{"title":"Mustang Axle-Back Exhaust","description":null,"products":[{"product_id":"corsa-performance-14317-4-quad-tip-xtreme-axle-back-exhaust-system-with-polished-tips-2011-2014-5-0l-mustang-gt-2013-2014-5-8l-shelby-gt500","title":"Corsa Performance 14317-4 Quad Tip Xtreme Axle Back Exhaust System with Polished Tips (2011-2014 5.0L Mustang GT \/ 2013-2014 5.8L Shelby GT500)","description":"\u003cp\u003eThe CORSA Xtreme Axle-Back Exhaust System brings an aggressive, vehicle-specific sound to the 2011-2014 Mustang GT with the 5.0L engine and the 2013-2014 Shelby GT500 with the 5.8L engine. This kit uses CORSA's quad-tip layout with polished tips.\u003c\/p\u003e\n\u003cp\u003eAs an axle-back, it replaces only the rear section of the exhaust and installs rearward of the factory catalytic converters. That makes it one of the simplest ways to change how these Mustangs sound, while CORSA's straight-through design reduces back pressure.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eXtreme sound level, acoustically engineered for the make, model and harmonics of the vehicle\u003c\/li\u003e\n\u003cli\u003ePatented non-restrictive straight-through design that reduces back pressure\u003c\/li\u003e\n\u003cli\u003eQuad polished tips\u003c\/li\u003e\n\u003cli\u003ePremium 304L stainless steel construction\u003c\/li\u003e\n\u003cli\u003eNo packing materials to break down over time\u003c\/li\u003e\n\u003cli\u003eInstalls rearward of the factory catalytic converters; 50-state emissions legal\u003c\/li\u003e\n\u003cli\u003eIncludes 304 stainless TORCA clamps\u003c\/li\u003e\n\u003cli\u003eHandcrafted in Berea, Ohio, USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e304L Stainless Steel Construction\u003c\/h3\u003e\u003cp\u003eCORSA builds this system from 304L stainless steel and avoids the packing materials that degrade in many conventional mufflers. That combination is what lets CORSA back the system with a limited lifetime warranty.\u003c\/p\u003e\u003cp\u003eThe included clamps are TORCA units, also made from 304 stainless steel, and every system is handcrafted in Berea, Ohio.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eCORSA tunes each system to the personality of the vehicle, so the Xtreme sound level gives the Mustang GT and GT500 a strong, aggressive tone. The patented straight-through design reduces back pressure, which CORSA states frees up additional power.\u003c\/p\u003e\u003cp\u003eAccording to CORSA, lower back pressure and more efficient engine operation can also lead to better fuel economy.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBolt-on axle-back installation\u003c\/li\u003e\n\u003cli\u003eAll necessary hardware and full-color photo instructions included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eGives a 2011-2014 Mustang GT or 2013-2014 Shelby GT500 a deeper, more aggressive exhaust note\u003c\/li\u003e\n\u003cli\u003eStays emissions-legal in all 50 states because it installs behind the catalytic converters\u003c\/li\u003e\n\u003cli\u003eDurable 304L stainless construction with no packing to wear out\u003c\/li\u003e\n\u003cli\u003eBacked by a limited lifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2011-2014 Ford Mustang GT\u003c\/li\u003e\n\u003cli\u003e2013-2014 Ford Mustang GT500 (5.8L)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAxle-back exhaust system with quad polished tips\u003c\/li\u003e\n\u003cli\u003e304 stainless TORCA clamps and hardware\u003c\/li\u003e\n\u003cli\u003eFull-color instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eLimited lifetime warranty from CORSA.\u003c\/p\u003e","brand":"Corsa Performance","offers":[{"title":"Default Title","offer_id":68304222388409,"sku":"COR14317-4","price":1149.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/100507.jpg?v=1794370744"},{"product_id":"borla-axle-back-exhaust-system-s-type-stainless-black-tips-2018-2023-mustang-11953bc","title":"Borla Axle-Back Exhaust System - S-Type - Stainless Black Tips (2018-2023 Mustang) - 11953BC","description":"\u003cp\u003eThe Borla S-Type Axle-Back Exhaust System, part number 11953BC, replaces the factory exhaust from the axle rearward on 2018-2023 Mustang GT models powered by the 5.0L V8. This version is finished with stainless black tips and is built for cars that were not equipped with the factory Active Valve Performance Exhaust. Borla specifies it for both automatic and manual transmission rear-wheel-drive cars in two-door coupe and convertible form.\u003c\/p\u003e\n\u003cp\u003eAn axle-back is a practical way to change the sound and rear-end appearance of an S550 GT without replacing the full exhaust. Borla's S-Type line delivers the brand's signature 'Sound of Power' along with motorsport-inspired styling. Borla is a long-established builder of stainless steel performance exhaust whose work began with systems for classic Rolls-Royce and Ferrari cars and now covers street, off-road, and racing applications.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBorla S-Type axle-back exhaust system, part number 11953BC\u003c\/li\u003e\n\u003cli\u003eStainless tips with a black finish\u003c\/li\u003e\n\u003cli\u003eDesigned for 2018-2023 Mustang GT 5.0L V8 models\u003c\/li\u003e\n\u003cli\u003eSuits automatic and manual transmission rear-wheel-drive cars\u003c\/li\u003e\n\u003cli\u003eFits two-door coupe (Fastback) and convertible body styles\u003c\/li\u003e\n\u003cli\u003eIntended only for vehicles without the factory Active Valve Performance Exhaust\u003c\/li\u003e\n\u003cli\u003eBorla's signature 'Sound of Power' exhaust tone\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBorla Stainless Construction with Black Tips\u003c\/h3\u003e\u003cp\u003eBorla specializes in designing and manufacturing stainless steel performance exhaust. This S-Type axle-back is the stainless black tip version, pairing a darker rear-end look with the brand's stainless approach to exhaust construction.\u003c\/p\u003e\u003cp\u003eThe company's background in building exhaust systems for classic Rolls-Royce and Ferrari cars informs its current lineup of performance exhaust for street, off-road, and racing vehicles.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eBorla designs the S-Type to give the 5.0L V8 a more aggressive voice under throttle and through each shift than the stock rear section, consistent with the brand's 'Sound of Power' character.\u003c\/p\u003e\u003cp\u003eBorla states that its exhaust upgrades provide a gain in power and torque. The manufacturer does not publish specific figures for this part.\u003c\/p\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eGives a non-Active Valve 2018-2023 Mustang GT a stronger, more distinctive exhaust note without replacing the full system\u003c\/li\u003e\n\u003cli\u003eBlack-finished stainless tips change the rear appearance of the car to a darker, motorsport-styled look\u003c\/li\u003e\n\u003cli\u003eAxle-back design keeps the upgrade confined to the rear section of the exhaust\u003c\/li\u003e\n\u003cli\u003eSpecified for both automatic and manual transmission cars in coupe and convertible body styles\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2018-2023 Ford Mustang GT (5.0L), Fastback \u0026amp; Convertible\u003c\/li\u003e\u003c\/ul\u003e","brand":"Borla","offers":[{"title":"Default Title","offer_id":68305172332729,"sku":"BOR11953BC","price":1299.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/11953BC-main-1-xlarge.jpg?v=1794430555"},{"product_id":"borla-axle-back-exhaust-system-s-type-stainless-black-tips-2018-2023-mustang-11951bc","title":"Borla Axle-Back Exhaust System - S-Type - Stainless Black Tips (2018-2023 Mustang) - 11951BC","description":"\u003cp\u003eThe Borla S-Type Axle-Back Exhaust System, part number 11951BC, replaces the rear section of the factory exhaust on 2018-2023 Mustang GT models, including the Bullitt. It is built for 5.0L V8 cars with either the automatic or manual transmission and is designed specifically for cars equipped with the factory Active Valve Performance Exhaust. This version is finished with stainless black tips for a darker look at the rear fascia.\u003c\/p\u003e\n\u003cp\u003eBorla specializes in stainless steel performance exhaust and is known for its signature \"Sound of Power\" exhaust note. As an axle-back, the S-Type swaps only the components behind the rear axle, so owners can change the sound and rear styling of their Coyote-powered Mustang without replacing the full exhaust. Borla's S-Type is a good fit for GT and Bullitt owners who want the Borla sound and look on a car that already has active exhaust valves.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBorla S-Type axle-back exhaust system, part number 11951BC\u003c\/li\u003e\n\u003cli\u003eStainless tips with a black finish\u003c\/li\u003e\n\u003cli\u003eEngineered for 2018-2023 Mustang GT 5.0L V8, including Bullitt models\u003c\/li\u003e\n\u003cli\u003eCompatible with automatic and manual transmission cars\u003c\/li\u003e\n\u003cli\u003eDesigned for rear-wheel-drive 2-door coupe and convertible body styles\u003c\/li\u003e\n\u003cli\u003eIntended for vehicles equipped with the Active Valve Performance Exhaust\u003c\/li\u003e\n\u003cli\u003eProduces Borla's signature \"Sound of Power\" exhaust tone\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBorla Stainless Steel Exhaust Engineering\u003c\/h3\u003e\u003cp\u003eBorla Performance Industries focuses on designing and manufacturing stainless steel performance exhaust systems. The company first built exhaust systems for concours-level classics such as Rolls-Royce and Ferrari. Today it produces exhaust for modern performance vehicles used on the street, off-road, and in racing.\u003c\/p\u003e\u003cp\u003eOn this S-Type axle-back, the tips are listed as stainless with a black finish. This gives the rear of the Mustang a darker, motorsport-inspired look compared with polished tips.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eThe S-Type delivers Borla's \"Sound of Power,\" the exhaust note the brand is known for among enthusiasts. Because the system is designed around the factory Active Valve Performance Exhaust, it is intended to work with the valved setup already on the car rather than replace it.\u003c\/p\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSwaps in Borla's signature exhaust sound without replacing the entire exhaust system\u003c\/li\u003e\n\u003cli\u003eDesigned specifically for GT and Bullitt Mustangs equipped with the factory active valve exhaust\u003c\/li\u003e\n\u003cli\u003eBlack-finish stainless tips change the rear styling of the car\u003c\/li\u003e\n\u003cli\u003eComes from a manufacturer that specializes in stainless steel performance exhaust\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2018-2023 Ford Mustang Bullitt \/ GT (5.0L), Fastback \u0026amp; Convertible\u003c\/li\u003e\u003c\/ul\u003e","brand":"Borla","offers":[{"title":"Default Title","offer_id":68305182621881,"sku":"BOR11951BC","price":1999.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/11951BC-main-1-xlarge.jpg?v=1794430338"},{"product_id":"mishimoto-2015-2017-mustang-gt-pro-axle-back-exhaust-polished-tips","title":"Mishimoto 2015-2017 Mustang GT Pro Axle Back Exhaust (Polished Tips)","description":"\u003cp\u003eThe Mishimoto Pro Axle-Back Exhaust is a replacement rear exhaust section for the S550 Mustang GT, built from 304 stainless steel with mandrel-bent tubing and finished with polished 4.5-inch double-wall tips. It replaces the factory mufflers behind the axle and connects to the stock exhaust piping, giving the Coyote V8 a noticeably more aggressive voice without requiring a full system swap.