\u003e","brand":"LTH Headers","offers":[{"title":"Default Title","offer_id":68305048830137,"sku":"LTH-FDLH00037T","price":3395.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/LTH-GT350-Headers-01_f812038a-b9e2-489a-a7d9-9e32b68a3717.png?v=1794430332"},{"product_id":"stainless-power-1-7-8-long-tube-headers-with-3-catted-lead-pipes-factory-connect-2015-2026-mustang-gt-sm24hcat","title":"Stainless Power 1-7\/8\" Long Tube Headers with 3\" Catted Lead Pipes (Factory Connect) (2015-2026 Mustang GT)- SM24HCAT","description":"\u003cp\u003eThe Stainless Power SM24HCAT is a long tube header system for the 2015-2026 Mustang GT that combines 1-7\/8\" primary tubes with 3\" diameter catted lead pipes. Designed by Stainless Works and built to its specifications, the system replaces the factory exhaust manifolds and catalytic converters. The high flow catalytic converters are integrated into the lead pipes, which are built to mate to the factory connection point so the rest of the exhaust can stay in place.\u003c\/p\u003e\n\u003cp\u003eStainless Power is the value-line brand from Stainless Works. It aims to bring the construction details found in higher-end header systems to a lower price point, with each product inspected to the manufacturer's specifications. This kit uses TIG-welded stainless steel, CNC mandrel bends, 3\/8\" thick laser-cut flanges, and 3\" slip fit collectors with merge spikes. For Coyote-powered Mustang GT owners who want long tube headers with catalytic converters and a factory-style connection, it is a complete package that ships with the O2 extensions, clamps, bolts, and RTV silicone needed for installation.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1-7\/8\" diameter primary tubes\u003c\/li\u003e\n\u003cli\u003e3\" diameter lead pipes with integrated high flow catalytic converters\u003c\/li\u003e\n\u003cli\u003eLead pipes mate to the factory connection point (Factory Connect)\u003c\/li\u003e\n\u003cli\u003e304 stainless steel construction\u003c\/li\u003e\n\u003cli\u003eTIG-welded assembly\u003c\/li\u003e\n\u003cli\u003eCNC mandrel bends\u003c\/li\u003e\n\u003cli\u003eExtra thick 3\/8\" laser-cut flanges\u003c\/li\u003e\n\u003cli\u003e3\" diameter slip fit collectors with merge spikes\u003c\/li\u003e\n\u003cli\u003eReplaces the factory exhaust manifolds and catalytic converters\u003c\/li\u003e\n\u003cli\u003eInstall ready with O2 extensions, clamps, bolts, and RTV silicone included\u003c\/li\u003e\n\u003cli\u003eDesigned by Stainless Works and made and inspected to its exact specifications\u003c\/li\u003e\n\u003cli\u003e24-month guarantee on material and workmanship\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTIG-Welded 304 Stainless Steel Construction\u003c\/h3\u003e\u003cp\u003eThe headers are made from 304 stainless steel and TIG-welded. The primaries are formed with CNC mandrel bends, which keep the tube diameter consistent through each bend rather than crimping it.\u003c\/p\u003e\u003cp\u003eAt the cylinder head, the system uses extra thick 3\/8\" laser-cut flanges. At the outlet, the 3\" diameter slip fit collectors include merge spikes where the primary tubes come together. Stainless Works designs the Stainless Power line, and each piece is made and inspected to its exact specifications.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eThe system pairs 1-7\/8\" primaries with 3\" collectors and 3\" lead pipes. Stainless Works says the CNC mandrel bends are intended to maximize flow, and the merge spikes in the collectors guide the exhaust pulses from the individual primaries into the collector.\u003c\/p\u003e\u003cp\u003eHigh flow catalytic converters are built into the 3\" lead pipes, so the system replaces both the factory manifolds and the factory converters in one assembly. Because the lead pipes connect at the factory connection point, the car's existing downstream exhaust can remain in use.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eReplaces the factory exhaust manifolds and catalytic converters\u003c\/li\u003e\n\u003cli\u003eCatted lead pipes mate to the factory connection point, allowing the existing downstream exhaust to be retained\u003c\/li\u003e\n\u003cli\u003eO2 extensions are included\u003c\/li\u003e\n\u003cli\u003eClamps, bolts, and RTV silicone are included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eYou want long tube headers with catalytic converters already built into the lead pipes, rather than sourcing converters separately.\u003c\/li\u003e\n\u003cli\u003eThe factory-connect lead pipes let you upgrade the headers without replacing the rest of your exhaust system.\u003c\/li\u003e\n\u003cli\u003eThe construction details include TIG-welded 304 stainless steel, CNC mandrel bends, 3\/8\" flanges, and merge spike collectors.\u003c\/li\u003e\n\u003cli\u003eThe kit includes O2 extensions, clamps, bolts, and RTV silicone, so you have the main installation hardware on hand.\u003c\/li\u003e\n\u003cli\u003eIt is covered by a 24-month guarantee on material and workmanship.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2015-2026 Ford Mustang GT\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1-7\/8\" long tube headers\u003c\/li\u003e\n\u003cli\u003e3\" catted lead pipes with high flow catalytic converters\u003c\/li\u003e\n\u003cli\u003eO2 extensions\u003c\/li\u003e\n\u003cli\u003eClamps\u003c\/li\u003e\n\u003cli\u003eBolts\u003c\/li\u003e\n\u003cli\u003eRTV silicone\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003e24-month guarantee on material and workmanship from Stainless Works.\u003c\/p\u003e","brand":"Stainless Works","offers":[{"title":"Default Title","offer_id":68305051517113,"sku":"SSWSM24HCAT","price":1519.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/m15hcat-1_1_4.jpg?v=1794436060"}],"url":"https:\/\/engmustangs.com\/collections\/mustang-headers.oembed?page=6","provider":"ENG Mustangs","version":"1.0","type":"link"}