\u003c\/p\u003e\n\u003cp\u003eMishimoto designed this axle-back around small-diameter mufflers that raise exhaust volume well above the stock mufflers while still capping maximum sound output. That makes it a good fit for GT owners who want more character under both light and heavy throttle but don't want an uncontrolled drone. It works with manual and automatic transmission cars, retains compatibility with the factory center resonator or aftermarket mid-pipes such as Mishimoto's own X-pipe and H-pipe, and is covered by the Mishimoto Lifetime Warranty.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFull 304 stainless steel construction\u003c\/li\u003e\n\u003cli\u003eMandrel-bent tubing to support exhaust flow from the Coyote engine\u003c\/li\u003e\n\u003cli\u003eTIG-welded assembly\u003c\/li\u003e\n\u003cli\u003ePolished 4.5-inch double-wall exhaust tips\u003c\/li\u003e\n\u003cli\u003eSmall-diameter mufflers that greatly amplify exhaust tone over the stock mufflers while limiting maximum sound output\u003c\/li\u003e\n\u003cli\u003eAggressive exhaust tone under both light and heavy acceleration\u003c\/li\u003e\n\u003cli\u003eCut-and-clamp design developed specifically for the 2015+ Mustang GT\u003c\/li\u003e\n\u003cli\u003eBolt-on exhaust hangers for added adjustability and simpler installation\u003c\/li\u003e\n\u003cli\u003eMates to the factory exhaust piping\u003c\/li\u003e\n\u003cli\u003eCompatible with the stock center resonator, Mishimoto X-pipe and H-pipe, and other aftermarket mid-pipes\u003c\/li\u003e\n\u003cli\u003eFits both manual and automatic transmission vehicles\u003c\/li\u003e\n\u003cli\u003eTips also offered by Mishimoto in a high-temperature black paint finish; this version uses polished tips\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMandrel-Bent 304 Stainless Steel Construction\u003c\/h3\u003e\u003cp\u003eEvery section of this axle-back is made from 304 stainless steel, an alloy chosen for exhaust work because it holds up well to heat and corrosion. The tubing is mandrel-bent, which keeps the pipe diameter consistent through each bend instead of crimping it, so the exhaust path stays smooth as it leaves the factory piping.\u003c\/p\u003e\u003cp\u003eJoints are TIG welded, and the system finishes in double-wall 4.5-inch tips with a polished surface. The hangers bolt on rather than being welded in place, which gives you room to adjust the system's position for proper tip alignment under the rear fascia.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eThe focus of this axle-back is sound. Mishimoto uses small-diameter mufflers that make the exhaust tone considerably louder and more aggressive than the factory mufflers, with the character carrying through both light cruising throttle and full acceleration. Because the muffler design also limits peak sound output, the system stays within a more controlled volume range than a straight-pipe setup.\u003c\/p\u003e\u003cp\u003eMishimoto notes that the axle-back can be paired with its X-pipe or H-pipe for further exhaust performance. Since it is also compatible with the stock center resonator and other aftermarket mid-pipes, you can tune the overall sound by changing the mid-section without replacing the axle-back.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMishimoto states installation takes under an hour\u003c\/li\u003e\n\u003cli\u003eCut-and-clamp design for the 2015+ Mustang GT\u003c\/li\u003e\n\u003cli\u003eConnects to the stock exhaust piping\u003c\/li\u003e\n\u003cli\u003eBolt-on exhaust hangers add adjustability and simplify fitment\u003c\/li\u003e\n\u003cli\u003eWorks with manual and automatic transmission cars\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eYou want a much more aggressive exhaust note from your Coyote V8 than the factory mufflers provide, without excessive maximum volume\u003c\/li\u003e\n\u003cli\u003e304 stainless steel and TIG-welded construction are built for long-term exposure to heat and road conditions\u003c\/li\u003e\n\u003cli\u003ePolished 4.5-inch double-wall tips update the rear appearance of the car\u003c\/li\u003e\n\u003cli\u003eIt retains the stock center resonator or works with an aftermarket X-pipe, H-pipe, or mid-pipe, so it fits into a staged exhaust build\u003c\/li\u003e\n\u003cli\u003eInstallation is quoted at under an hour, with bolt-on hangers for easier alignment\u003c\/li\u003e\n\u003cli\u003eBacked by the Mishimoto Lifetime Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2015 Ford Mustang GT\u003c\/li\u003e\n\u003cli\u003e2015-2026 Ford Mustang GT\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eMishimoto Lifetime Warranty\u003c\/p\u003e","brand":"Mishimoto","offers":[{"title":"Default Title","offer_id":68305192288441,"sku":"MSH-MMEXH-MUS8-15AP","price":508.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/mmexh-mus8-15app_3_1.png?v=1794436070"},{"product_id":"mishimoto-2015-2017-mustang-gt-pro-axle-back-exhaust-black-tips","title":"Mishimoto 2015-2017 Mustang GT Pro Axle Back Exhaust (Black Tips)","description":"\u003cp\u003eThe Mishimoto Pro Axle-Back Exhaust is a replacement rear exhaust section for the S550 Mustang GT, built around the Coyote V8. It replaces the factory mufflers and tips with full 304 stainless steel, mandrel-bent tubing, small-diameter mufflers, and 4.5 inch double wall tips. This version is listed with black tips. Its main job is to give the GT a noticeably more aggressive exhaust note under both light and heavy throttle, while the muffler design keeps maximum sound output in check.\u003c\/p\u003e\n\u003cp\u003eThe system is designed specifically for the 2015 and later Mustang GT and works with both manual and automatic transmission cars. It mates to the stock exhaust piping and stays compatible with the factory center resonator, Mishimoto X-pipes and H-pipes, and other aftermarket mid-pipes, so it can be part of a staged exhaust build. It also carries the Mishimoto Lifetime Warranty.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFull 304 stainless steel construction\u003c\/li\u003e\n\u003cli\u003eMandrel-bent tubing to maintain flow from the Coyote V8\u003c\/li\u003e\n\u003cli\u003eTIG-welded assembly\u003c\/li\u003e\n\u003cli\u003eSmall-diameter mufflers that amplify exhaust tone over the stock mufflers while limiting maximum sound output\u003c\/li\u003e\n\u003cli\u003eAggressive exhaust tone under light and heavy acceleration\u003c\/li\u003e\n\u003cli\u003e4.5 inch double wall exhaust tips, offered in polished or high-temperature black paint finishes (this listing: black tips)\u003c\/li\u003e\n\u003cli\u003eCut-and-clamp design developed specifically for the 2015+ Mustang GT\u003c\/li\u003e\n\u003cli\u003eBolt-on exhaust hangers for added adjustability and easier installation\u003c\/li\u003e\n\u003cli\u003eMates to the stock exhaust piping\u003c\/li\u003e\n\u003cli\u003eCompatible with the stock center resonator, Mishimoto X-pipes and H-pipes, or other aftermarket mid-pipes\u003c\/li\u003e\n\u003cli\u003eFits both manual and automatic transmission vehicles\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e304 Stainless Steel, Mandrel-Bent Construction\u003c\/h3\u003e\u003cp\u003eMishimoto builds this axle-back entirely from 304 stainless steel, and the tubing is mandrel bent so the pipe keeps a consistent diameter through each bend instead of crimping. The joints are TIG welded, and the tips use double wall construction at a 4.5 inch diameter. On this version, the tips are finished in high-temperature black paint.\u003c\/p\u003e\u003cp\u003eBolt-on exhaust hangers are part of the design, which allows the system to be adjusted for proper alignment and tip position during installation.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eSound is the central focus of this system. Mishimoto uses small-diameter mufflers that significantly increase exhaust tone compared to the factory mufflers, giving the Coyote V8 a more aggressive voice under both light and heavy acceleration. The same muffler design also caps the maximum sound output, so the volume increase is controlled rather than unrestricted.\u003c\/p\u003e\u003cp\u003eThe mandrel-bent 304 stainless tubing is intended to provide good flow from the Coyote engine. For owners planning further exhaust work, Mishimoto recommends pairing this axle-back with its X-pipe or H-pipe, and the system also works with the stock center resonator or other aftermarket mid-pipes.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMishimoto states installation takes under an hour\u003c\/li\u003e\n\u003cli\u003eCut-and-clamp design specific to the 2015+ Mustang GT\u003c\/li\u003e\n\u003cli\u003eMates to the factory exhaust piping\u003c\/li\u003e\n\u003cli\u003eBolt-on exhaust hangers allow adjustment during fitment\u003c\/li\u003e\n\u003cli\u003eFits both manual and automatic transmission cars\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eYou want a noticeably more aggressive exhaust tone than the factory mufflers deliver, without unrestricted maximum volume\u003c\/li\u003e\n\u003cli\u003eYou prefer 304 stainless steel, mandrel-bent, TIG-welded construction for a long-lasting rear exhaust section\u003c\/li\u003e\n\u003cli\u003eYou plan to add a Mishimoto X-pipe, H-pipe, or other aftermarket mid-pipe later and want an axle-back that is compatible with them\u003c\/li\u003e\n\u003cli\u003eYou want a project Mishimoto rates at under an hour of install time\u003c\/li\u003e\n\u003cli\u003eYou want a part backed by the Mishimoto Lifetime Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2015 Ford Mustang GT\u003c\/li\u003e\n\u003cli\u003e2015-2026 Ford Mustang GT\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eMishimoto Lifetime Warranty\u003c\/p\u003e","brand":"Mishimoto","offers":[{"title":"Default Title","offer_id":68305308713145,"sku":"MSH-MMEXH-MUS8-15APBK","price":615.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/mmexh-mus8-15apbk_3_1.png?v=1794436077"},{"product_id":"borla-axle-back-exhaust-system-s-type-stainless-steel-tips-2015-2023-mustang-ecoboost-11938","title":"Borla Axle-Back Exhaust System - S-Type - Stainless Steel Tips (2015-2023 Mustang EcoBoost) - 11938","description":"\u003cp\u003eThe Borla S-Type Axle-Back Exhaust System, part number 11938, replaces the factory rear exhaust section on S550 Mustangs with a T-304 stainless steel system tuned for Borla's S-Type sound. Borla describes that sound as aggressive and sporty, and the system is intended to add more character and flow while remaining suitable for daily street driving. It is built around 2.25-inch tubing and finishes with a pair of 4-inch bright chrome, single round rolled angle-cut tips.\u003c\/p\u003e\n\u003cp\u003eThis system is aimed at owners of EcoBoost 2.3L Mustangs, and Borla also lists certain V6 3.7L convertible applications, who want a more assertive exhaust note from a bolt-on part. It combines Borla's patented straight-through, multi-core muffler design with mandrel-bent tubing and CNC-controlled manufacturing for accurate fitment. Borla backs it with its Million-Mile Warranty. It is not intended for cars equipped with the Active Valve Exhaust (four-tip) system.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBorla S-Type sound profile, described by the manufacturer as aggressive and sporty\u003c\/li\u003e\n\u003cli\u003ePremium T-304 stainless steel construction\u003c\/li\u003e\n\u003cli\u003e2.25-inch pipe diameter\u003c\/li\u003e\n\u003cli\u003eTwo 4-inch bright chrome, single round rolled angle-cut tips\u003c\/li\u003e\n\u003cli\u003ePatented straight-through and multi-core muffler technology designed for maximum flow\u003c\/li\u003e\n\u003cli\u003eMandrel-bent tubing for smooth bends\u003c\/li\u003e\n\u003cli\u003ePrecision CNC manufacturing for accurate fitment\u003c\/li\u003e\n\u003cli\u003eBolt-on axle-back design\u003c\/li\u003e\n\u003cli\u003eCovered by Borla's Million-Mile Warranty\u003c\/li\u003e\n\u003cli\u003eBorla part number 11938\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eT-304 Stainless Steel Construction\u003c\/h3\u003e\u003cp\u003eBorla builds the S-Type axle-back from premium T-304 stainless steel. The manufacturer positions this material as a step above the 409 and T-400 series stainless used in lower-cost alternative exhausts.\u003c\/p\u003e\u003cp\u003eThe tubing is formed with mandrel bends, which keeps the bends smooth instead of crimped. Borla pairs this with precision CNC manufacturing so the system lines up correctly with the vehicle's mounting points. The 4-inch tips have a bright chrome finish with a single round, rolled, angle-cut design.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eThe S-Type is one of Borla's established sound levels, and Borla describes its character as aggressive and sporty. The system is designed to change the tone of the car while keeping it street-friendly for regular driving.\u003c\/p\u003e\u003cp\u003eInside the mufflers, Borla uses its patented straight-through, multi-core technology, which the manufacturer says is engineered for maximum flow. Combined with the 2.25-inch mandrel-bent tubing, the system is presented as an upgrade in both sound and exhaust flow over the factory axle-back section.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBolt-on installation, according to the manufacturer\u003c\/li\u003e\n\u003cli\u003eNot compatible with vehicles equipped with the Active Valve Exhaust (four-tip) system\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eYou want a more aggressive, sporty exhaust note than the factory system without giving up street drivability\u003c\/li\u003e\n\u003cli\u003eYou want T-304 stainless steel construction and Borla's Million-Mile Warranty\u003c\/li\u003e\n\u003cli\u003eYou want a bolt-on axle-back that uses mandrel bends and CNC manufacturing for accurate fitment\u003c\/li\u003e\n\u003cli\u003eYou want 4-inch bright chrome angle-cut tips to improve the rear appearance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2015-2023 Ford Mustang EcoBoost (2.3L)\u003c\/li\u003e\n\u003cli\u003e2015-2017 Ford Mustang V6 \/ EcoBoost (3.7L), Convertible\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment notes:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eEXCEPT vehicles equipped with Active Valve Exhaust (4 tips)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eBorla Million-Mile Warranty\u003c\/p\u003e","brand":"Borla","offers":[{"title":"Default Title","offer_id":68305311957177,"sku":"BOR11938","price":1049.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/11938-main-1-xlarge.jpg?v=1794430349"},{"product_id":"corsa-performance-3-active-axle-back-exhaust-system-reuses-oe-tips-sport-2015-2020-shelby-gt350-gt350r-21098","title":"Corsa Performance 3\" Active Axle Back Exhaust System, Reuses OE Tips - Sport (2015-2020 Shelby GT350 \/ GT350R) - 21098","description":"\u003cp\u003eThe Corsa Performance 21098 is a 3.0-inch active axle-back exhaust built from 304 stainless steel for the Shelby GT350 and GT350R. It has dual rear exits and active valves, and it is designed as the rear section of a Corsa exhaust: it mounts only to Corsa mid-pipes and will not connect to the factory exhaust. This listing is the Sport sound version, and per the product title it reuses the original equipment tips.\u003c\/p\u003e\n\u003cp\u003eThe system's main purpose is to give the 5.2L Voodoo V8 a louder, more aggressive voice without the cabin drone that often comes with performance exhaust. Corsa does this with its patented Reflective Sound Cancellation (RSC) technology and a valve setup that keeps the exhaust note controllable. Corsa's acoustic engineers tuned the sound specifically for the GT350, and the system is manufactured in the United States. Owners who already run, or plan to run, Corsa XX or HH mid-pipes get a matched rear section that bolts on without cutting.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e3.0-inch tubing diameter\u003c\/li\u003e\n\u003cli\u003e304 stainless steel construction\u003c\/li\u003e\n\u003cli\u003eDual rear exit axle-back layout\u003c\/li\u003e\n\u003cli\u003eActive valves for a controllable exhaust note\u003c\/li\u003e\n\u003cli\u003eRetains and reuses the factory valve module\u003c\/li\u003e\n\u003cli\u003eStraight-through muffler design\u003c\/li\u003e\n\u003cli\u003eCorsa patented Reflective Sound Cancellation (RSC) technology to control drone\u003c\/li\u003e\n\u003cli\u003eSignature Corsa exhaust note tuned specifically for the Mustang GT350\u003c\/li\u003e\n\u003cli\u003eSport sound level, per the product title\u003c\/li\u003e\n\u003cli\u003eReuses the OE tips, per the product title\u003c\/li\u003e\n\u003cli\u003eDesigned to mate only with Corsa mid-pipes, including the Corsa XX and HH mid-pipes\u003c\/li\u003e\n\u003cli\u003eManufactured in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e3.0-Inch 304 Stainless Steel Construction\u003c\/h3\u003e\u003cp\u003eCorsa builds this axle-back from 304 stainless steel in a 3.0-inch diameter, and the system is made in the USA. Corsa covers the exhaust itself with a lifetime warranty and covers the valves for 5 years.\u003c\/p\u003e\u003cp\u003eThe mufflers use a straight-through internal design, and the axle-back is engineered to line up directly with Corsa's XX and HH mid-pipes. Because it is built around Corsa's own mid-pipe connections, it cannot be mounted to the stock exhaust.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eCorsa's goal for this system is an aggressive but controllable exhaust note tailored to the character of the GT350's 5.2L Voodoo V8. The tone was tuned by Corsa's acoustic engineers specifically for this car, and this version is the Sport sound level.\u003c\/p\u003e\u003cp\u003eDrone control comes from Corsa's patented Reflective Sound Cancellation (RSC) technology, which works alongside Corsa's proprietary valve assembly. The active valves let the driver change how much sound the system produces, with louder output when wanted and less intrusive cabin noise while cruising.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBolt-on installation with no cutting required\u003c\/li\u003e\n\u003cli\u003eCorsa states installation takes about an hour\u003c\/li\u003e\n\u003cli\u003eRequires Corsa mid-pipes, such as the Corsa XX or HH mid-pipes; it does not fit the stock exhaust\u003c\/li\u003e\n\u003cli\u003eThe factory valve module is retained and reused\u003c\/li\u003e\n\u003cli\u003eThe OE exhaust tips are reused, per the product title\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAdds a louder, GT350-specific exhaust note while RSC technology keeps cabin drone under control\u003c\/li\u003e\n\u003cli\u003eActive valves give you control over sound level for daily driving or spirited runs\u003c\/li\u003e\n\u003cli\u003eCompletes the rear of a Corsa exhaust for owners running Corsa XX or HH mid-pipes\u003c\/li\u003e\n\u003cli\u003e304 stainless steel construction is backed by a lifetime warranty on the exhaust and 5 years on the valves\u003c\/li\u003e\n\u003cli\u003eBolts on in about an hour with no cutting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2015-2020 Ford Mustang GT350R \/ GT350\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment notes:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eDoes not fit to stock exhaust **\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eLifetime warranty on the exhaust; 5-year warranty on the valves.\u003c\/p\u003e","brand":"Corsa Performance","offers":[{"title":"Default Title","offer_id":68305311989945,"sku":"COR21098","price":1803.11,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/21098_a_lowres_d6f78286-b1dd-4dd8-8bf1-77fe8eb7a1ff.jpg?v=1794378224"},{"product_id":"roush-dual-tip-axle-back-exhaust-black-tip-2024-2026-mustang-gt-ecoboost-422333-blk","title":"Roush Dual Tip Axle Back Exhaust - Black Tip (2024-2026 Mustang GT \/ EcoBoost) - 422333-BLK","description":"\u003cp\u003eThe Roush 422333-BLK is a dual tip axle-back exhaust built for the 2024-2026 Mustang GT and EcoBoost. It replaces the factory section behind the rear axle with T-304 stainless steel components, mandrel-bent tubing, and black-finished tips.\u003c\/p\u003e\n\u003cp\u003eRoush designed this system to improve exhaust flow by reducing back pressure, while the black tips give the rear of the car a darker, more aggressive look. The components are built for a precise fit and a factory-like finish, and Roush covers the system with its Limited Lifetime Warranty. It suits owners of current-generation Mustangs who want a stainless axle-back upgrade from an established Mustang performance brand.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAxle-back exhaust configuration\u003c\/li\u003e\n\u003cli\u003eDual tip design\u003c\/li\u003e\n\u003cli\u003eBlack-finished exhaust tips\u003c\/li\u003e\n\u003cli\u003eConstructed from T-304 stainless steel\u003c\/li\u003e\n\u003cli\u003eMandrel-bent tubing for improved exhaust flow\u003c\/li\u003e\n\u003cli\u003eEngineered to reduce back pressure\u003c\/li\u003e\n\u003cli\u003eComponents built for a precise fit and factory-like finish\u003c\/li\u003e\n\u003cli\u003eRoush part number 422333-BLK\u003c\/li\u003e\n\u003cli\u003eCovered by the Roush Limited Lifetime Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eT-304 Stainless Steel Construction\u003c\/h3\u003e\u003cp\u003eRoush builds this axle-back from T-304 stainless steel, a material chosen for its durability and resistance to corrosion. That matters on a component that hangs at the back of the car and is exposed to heat cycles, road moisture, and debris.\u003c\/p\u003e\u003cp\u003eThe tubing is mandrel bent, which holds a consistent diameter through each bend instead of crimping or flattening the pipe. Roush states that each component is made to fit precisely and deliver a factory-like finish once installed.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eThe mandrel-bent tubing is intended to improve exhaust flow and lower back pressure compared with a restrictive path. Roush describes the result as a performance improvement but does not publish specific horsepower or torque figures for this system.\u003c\/p\u003e\u003cp\u003eVisually, the black tips add a darker, more aggressive appearance to the rear of the Mustang.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eRoush describes the system as designed for easy installation, with components built for a precise fit\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eReplaces the factory axle-back section with T-304 stainless steel components for durability and corrosion resistance\u003c\/li\u003e\n\u003cli\u003eMandrel-bent tubing is designed to improve flow and reduce back pressure\u003c\/li\u003e\n\u003cli\u003eBlack tips give the rear of the car a darker, more aggressive look\u003c\/li\u003e\n\u003cli\u003eBuilt to fit precisely with a factory-like finish\u003c\/li\u003e\n\u003cli\u003eBacked by the Roush Limited Lifetime Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2024-2026 Ford Mustang EcoBoost \/ GT\u003c\/li\u003e\n\u003cli\u003e2024-2026 Ford Mustang EcoBoost \/ GT\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eRoush Limited Lifetime Warranty\u003c\/p\u003e","brand":"Roush","offers":[{"title":"Default Title","offer_id":68305436541113,"sku":"RSH422333-BLK","price":799.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/roush_2024_mustang_gt_ecoboost_axle_back_exhaust_-_black_tip_3_-_compressed.jpg?v=1794436092"},{"product_id":"roush-15-26-mustang-v6-ecoboost-black-tip-axle-back-exhaust","title":"Roush 15-26 Mustang V6 \/ EcoBoost Black Tip Axle Back Exhaust","description":"\u003cp\u003eThe Roush Black Tip Axle-Back Exhaust is an aftermarket exhaust from Roush for EcoBoost and V6-powered Ford Mustangs. As an axle-back, it replaces the factory exhaust from the rear axle rearward, the most visible part of the system. The black tips set it apart visually from the stock outlets.\u003c\/p\u003e\n\u003cp\u003eRoush has a long history building performance parts for the Mustang, and this axle-back is made specifically for the four-cylinder EcoBoost and V6 versions of the car. For owners who want a Roush exhaust with a darker finish at the tips on one of these models, this is a focused, application-specific option.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAxle-back exhaust configuration that replaces the rear section of the factory exhaust\u003c\/li\u003e\n\u003cli\u003eBlack exhaust tips\u003c\/li\u003e\n\u003cli\u003eManufactured by Roush\u003c\/li\u003e\n\u003cli\u003eMade for Mustang EcoBoost and Mustang V6 models\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eReplaces the factory exhaust from the rear axle back with a Roush-branded system\u003c\/li\u003e\n\u003cli\u003eBlack tips give the rear of the car a different look than the factory outlets\u003c\/li\u003e\n\u003cli\u003eMade specifically for EcoBoost and V6 Mustang applications rather than adapted from another model\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2015-2026 Ford Mustang EcoBoost \/ V6\u003c\/li\u003e\u003c\/ul\u003e","brand":"Roush","offers":[{"title":"Default Title","offer_id":68305436967097,"sku":"RSH421837-BLK","price":729.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/12ea6d06531f280b61613e1a11fee149L.png?v=1794436093"},{"product_id":"ford-performance-2015-2017-mustang-gt-50-state-legal-touring-axle-back-m-5230-m8tc","title":"Ford Performance 2015-2017 Mustang GT 50 State Legal Touring Axle Back - M-5230-M8TC","description":"\u003cp\u003eThe Ford Performance Touring Axle-Back, part number M-5230-M8TC, is a replacement rear exhaust section for the 2015-2017 Mustang GT with the 5.0L V8. It replaces the factory components from the axle rearward and was designed and tuned by Ford Performance to give the Coyote-powered GT a more aggressive exhaust note while improving performance and holding up over the long term. The system is built from 2.5-inch mandrel-bent stainless steel tubing and finishes with 4-inch chrome-plated stainless steel tips.\u003c\/p\u003e\n\u003cp\u003eFor owners who want a stronger sound without legal complications, this axle-back is 50-state legal and stays within the 95 dB drive-by limit set for aftermarket exhaust, as long as the car is otherwise in stock configuration. It mounts using the factory hangers and mounting points, which makes it a practical upgrade for GT owners, in both coupe and convertible form, who want factory-engineered parts from the manufacturer that builds the car.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFord Performance part number M-5230-M8TC, Touring sound version\u003c\/li\u003e\n\u003cli\u003eDesigned and tuned by Ford Performance for performance, aggressive sound, and durability\u003c\/li\u003e\n\u003cli\u003e50-state legal\u003c\/li\u003e\n\u003cli\u003eComplies with the 95 dB drive-by sound limit for aftermarket exhaust when installed on an otherwise stock vehicle\u003c\/li\u003e\n\u003cli\u003e2.5-inch mandrel-bent stainless steel tubing\u003c\/li\u003e\n\u003cli\u003e4-inch chrome-plated stainless steel tips\u003c\/li\u003e\n\u003cli\u003eMounts to the stock hangers and mounting points\u003c\/li\u003e\n\u003cli\u003eClamp-on muffler design\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMandrel-Bent Stainless Steel Construction\u003c\/h3\u003e\u003cp\u003eThe tubing is 2.5-inch stainless steel formed with mandrel bending, a process that keeps the pipe diameter consistent through each bend rather than allowing it to crimp or flatten. Stainless steel was chosen for durability, and Ford Performance lists long-term durability as one of the design goals for this system.\u003c\/p\u003e\u003cp\u003eEach outlet is finished with a 4-inch tip made from stainless steel and then chrome plated, giving the rear of the car a bright, finished appearance that complements the GT's rear fascia.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eFord Performance tuned this axle-back to deliver a more aggressive exhaust tone than the factory system, aiming for an engaging driving experience along with improved performance. The Touring designation identifies the sound profile of this particular version.\u003c\/p\u003e\u003cp\u003eDespite the more assertive sound, the system remains within the 95 dB drive-by threshold for aftermarket exhaust when fitted to a stock application, and it carries 50-state legal status.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eUses the factory exhaust hangers and mounts, so no new mounting hardware locations are needed\u003c\/li\u003e\n\u003cli\u003eThe factory exhaust pipe must be cut in order to install the clamp-on Ford Performance mufflers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAdds a more aggressive exhaust sound to a 2015-2017 Mustang GT 5.0L while remaining 50-state legal\u003c\/li\u003e\n\u003cli\u003eStays within the 95 dB drive-by limit for aftermarket exhaust on a stock application, reducing concerns about noise compliance\u003c\/li\u003e\n\u003cli\u003eStainless steel mandrel-bent tubing and chrome-plated stainless tips are built for durability\u003c\/li\u003e\n\u003cli\u003eBolts up to the stock hangers and mounts, keeping the installation straightforward apart from cutting the factory pipe\u003c\/li\u003e\n\u003cli\u003eEngineered and tuned by Ford Performance specifically for the S550 Mustang GT\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2015-2017 Ford Mustang GT (5.0L), Fastback \u0026amp; Convertible\u003c\/li\u003e\u003c\/ul\u003e","brand":"Ford Performance Parts","offers":[{"title":"Default Title","offer_id":68305437753529,"sku":"FPP-M-5230-M8TC","price":938.63,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/M-5230-M8SC_7.jpg?v=1794436094"},{"product_id":"ford-performance-2018-2023-mustang-gt-5-0l-sport-muffler-kit-chrome-tips-m-5230-m8sca","title":"Ford Performance 2018-2023 Mustang GT 5.0L Sport Muffler Kit - Chrome Tips - M-5230-M8SCA","description":"\u003cp\u003eThe Ford Performance M-5230-M8SCA Sport Muffler Kit is an axle-back exhaust upgrade developed for the 2018-2023 Mustang GT with the 5.0L V8. It replaces the factory mufflers with a Ford Performance system that pairs 2.5 inch mandrel-bent stainless steel tubing with 4 inch chrome-plated stainless steel tips. Ford Performance designed and tuned the kit to deliver a more aggressive exhaust note along with performance, durability, and a more engaging driving experience.\u003c\/p\u003e\n\u003cp\u003eFor S550 Mustang GT owners who want a stronger sound and a cleaner look at the rear of the car without replacing the entire exhaust, an axle-back kit is a practical place to start. This system is built from 304 stainless steel, with smooth mandrel bends and warp-free flanges, and it mounts using the factory hangers and mounts. Because it comes from Ford's own performance division, it is engineered specifically around the 5.0L GT platform.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAxle-back sport muffler kit for the 2018-2023 Mustang GT 5.0L\u003c\/li\u003e\n\u003cli\u003eConstructed from 304 stainless steel\u003c\/li\u003e\n\u003cli\u003e2.5 inch stainless steel mandrel-bent tubing\u003c\/li\u003e\n\u003cli\u003eUltra-smooth mandrel bends\u003c\/li\u003e\n\u003cli\u003eWarp-free flanges\u003c\/li\u003e\n\u003cli\u003e4 inch chrome-plated stainless steel tips\u003c\/li\u003e\n\u003cli\u003eDesigned and tuned for performance, aggressive sound, and durability\u003c\/li\u003e\n\u003cli\u003eInstalls using stock hangers and mounts\u003c\/li\u003e\n\u003cli\u003eFord Performance part number M-5230-M8SCA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e304 Stainless Steel Construction\u003c\/h3\u003e\u003cp\u003eFord Performance builds this muffler kit from 304 stainless steel, an alloy widely used in exhaust systems for its resistance to corrosion. The tubing measures 2.5 inches and is mandrel bent, which keeps the pipe diameter consistent through each bend rather than allowing it to crimp or flatten.\u003c\/p\u003e\u003cp\u003eThe flanges are designed to stay warp-free, which helps maintain a proper seal at the connection points over time. The 4 inch tips are also stainless steel underneath their chrome plating, giving the visible end of the system a bright finish while staying consistent with the rest of the construction.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eFord Performance tuned this kit to produce a more aggressive exhaust sound than the factory mufflers while still aiming for optimum performance and durability. The smooth mandrel bends in the 2.5 inch tubing preserve a uniform internal diameter through the system, avoiding the restrictions created by crush-bent pipe.\u003c\/p\u003e\u003cp\u003eVisually, the 4 inch chrome-plated tips give the rear of the Mustang GT a polished, finished appearance.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMounts using the stock exhaust hangers and mounts\u003c\/li\u003e\n\u003cli\u003eThe factory exhaust pipe must be cut to install the clamp-on Ford Performance axle-back mufflers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAdds a more aggressive exhaust note to the 5.0L Mustang GT than the factory mufflers provide\u003c\/li\u003e\n\u003cli\u003e304 stainless steel construction and warp-free flanges are built for long-term durability\u003c\/li\u003e\n\u003cli\u003eMandrel-bent 2.5 inch tubing maintains consistent diameter through the bends\u003c\/li\u003e\n\u003cli\u003e4 inch chrome-plated stainless tips refresh the look of the rear fascia\u003c\/li\u003e\n\u003cli\u003eUses the factory hangers and mounts, so no additional mounting hardware is needed\u003c\/li\u003e\n\u003cli\u003eEngineered by Ford Performance specifically for the 2018-2023 Mustang GT 5.0L\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2018-2023 Ford Mustang GT (5.0L)\u003c\/li\u003e\n\u003cli\u003e2018-2023 Ford Mustang GT (5.0L), Fastback \u0026amp; Convertible\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ford Performance Parts","offers":[{"title":"Default Title","offer_id":68305552670905,"sku":"FPP-M-5230-M8SCA","price":1075.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/M-5230-M8SCA_11.jpg?v=1794436102"},{"product_id":"roush-304ss-axle-back-kit-round-tips-2015-2017-2026-mustang-gt-421834","title":"Roush 304SS Axle Back Kit (Round Tips) (2015-2017 \/ 2026 Mustang GT) - 421834","description":"\u003cp\u003eThe Roush 421834 is an axle-back exhaust kit for the 5.0L V8 Mustang. It replaces the factory components behind the rear axle with a mandrel-bent T-304 stainless steel system that uses single-tip high-flow mufflers finished with round tips. Roush designed this kit to give the V8 a more aggressive voice than the stock exhaust and to improve flow through the rear section of the system.\u003c\/p\u003e\n\u003cp\u003eFor owners who want a noticeably louder, deeper exhaust note without replacing the entire system, an axle-back is a practical starting point. The Roush kit combines corrosion-resistant stainless construction with mandrel-bent tubing, which keeps the inner diameter consistent through each bend. According to Roush, this kit is intended for coupe body styles only.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAxle-back exhaust configuration\u003c\/li\u003e\n\u003cli\u003eConstructed from corrosion-resistant T-304 stainless steel\u003c\/li\u003e\n\u003cli\u003eMandrel-bent tubing that holds a constant inner diameter with no kinks or creases\u003c\/li\u003e\n\u003cli\u003eMandrel bending improves exhaust flow and reduces backpressure, per Roush\u003c\/li\u003e\n\u003cli\u003eSingle-tip high-flow mufflers\u003c\/li\u003e\n\u003cli\u003eRound exhaust tips\u003c\/li\u003e\n\u003cli\u003eLouder, deeper tone than stock with a V8 burble at idle and a strong roar at high rpm\u003c\/li\u003e\n\u003cli\u003eManufacturer part number 421834\u003c\/li\u003e\n\u003cli\u003eManufacturer notes the kit fits coupes only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMandrel-Bent T-304 Stainless Steel Construction\u003c\/h3\u003e\u003cp\u003eRoush builds this axle-back from T-304 stainless steel, a material selected for its resistance to corrosion. That makes it a sensible choice for an exhaust component that sits at the rear of the car, where it is exposed to road spray, moisture, and heat cycling.\u003c\/p\u003e\u003cp\u003eEvery bend in the system is mandrel formed. Unlike crush bending, mandrel bending keeps the inside diameter of the tubing consistent through the bend and avoids kinks and creased sections. That uniform cross-section is what allows the system to move exhaust gas more freely.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eBecause the tubing keeps a constant inner diameter, Roush states that the system improves exhaust flow and lowers backpressure compared with a restricted path. The high-flow mufflers are tuned to change the factory V8 sound rather than simply quiet it.\u003c\/p\u003e\u003cp\u003eOn the sound side, expect a louder and deeper exhaust note than the stock setup. At idle the engine settles into a pronounced V8 burble, and the tone builds into a strong roar as rpm climbs.\u003c\/p\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eYou want a louder, deeper V8 exhaust tone than the factory system delivers, with a distinct burble at idle and more presence at high rpm.\u003c\/li\u003e\n\u003cli\u003eYou prefer a rear-section upgrade rather than a full exhaust replacement.\u003c\/li\u003e\n\u003cli\u003eYou want T-304 stainless steel construction for corrosion resistance.\u003c\/li\u003e\n\u003cli\u003eYou value mandrel-bent tubing that keeps a consistent inner diameter for improved flow and reduced backpressure.\u003c\/li\u003e\n\u003cli\u003eYou want a single-tip, round-tip appearance from an established Mustang brand.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2026 Ford Mustang (5.0L)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eSingle-tip high-flow mufflers\u003c\/li\u003e\u003c\/ul\u003e","brand":"Roush","offers":[{"title":"Default Title","offer_id":68305553195193,"sku":"RSH421834","price":799.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/421834-1-800x600.jpg?v=1794436102"},{"product_id":"roush-304ss-axle-back-kit-round-tips-2015-2017-mustang-v6-2015-2026-mustang-2-3l-ecoboost-421837","title":"Roush 304SS Axle Back Kit (Round Tips) (2015-2017 Mustang V6 \/ 2015-2026 Mustang 2.3L EcoBoost) - 421837","description":"\u003cp\u003eThe Roush 304SS Axle Back Kit, part number 421837, is a replacement axle-back exhaust for the S550 Mustang, designed to work on both the V6 and the 2.3L EcoBoost. Both engines deliver strong performance for their cylinder count, but the factory exhaust leaves them quieter and more subdued than many Mustang owners want. This Roush system addresses that with high-flow mufflers and round tips that give the car a more assertive voice.\u003c\/p\u003e\n\u003cp\u003eThe kit is built from T-304 stainless steel and uses constant diameter mandrel bends to keep exhaust flow high and backpressure low. It bolts to the factory mounting points and requires no modification or welding, which makes it a practical upgrade for V6 and EcoBoost owners who want a louder, more aggressive sound from a proven Mustang aftermarket name.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRoush part number 421837\u003c\/li\u003e\n\u003cli\u003eAxle-back exhaust configuration\u003c\/li\u003e\n\u003cli\u003eT-304 stainless steel construction\u003c\/li\u003e\n\u003cli\u003eCorrosion- and stain-resistant material\u003c\/li\u003e\n\u003cli\u003eConstant diameter mandrel-bent tubing\u003c\/li\u003e\n\u003cli\u003eEngineered to maintain high flow and reduce backpressure\u003c\/li\u003e\n\u003cli\u003eHigh-flow mufflers with single tip outlets\u003c\/li\u003e\n\u003cli\u003eRound exhaust tips\u003c\/li\u003e\n\u003cli\u003eMounts to factory mounting points\u003c\/li\u003e\n\u003cli\u003eNo modification or welding required\u003c\/li\u003e\n\u003cli\u003eDesigned to fit both V6 and 2.3L EcoBoost Mustangs\u003c\/li\u003e\n\u003cli\u003eNoticeably louder than the stock exhaust\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eT-304 Stainless Steel Construction\u003c\/h3\u003e\u003cp\u003eRoush fabricates this axle-back from T-304 stainless steel, a material chosen for its resistance to corrosion and staining. That matters on a component that sits at the rear of the car and is exposed to heat cycling, road spray, and weather.\u003c\/p\u003e\u003cp\u003eThe tubing is formed with constant diameter mandrel bends, so the pipe keeps its full inside diameter through each curve rather than narrowing the way crush-bent tubing can. Preserving that diameter helps keep exhaust gases moving freely and limits backpressure.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eCompared with the factory system, this exhaust is noticeably louder. At idle it settles into a lower, fuller note, and as engine speed rises the sound takes on a sharper, raspier edge that suits the character of a Mustang.\u003c\/p\u003e\u003cp\u003eThe high-flow mufflers and mandrel-bent tubing work together to support exhaust flow and reduce backpressure, improving both the sound and the performance of the car according to Roush. Because the system is louder than stock, check your local noise ordinances to confirm it is legal where you drive.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eUses the factory mounting points\u003c\/li\u003e\n\u003cli\u003eNo modification or welding required\u003c\/li\u003e\n\u003cli\u003eDesigned to fit both V6 and 2.3L EcoBoost Mustangs with the same kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eGives a V6 or EcoBoost Mustang a louder, more aggressive exhaust note than the factory system\u003c\/li\u003e\n\u003cli\u003eT-304 stainless steel resists corrosion and staining for long-term appearance and durability\u003c\/li\u003e\n\u003cli\u003eMandrel bends maintain full tube diameter to support flow and reduce backpressure\u003c\/li\u003e\n\u003cli\u003eBolt-on fitment at factory mounting points with no cutting or welding\u003c\/li\u003e\n\u003cli\u003eRound tips provide a finished look at the rear of the car\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2015 Ford Mustang\u003c\/li\u003e\u003c\/ul\u003e","brand":"Roush","offers":[{"title":"Default Title","offer_id":68305558110393,"sku":"RSH421837","price":729.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/421837-1-800x600.jpg?v=1794436103"},{"product_id":"corsa-performance-3-0-dual-rear-exit-sport-axle-back-exhaust-system-black-pvd-4-0-slash-cut-tips-2024-2026-mustang-gt-coupe-w-active-exhaust-21261blk","title":"Corsa Performance 3.0” Dual Rear Exit Sport Axle-Back Exhaust System - Black PVD 4.0” Slash Cut Tips (2024-2026 Mustang GT Coupe w\/ Active Exhaust) - 21261BLK","description":"\u003cp\u003eThe Corsa Performance 21261BLK is a 3.0-inch axle-back exhaust system for the S650 Mustang GT with the 5.0L V8. It replaces the factory exhaust from the axle rearward and keeps a dual rear exit layout, finished with 4.0-inch tips in a quad tip arrangement. It is designed specifically for cars equipped with the factory active valve exhaust.\u003c\/p\u003e\n\u003cp\u003eCorsa rates this system's sound level as Sport to Touring Active, so the exhaust note changes along with the factory active valve settings rather than staying fixed at one volume. For owners who want a Corsa sound on their GT while keeping the factory active exhaust control, this axle-back works with the stock Active Exhaust Module and fits the factory rear exit configuration.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAxle-back exhaust system\u003c\/li\u003e\n\u003cli\u003e3.0-inch pipe diameter\u003c\/li\u003e\n\u003cli\u003eDual rear exit configuration\u003c\/li\u003e\n\u003cli\u003eQuad tip style with 4.0-inch tips\u003c\/li\u003e\n\u003cli\u003eDual wall tip construction\u003c\/li\u003e\n\u003cli\u003eSound level rated by Corsa as Sport to Touring Active\u003c\/li\u003e\n\u003cli\u003eDesigned for vehicles with factory active valve exhaust only\u003c\/li\u003e\n\u003cli\u003eWorks with the factory Active Exhaust Module\u003c\/li\u003e\n\u003cli\u003eManufacturer part number 21261BLK\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eCorsa classifies this axle-back's sound level as Sport to Touring Active. Because it works with the factory active valve hardware and Active Exhaust Module, the driver can still switch the exhaust note through the car's active exhaust modes instead of being locked into a single sound level.\u003c\/p\u003e\u003cp\u003eThe system uses 3.0-inch tubing behind the axle and keeps the dual rear exit layout, ending in 4.0-inch dual wall tips in a quad tip arrangement.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFor vehicles equipped with factory active valve exhaust only\u003c\/li\u003e\n\u003cli\u003eThe factory Active Exhaust Module must be used for installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eReplaces the factory axle-back section with a Corsa 3.0-inch system on an active exhaust equipped Mustang GT\u003c\/li\u003e\n\u003cli\u003eKeeps factory active exhaust control through the stock Active Exhaust Module\u003c\/li\u003e\n\u003cli\u003eSport to Touring Active sound level lets the exhaust note follow the selected active exhaust mode\u003c\/li\u003e\n\u003cli\u003e4.0-inch quad tips in a dual rear exit layout fit the factory rear exit configuration\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2024 Ford Mustang GT (5.0L), Fastback\u003c\/li\u003e\u003c\/ul\u003e","brand":"Corsa Performance","offers":[{"title":"Default Title","offer_id":68305559191737,"sku":"COR21261BLK","price":1927.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/21261_a_lowres_1e6e2bf5-24d8-4fc2-b56c-0ec6c28d7278.jpg?v=1794430787"},{"product_id":"corsa-2024-ford-mustang-gt-sport-axle-back-dual-rear-exit-with-4-5in-straight-cut-polished-tips","title":"Corsa 2024+ Ford Mustang GT Sport Axle-Back Dual Rear Exit with 4.5in Straight Cut Polished Tips","description":"\u003cp\u003eThe Corsa Performance Sport Axle-Back is a 3.0 in. dual rear exit exhaust system built for the seventh-generation S650 Mustang GT and its Coyote V8. It is constructed from 304 stainless steel and uses custom-tuned, straight-through mufflers developed specifically for this engine. It finishes at the rear fascia with 4.5 in. dual wall straight cut polished tips. The system bolts directly to the factory resonated mid-pipe, which makes it a direct replacement for the rear section of the stock exhaust.\u003c\/p\u003e\n\u003cp\u003eCorsa designed the Sport version to deliver a moderately aggressive tone, rated at 8 decibels louder than stock. The extra volume is most noticeable at cold start and under hard acceleration. At cruise, Corsa's No DRONE RSC technology is intended to keep the cabin quiet and free of drone. The straight-through muffler design increases flow by 46 percent, according to Corsa, which helps the system support other performance modifications. For S650 GT owners who want a noticeably stronger exhaust note without drone on the highway, this is an American-made system engineered and built in Berea, Ohio.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e3.0 in. axle-back exhaust system with dual rear exit\u003c\/li\u003e\n\u003cli\u003e304 stainless steel construction\u003c\/li\u003e\n\u003cli\u003eCustom-tuned mufflers engineered specifically for the 7th Generation Mustang Coyote V8\u003c\/li\u003e\n\u003cli\u003eStraight-through muffler design\u003c\/li\u003e\n\u003cli\u003eManufacturer-stated 46 percent increase in exhaust flow\u003c\/li\u003e\n\u003cli\u003eSport sound level rated at 8 decibels louder than stock\u003c\/li\u003e\n\u003cli\u003eNo DRONE RSC technology to keep the cabin free of drone at cruise\u003c\/li\u003e\n\u003cli\u003e4.5 in. dual wall stainless steel straight cut tips with polished finish\u003c\/li\u003e\n\u003cli\u003eBolts directly to the stock resonated mid-pipe\u003c\/li\u003e\n\u003cli\u003eEngineered and made in Berea, OH\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e304 Stainless Steel Construction, Made in Berea, Ohio\u003c\/h3\u003e\u003cp\u003eCorsa builds the Sport axle-back from 304 stainless steel throughout the system. The mufflers are not generic units. Corsa engineered and tuned them specifically for the Coyote V8 in the seventh-generation Mustang.\u003c\/p\u003e\u003cp\u003eThe 4.5 in. tips use dual wall stainless steel construction and come in a straight cut profile with a polished finish. Corsa designs and manufactures its exhaust systems in Berea, Ohio.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eThe Sport configuration is Corsa's moderately aggressive option, rated at 8 decibels louder than the factory exhaust. It is tuned to sound noticeably stronger at cold start and under heavy throttle.\u003c\/p\u003e\u003cp\u003eCorsa's No DRONE RSC technology targets the drone that often comes with louder aftermarket exhausts. The goal is a quiet cabin at steady cruising speeds, so the added volume is there when you accelerate but does not wear on you during highway driving.\u003c\/p\u003e\u003cp\u003eThe straight-through muffler design is rated by Corsa to increase flow by 46 percent. The added flow helps drivers get the most out of other performance modifications on the car.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eBolts directly to the stock resonated mid-pipe\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eYou want a clearly louder exhaust, rated at 8 dB over stock, without drone on the highway.\u003c\/li\u003e\n\u003cli\u003eThe mufflers are tuned specifically for the S650 Coyote V8 rather than adapted from another application.\u003c\/li\u003e\n\u003cli\u003e304 stainless steel construction and dual wall tips are suited to long-term ownership.\u003c\/li\u003e\n\u003cli\u003eThe straight-through design and stated 46 percent flow increase complement other performance upgrades.\u003c\/li\u003e\n\u003cli\u003eIt bolts directly to the stock resonated mid-pipe, so it is a direct replacement for the factory rear section.\u003c\/li\u003e\n\u003cli\u003eIt is made in Berea, Ohio, and backed by a Corsa Lifetime Warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2024 Ford Mustang GT\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eBacked by a Corsa Performance Lifetime Warranty\u003c\/p\u003e","brand":"Corsa Performance","offers":[{"title":"Default Title","offer_id":68305569939641,"sku":"COR21253","price":1349.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/21253_a_lowres.jpg?v=1794430378"},{"product_id":"corsa-performance-21039blk-3-sport-axle-back-exhaust-system-with-4-black-tips-2018-2023-ford-mustang-gt","title":"Corsa Performance 21039BLK 3\" Sport Axle-Back Exhaust System with 4\" Black Tips (2018-2023 Ford Mustang GT)","description":"\u003cp\u003eThe Corsa Performance 21039BLK is a 3.0 inch Sport axle-back exhaust system for the 2018-2023 Ford Mustang GT with the 5.0L V8. It replaces the factory rear section with a dual rear exit layout finished in twin 4.0 inch Black Pro-Series tips. It is built specifically for cars that do not have the factory Active Valve exhaust. Corsa designs, engineers, and manufactures the system in Berea, Ohio, and builds it from premium stainless steel.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer-stated gains:\u003c\/strong\u003e Corsa lists gains of +5 horsepower and +4 torque (torque units not specified by the manufacturer). Corsa states that these figures are not a guarantee and that results on an individual vehicle may differ.\u003c\/p\u003e\n\u003cp\u003eThe system uses Corsa's Sport sound level, which the company describes as its most popular. Owners get a distinct rumble at idle and an aggressive tone as the car moves through the gears. Corsa's patented RSC Technology is intended to keep the cabin free of drone at cruising speed. The kit bolts on without welding, making it a practical upgrade for GT owners who want more sound and a sharper rear appearance in a single install.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e3.0 inch axle-back exhaust system\u003c\/li\u003e\n\u003cli\u003eDual rear exit configuration\u003c\/li\u003e\n\u003cli\u003eTwin 4.0 inch Black Pro-Series tips\u003c\/li\u003e\n\u003cli\u003eDesigned for vehicles without the Active Valve exhaust\u003c\/li\u003e\n\u003cli\u003eCorsa Sport sound level: distinct rumble at idle, aggressive sound through the gears, no drone at cruise\u003c\/li\u003e\n\u003cli\u003ePatented RSC Technology for aggressive sound under acceleration and a drone-free cruise\u003c\/li\u003e\n\u003cli\u003eManufacturer-stated airflow increase of +48.35 percent\u003c\/li\u003e\n\u003cli\u003eManufacturer-stated weight reduction of 4 lbs\u003c\/li\u003e\n\u003cli\u003ePremium stainless steel construction\u003c\/li\u003e\n\u003cli\u003eBolt-on installation with no welding required\u003c\/li\u003e\n\u003cli\u003eDesigned, engineered, and manufactured in Berea, Ohio\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePremium Stainless Steel Construction\u003c\/h3\u003e\u003cp\u003eCorsa builds this axle-back from premium stainless steel, a material the company selects for long-term performance, sound, and appearance. The finished system carries twin 4.0 inch Pro-Series tips with a black finish for a darker look at the rear fascia.\u003c\/p\u003e\u003cp\u003eCorsa engineers each exhaust around the specific characteristics of the vehicle it is meant for, with the goal of precise fitment and consistent performance. For this reason, the manufacturer does not support purchase or installation on vehicles other than those it specifies. Every system is designed, engineered, and produced at Corsa's facility in Berea, Ohio.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eThe Sport sound level is tuned for a pronounced rumble when the engine is idling and an aggressive note as the car accelerates through each gear. Corsa's patented RSC Technology targets drone at cruise, so the exhaust stays assertive under load while settling down on the highway. Corsa notes that Sport is its most popular sound level.\u003c\/p\u003e\u003cp\u003eCorsa rates the system at a 48.35 percent increase in airflow and a 4 lb reduction in weight. The company cautions that these figures, like its power numbers, are not assured and may differ from car to car.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBolt-on installation\u003c\/li\u003e\n\u003cli\u003eNo welding required\u003c\/li\u003e\n\u003cli\u003eAll hardware and detailed instructions are supplied with the kit\u003c\/li\u003e\n\u003cli\u003eIntended only for Mustang GT models without the Active Valve exhaust\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAdds a deeper idle rumble and a more aggressive tone under acceleration over the factory non-valved exhaust\u003c\/li\u003e\n\u003cli\u003eRSC Technology is designed to prevent drone during highway cruising, which matters on a daily-driven car\u003c\/li\u003e\n\u003cli\u003eManufacturer-rated gains of +5 horsepower and +4 torque, along with a 4 lb weight reduction\u003c\/li\u003e\n\u003cli\u003eTwin 4.0 inch Black Pro-Series tips give the rear of the car a darker, finished look\u003c\/li\u003e\n\u003cli\u003eInstalls with basic bolt-on work and no welding, with hardware and instructions in the box\u003c\/li\u003e\n\u003cli\u003eBacked by Corsa's Limited Lifetime warranty for as long as you own the vehicle\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2018-2023 Ford Mustang GT (5.0L), Fastback\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e3.0 inch axle-back exhaust system with twin 4.0 inch Black Pro-Series tips\u003c\/li\u003e\n\u003cli\u003eAll installation hardware\u003c\/li\u003e\n\u003cli\u003eDetailed installation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eCorsa Limited Lifetime warranty for as long as you own your vehicle, with proof of purchase required.\u003c\/p\u003e","brand":"Corsa Performance","offers":[{"title":"Default Title","offer_id":68305574985913,"sku":"COR21039BLK","price":1413.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/21039-2018-2019-ford-mustang-gt-5-0l-v8-3-0-axle-back-exhaust-system-with-twin-4-0-tips-21039-sport-sound-level-axle-back-exhaust-polished-sport-dual-rear-twin-4-0in-11205752389718_53ec50f1-27ea-4b95-8ccf-5e8d0ea99a2b.jpg?v=1794430790"},{"product_id":"corsa-21002blk-2018-2023-mustang-gt-3-active-exhaust-axleback-system-with-4-quad-black-tips-touring-sport","title":"Corsa 21002BLK 2018-2023 Mustang GT 3\" Active Exhaust Axleback System with 4\" Quad Black Tips (Touring\/Sport)","description":"\u003cp\u003eThe Corsa Performance 21002BLK is a 3.0-inch active valve axle-back exhaust system for the S550 Mustang GT with the 5.0L V8. It uses a dual rear exit layout with twin 4.0-inch Black Pro-Series tips on each side, and it is built from 304 stainless steel. Corsa places its sound character in the Touring to Sport range: slightly louder than the factory exhaust in Touring mode, quiet at idle, and free of drone at cruise. The system is designed only for cars that came with the factory active valve exhaust.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer-stated gains:\u003c\/strong\u003e Corsa Performance lists gains of +5 horsepower and +4 torque for this system. Corsa states that actual performance results are not guaranteed and may vary.\u003c\/p\u003e\n\u003cp\u003eThe main purpose of this axle-back is to give GT owners a wider, more usable range of exhaust volume without the cabin drone many aftermarket systems bring on the highway. It combines Corsa's patented Reflective Sound Cancellation (RSC) technology with Corsa-built active valves that work through the car's factory solenoids, so quiet start and the stock valve modes keep working. Corsa also notes that this sound level suits cars with aggressive engine modifications where exhaust volume needs to stay under control. It bolts on without welding and is designed, engineered, and manufactured by Corsa in Berea, Ohio.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e3.0-inch axle-back exhaust system\u003c\/li\u003e\n\u003cli\u003eDual rear exit with twin 4.0-inch Black Pro-Series tips per side (four tips total)\u003c\/li\u003e\n\u003cli\u003eTouring to Sport sound level: slightly louder than stock Touring, quiet at idle, no drone during cruise\u003c\/li\u003e\n\u003cli\u003ePatented Reflective Sound Cancellation (RSC) technology with active valve control\u003c\/li\u003e\n\u003cli\u003eCorsa-built active valves that retain the factory solenoids for seamless integration with the Mustang GT valve system\u003c\/li\u003e\n\u003cli\u003eKeeps the factory quiet start function\u003c\/li\u003e\n\u003cli\u003eManufacturer-stated 11 decibel change in volume across the various driving modes\u003c\/li\u003e\n\u003cli\u003eManufacturer-stated flow of 28% better than stock with the valves closed and 17% better with the valves open\u003c\/li\u003e\n\u003cli\u003e304 stainless steel construction\u003c\/li\u003e\n\u003cli\u003eDual-walled tips\u003c\/li\u003e\n\u003cli\u003eFor vehicles with factory active valve exhaust only\u003c\/li\u003e\n\u003cli\u003eBolt-on installation with no welding required\u003c\/li\u003e\n\u003cli\u003eDesigned, engineered, and manufactured in Berea, Ohio, USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e304 Stainless Steel Construction with Corsa-Built Active Valves\u003c\/h3\u003e\u003cp\u003eCorsa builds this axle-back from 304 stainless steel, the material the company relies on for long-term performance, sound, and appearance. The tips are dual-walled Pro-Series units with a black finish. Corsa states that each of its exhaust systems is engineered around the specific properties of the vehicle it is meant for, with the goal of correct fitment and performance on that car.\u003c\/p\u003e\u003cp\u003eThe active valves are Corsa's own design rather than an off-the-shelf part. According to Corsa, development took more than two years, and after evaluating multiple existing valve options, the company built its own valve and put it through heavy heat cycling tests. Corsa reports no failures at well over half a million cycles. The valves retain the factory solenoids so they operate within the Mustang GT's existing valve control system.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eSound control is the core of this system. Corsa's patented RSC technology is tuned to deliver an aggressive tone under acceleration while canceling drone at cruising speeds, and Corsa says the combination of its active valve and RSC is more effective than the factory system at providing a drone-free cruise. The car can still use quiet start for low-volume startups, or run with the valves fully open, and Corsa rates the volume difference across driving modes at 11 decibels.\u003c\/p\u003e\u003cp\u003eIn this Touring to Sport configuration, the exhaust is only slightly louder than the stock system in Touring mode and stays quiet at idle. That makes it a reasonable choice for owners who want more character without a loud daily driver, and Corsa specifically recommends it for engines with aggressive modifications where overall exhaust volume needs to be kept in check.\u003c\/p\u003e\u003cp\u003eOn the flow side, Corsa states this axle-back flows 28% better than stock with the valves closed and 17% better with the valves open. For owners who want more sound and performance, Corsa suggests pairing the axle-back with its Double X-Pipe, part number 14327, which Corsa says outflows the stock mid-section by 23.43%.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBolt-on installation; no welding required\u003c\/li\u003e\n\u003cli\u003eAll hardware is included in the kit\u003c\/li\u003e\n\u003cli\u003eDetailed printed instructions are included, with full-color instructions available online from Corsa\u003c\/li\u003e\n\u003cli\u003eRequires a vehicle equipped with the factory active valve exhaust\u003c\/li\u003e\n\u003cli\u003eCorsa does not recommend or recognize purchase and installation on vehicles other than those the system is designed for\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eYou want more exhaust sound than stock without highway drone, which Corsa addresses with its patented RSC technology\u003c\/li\u003e\n\u003cli\u003eYour GT has the factory active valve exhaust and you want to keep quiet start and the valve modes working through the factory solenoids\u003c\/li\u003e\n\u003cli\u003eYou want a moderate Touring to Sport volume level, or you are running aggressive engine modifications and need to keep exhaust volume under control\u003c\/li\u003e\n\u003cli\u003eYou prefer a bolt-on, no-welding install with hardware and printed instructions included\u003c\/li\u003e\n\u003cli\u003eYou want 304 stainless steel construction backed by a limited lifetime exhaust warranty and a 5-year warranty on the valves\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2018-2023 Ford Mustang GT (5.0L), Fastback\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAll mounting hardware\u003c\/li\u003e\n\u003cli\u003eDetailed printed installation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eCorsa Performance provides a limited lifetime warranty on the exhaust for as long as you own the vehicle, with proof of purchase. The active valves are covered for 5 years.\u003c\/p\u003e","brand":"Corsa Performance","offers":[{"title":"Default Title","offer_id":68305576362169,"sku":"COR21002BLK","price":2135.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/14327-2015-2019-ford-mustang-gt-3-0-double-helixx-x-pipe-14327-x-pipe-744519663632_53f390ab-b052-46ac-8046-28f2964c36cd.jpg?v=1794379152"},{"product_id":"slp-mustang-loud-mouth-axle-back-exhaust","title":"SLP Mustang \"Loud Mouth\" Axle-Back Exhaust","description":"\u003cp\u003eThe SLP Loud Mouth Axle-Back Exhaust is a rear-section exhaust system for the Shelby GT500 that removes the factory mufflers entirely. In their place, it uses mandrel-bent 2.5-inch stainless steel tubing that runs to a pair of hand-polished 3.5-inch dual-wall tips. By eliminating the muffler assembly, the system cuts backpressure at the rear of the exhaust. SLP says this improves power and gives the car a much more aggressive exhaust note than the stock setup.\u003c\/p\u003e\n\u003cp\u003eThis kit is aimed at GT500 owners who think the factory mufflers hold back the car's sound and flow and who want a simple bolt-on change. SLP says it installs in under 30 minutes. It comes with pre-welded hangers, detailed instructions, and the needed installation hardware. It is significantly lighter than the OEM muffler assembly, and SLP states it is emissions legal in all 50 states. Coverage includes the SLP Performance Guarantee and a limited lifetime warranty.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAxle-back design that eliminates the factory mufflers entirely\u003c\/li\u003e\n\u003cli\u003eMandrel-bent 2.5-inch tubing for consistent flow\u003c\/li\u003e\n\u003cli\u003eConstructed entirely from stainless steel\u003c\/li\u003e\n\u003cli\u003eHand-polished 3.5-inch dual-wall tips\u003c\/li\u003e\n\u003cli\u003eSignificantly lighter than the OEM muffler assembly\u003c\/li\u003e\n\u003cli\u003ePre-welded hangers\u003c\/li\u003e\n\u003cli\u003eInstalls in under 30 minutes\u003c\/li\u003e\n\u003cli\u003eEmissions legal in all 50 states, per SLP\u003c\/li\u003e\n\u003cli\u003eBacked by the SLP Performance Guarantee and a limited lifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAll-Stainless Steel, Mandrel-Bent Construction\u003c\/h3\u003e\u003cp\u003eSLP builds the Loud Mouth axle-back entirely from stainless steel, including the tubing and the tips. The 2.5-inch tubing is mandrel bent, which keeps the pipe diameter consistent through each bend. This avoids the crimped, narrowed sections that compression bending can leave behind.\u003c\/p\u003e\u003cp\u003eThe hangers are welded on before the system ships, so there is no fabrication or welding needed during installation. The system finishes in hand-polished 3.5-inch dual-wall tips, which give the rear of the car a clean, show-quality look.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eWith the factory mufflers removed, exhaust gases leave through open mandrel-bent tubing instead of passing through muffler baffling. SLP states that this greatly reduces backpressure and improves power. The manufacturer does not publish specific horsepower or torque figures.\u003c\/p\u003e\u003cp\u003eThe design is built for sound. With no mufflers in the rear section, the GT500 produces a much louder and more aggressive exhaust note than it does with the stock mufflers. Buyers should expect a significant increase in volume.\u003c\/p\u003e\u003cp\u003eSLP also notes that the system is significantly lighter than the OEM muffler assembly, which removes weight from the rear of the car.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSLP states installation takes under 30 minutes\u003c\/li\u003e\n\u003cli\u003eHangers come pre-welded to the system, so no welding is required\u003c\/li\u003e\n\u003cli\u003eDetailed instructions and all necessary installation hardware are included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRemoves the factory mufflers to reduce rear-section backpressure\u003c\/li\u003e\n\u003cli\u003eDelivers a much louder, more aggressive exhaust note than the stock mufflers\u003c\/li\u003e\n\u003cli\u003eMandrel-bent 2.5-inch tubing maintains consistent flow through the bends\u003c\/li\u003e\n\u003cli\u003eAll-stainless construction with hand-polished 3.5-inch dual-wall tips\u003c\/li\u003e\n\u003cli\u003eLighter than the OEM muffler assembly it replaces\u003c\/li\u003e\n\u003cli\u003eQuick bolt-on installation with included hardware and instructions\u003c\/li\u003e\n\u003cli\u003eStated by SLP to be emissions legal in all 50 states\u003c\/li\u003e\n\u003cli\u003eSupported by a limited lifetime warranty and the SLP Performance Guarantee\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2007-2026 Ford Mustang GT500\u003c\/li\u003e\n\u003cli\u003e2007-2026 Ford Mustang GT500\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLoud Mouth axle-back exhaust with pre-welded hangers\u003c\/li\u003e\n\u003cli\u003eDual hand-polished 3.5-inch dual-wall tips\u003c\/li\u003e\n\u003cli\u003eDetailed installation instructions\u003c\/li\u003e\n\u003cli\u003eAll necessary installation hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eCovered by the SLP Performance Guarantee and an SLP limited lifetime warranty.\u003c\/p\u003e","brand":"SLP","offers":[{"title":"Default Title","offer_id":68305688264889,"sku":"SLPM31014","price":449.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/m31014.jpg?v=1794436114"},{"product_id":"borla-axle-back-exhaust-system-s-type-black-chrome-quad-tips-2024-2026-mustang-w-active-exhaust-11985bc","title":"Borla Axle-Back Exhaust System - S-Type - Black Chrome Quad Tips (2024-2026 Mustang w\/ Active Exhaust) - 11985BC","description":"\u003cp\u003eThe Borla 11985BC is an S-Type axle-back exhaust system for the 5.0L Mustang GT equipped with the factory Active Valve Performance Exhaust. It replaces the rear section of the exhaust and uses Borla mufflers with Polyphonic Harmonizer technology, which produce a clean, rich, full-bodied tone at the classic S-Type sound level. The system finishes in quad 4 inch tips with black chrome applied over T-304 stainless steel.\u003c\/p\u003e\n\u003cp\u003eThis system suits owners of current-generation, Active Exhaust-equipped Mustang GT coupes and convertibles who want a more pronounced Borla sound and a darker tip finish. The entire system is built from T-304 stainless steel with mandrel-bent tubing and CNC-controlled manufacturing for accurate fitment. Borla backs it with its Million-Mile Warranty. The same system is also offered with bright chrome on T-304 stainless steel tips or with carbon fiber tips.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDesigned for the 5.0L Mustang GT with Active Valve Performance Exhaust\u003c\/li\u003e\n\u003cli\u003eS-Type sound level\u003c\/li\u003e\n\u003cli\u003eMufflers with Polyphonic Harmonizer technology: patented units with pipes of different diameters and lengths that create multiple exhaust notes which harmonize together\u003c\/li\u003e\n\u003cli\u003eStraight-through, patented multi-core muffler design\u003c\/li\u003e\n\u003cli\u003eQuad 4 inch tips with black chrome over T-304 stainless steel\u003c\/li\u003e\n\u003cli\u003ePremium T-304 stainless steel construction throughout the system\u003c\/li\u003e\n\u003cli\u003eMandrel-bent tubing for smooth, unrestricted flow\u003c\/li\u003e\n\u003cli\u003eCNC (computer numerical control) manufacturing for accurate fit\u003c\/li\u003e\n\u003cli\u003eFits both coupe and convertible models\u003c\/li\u003e\n\u003cli\u003eAlso available with bright chrome on T-304 stainless steel tips or carbon fiber tips\u003c\/li\u003e\n\u003cli\u003eBorla Million-Mile Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eT-304 Stainless Steel Construction with Black Chrome Tips\u003c\/h3\u003e\u003cp\u003eBorla builds this system from premium T-304 stainless steel, a grade the company positions as superior to T-400 series alternatives such as 409 stainless. The material choice is aimed at both performance and long-term durability.\u003c\/p\u003e\u003cp\u003eSmooth mandrel bends keep the tubing diameter consistent through each curve to support flow, and CNC manufacturing provides precise dimensions for an accurate fit on the vehicle.\u003c\/p\u003e\u003cp\u003eThe 4 inch tips use black chrome over a T-304 stainless steel base. Borla advises against using its Stainless Steel Polish (part number 21461) on these black chrome tips. Instead, clean them with hot water and a microfiber cloth.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eSound is the main focus of this axle-back. Polyphonic Harmonizer technology inside the mufflers routes exhaust through patented units with pipes of varying diameters and lengths, producing several exhaust notes that blend into a clean, rich, full-bodied tone. The S-Type tuning delivers Borla's classic sound level.\u003c\/p\u003e\u003cp\u003eThe straight-through, multi-core muffler design is meant to improve exhaust velocity. Borla links this to added power, improved driving feel, and better fuel economy, along with its signature Sound of Power. Borla does not publish specific horsepower, torque, or fuel economy figures for this system.\u003c\/p\u003e\u003cp\u003eThe system is engineered to work with Mustang GT models equipped with the factory Active Valve Performance Exhaust.\u003c\/p\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAdds Borla's S-Type sound to an Active Exhaust-equipped 5.0L Mustang GT, with a fuller and more harmonized tone from the Polyphonic Harmonizer mufflers\u003c\/li\u003e\n\u003cli\u003eBlack chrome 4 inch quad tips give the rear of the car a darker look than bright chrome\u003c\/li\u003e\n\u003cli\u003eT-304 stainless steel construction for long-term durability\u003c\/li\u003e\n\u003cli\u003eMandrel bends and CNC manufacturing support good flow and an accurate fit\u003c\/li\u003e\n\u003cli\u003eCovered by Borla's Million-Mile Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2024 Ford Mustang GT (5.0L), Fastback \u0026amp; Convertible\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eBorla Million-Mile Warranty\u003c\/p\u003e","brand":"Borla","offers":[{"title":"Default Title","offer_id":68305703567545,"sku":"BOR11985BC","price":2017.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/11985BC-main-1-xlarge.jpg?v=1794430580"},{"product_id":"borla-axle-back-exhaust-system-s-type-stainless-steel-tips-2018-2023-mustang-11951","title":"Borla Axle-Back Exhaust System - S-Type - Stainless Steel Tips (2018-2023 Mustang) - 11951","description":"\u003cp\u003eThe Borla S-Type Axle-Back Exhaust System, part number 11951, is a rear-section exhaust upgrade for 2018-2023 Mustang GT and Bullitt models powered by the 5.0L V8. Being an axle-back, it replaces the factory exhaust from the rear axle back. It is engineered specifically for cars equipped with the factory Active Valve Performance Exhaust and is finished with stainless steel tips.\u003c\/p\u003e\n\u003cp\u003eThe S-Type delivers Borla's signature exhaust tone, which the company calls the \"Sound of Power,\" along with a more motorsport-inspired look at the rear of the car. It suits owners of active-exhaust GT and Bullitt Mustangs who want a more aggressive sound and a cleaner appearance without replacing the full exhaust system. Coverage includes both automatic and manual transmission cars in coupe and convertible form.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBorla S-Type axle-back exhaust system, part number 11951\u003c\/li\u003e\n\u003cli\u003eStainless steel exhaust tips (described as polished in the manufacturer listing)\u003c\/li\u003e\n\u003cli\u003eDesigned for 5.0L V8 Mustang GT models, including the Bullitt\u003c\/li\u003e\n\u003cli\u003eCompatible with vehicles equipped with factory Active Exhaust Valves (Active Valve Performance Exhaust)\u003c\/li\u003e\n\u003cli\u003eSuitable for both automatic and manual transmission cars\u003c\/li\u003e\n\u003cli\u003eRear-wheel-drive coupe and convertible applications\u003c\/li\u003e\n\u003cli\u003eProduces Borla's distinctive \"Sound of Power\" exhaust note\u003c\/li\u003e\n\u003cli\u003eMotorsport-inspired styling at the rear of the vehicle\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eStainless Steel Tips and Borla Engineering Heritage\u003c\/h3\u003e\u003cp\u003eThis S-Type axle-back finishes with stainless steel tips, which the manufacturer listing identifies as polished, giving the rear of the Mustang a bright, clean appearance that complements the factory bodywork.\u003c\/p\u003e\u003cp\u003eBorla built its reputation as a specialist in stainless steel performance exhaust. The company originally produced exhaust systems for concours-level classic cars, including Rolls-Royce and Ferrari models, and has since expanded into systems for modern street, off-road, and racing vehicles.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eThe S-Type is tuned to deliver Borla's well-known \"Sound of Power,\" giving the 5.0L V8 a more pronounced voice under acceleration and through each gear change while retaining a refined character.\u003c\/p\u003e\u003cp\u003eBecause this system is built for cars with the factory Active Valve Performance Exhaust, it is intended to work with the Mustang's active exhaust valves rather than requiring owners to give up that feature. Borla also states that its exhaust upgrades contribute to improved power and torque, better fuel economy, and longer engine life, though no specific figures are provided for this part.\u003c\/p\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePurpose-built for 2018-2023 Mustang GT and Bullitt models with the factory active exhaust valve system\u003c\/li\u003e\n\u003cli\u003eGives the 5.0L V8 Borla's characteristic S-Type exhaust tone\u003c\/li\u003e\n\u003cli\u003eStainless steel tips refresh the look of the rear of the car\u003c\/li\u003e\n\u003cli\u003eAxle-back design upgrades sound and appearance without replacing the entire exhaust\u003c\/li\u003e\n\u003cli\u003eWorks with both manual and automatic transmission cars in coupe or convertible body styles\u003c\/li\u003e\n\u003cli\u003eComes from a manufacturer with a long history in stainless steel performance exhaust\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2018-2023 Ford Mustang Bullitt \/ GT (5.0L), Fastback \u0026amp; Convertible\u003c\/li\u003e\u003c\/ul\u003e","brand":"Borla","offers":[{"title":"Default Title","offer_id":68305708089529,"sku":"BOR11951","price":1899.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/11951-main-1-xlarge.jpg?v=1794430580"},{"product_id":"mbrp-s7211304-2018-2023-mustang-gt-pro-series-2-5-axleback-w-quad-polished-4-tips-race-non-active","title":"MBRP S7211304 2018-2023 Mustang GT Pro-Series 2.5\" Axleback w\/ Quad Polished 4\" Tips - Race (Non-Active)","description":"\u003cp\u003eThe MBRP S7211304 is a Pro-Series axle-back exhaust for the 2018-2023 Mustang GT. It is built from T304 stainless steel with 2.5-inch tubing and finishes in four polished 4-inch tips. This is the Race version, and it is designed for non-active cars, meaning Mustang GTs that do not have the factory active exhaust system. It replaces the factory components from the rear axle back, using a bolt-on, no-weld design that mounts to the OEM hangers.\u003c\/p\u003e\n\u003cp\u003ePro-Series is MBRP's top performance exhaust line. The stainless construction is meant to hold up and keep its finish over time, and MBRP developed the system on its in-house chassis dyno and with road and track testing. The aim is to move exhaust out efficiently through mandrel-bent tubing and shallow bend angles. For S550 GT owners who want a new sound and a quad-tip rear look without cutting or welding, it is a straightforward upgrade. MBRP also positions it as a foundation for later intake and tuning modifications.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMBRP Pro-Series axle-back exhaust, part number S7211304\u003c\/li\u003e\n\u003cli\u003eRace version, built for non-active exhaust applications\u003c\/li\u003e\n\u003cli\u003eT304 stainless steel construction\u003c\/li\u003e\n\u003cli\u003e2.5-inch tubing diameter\u003c\/li\u003e\n\u003cli\u003eQuad polished 4-inch exhaust tips with stamped MBRP logo\u003c\/li\u003e\n\u003cli\u003eFully mandrel-bent tubing with minimal bend degree angles\u003c\/li\u003e\n\u003cli\u003eDeveloped on MBRP's in-house Mustang 1100 AWD-SE chassis dynamometer, along with road and track testing\u003c\/li\u003e\n\u003cli\u003eBolt-on, no-weld design that fits directly to the OEM hangers\u003c\/li\u003e\n\u003cli\u003eClamps and installation parts supplied in one box\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eT304 Stainless Steel Pro-Series Construction\u003c\/h3\u003e\u003cp\u003eMBRP builds its Pro-Series line from T304 stainless steel. The company chose this material for durability and for a finish that stays looking good and is easy to clean and maintain. The four 4-inch tips are polished and carry a stamped MBRP logo.\u003c\/p\u003e\u003cp\u003eThe tubing is fully mandrel bent, and MBRP kept the bend angles to a minimum in the routing. MBRP states that its systems are built to tight manufacturing standards. They are also designed to fit directly to the factory hanger locations, which helps the system line up correctly under the car.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eMBRP refined this system through extended sessions on its in-house Mustang 1100 AWD-SE chassis dynamometer and through hundreds of miles of road and track driving. Several revisions were made along the way. The design goal was to maximize exhaust flow and reduce exhaust temperatures. The mandrel-bent 2.5-inch tubing and shallow bends support that goal by helping exhaust exit quickly.\u003c\/p\u003e\u003cp\u003eMBRP tunes its performance systems for sound as well as flow, aiming for a classic muscle car tone. This S7211304 is the Race variant, intended for GTs without the factory active exhaust. MBRP also presents the system as a starting point for owners who plan to add cold air intakes, programmers, modules, or tuners.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBolt-on design that requires no welding\u003c\/li\u003e\n\u003cli\u003eMBRP estimates installation at one and a half to two hours\u003c\/li\u003e\n\u003cli\u003eFits directly to the OEM exhaust hangers\u003c\/li\u003e\n\u003cli\u003eClamps and parts needed for installation are included in the box\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eReplaces the factory axle-back on a non-active 2018-2023 Mustang GT with a T304 stainless steel system\u003c\/li\u003e\n\u003cli\u003eQuad polished 4-inch tips change the rear appearance of the car\u003c\/li\u003e\n\u003cli\u003eMandrel-bent 2.5-inch tubing with minimal bend angles is designed for efficient exhaust flow\u003c\/li\u003e\n\u003cli\u003eBolt-on, no-weld fitment to the OEM hangers lets you install it at home in about one and a half to two hours\u003c\/li\u003e\n\u003cli\u003eServes as a base exhaust upgrade if you plan to add an intake or tuning later\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2018-2023 Ford Mustang GT\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eClamps and installation parts required for the bolt-on install (per manufacturer, supplied in one box)\u003c\/li\u003e\u003c\/ul\u003e","brand":"MBRP Exhaust","offers":[{"title":"Default Title","offer_id":68305810981049,"sku":"MBRPS7211304","price":504.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/unnamed_525fd398-a2ab-4a96-a6d5-7c410fd16d63.webp?v=1794435550"},{"product_id":"borla-axle-back-exhaust-system-s-type-stainless-steel-tips-2018-2023-mustang-11953","title":"Borla Axle-Back Exhaust System - S-Type - Stainless Steel Tips (2018-2023 Mustang) - 11953","description":"\u003cp\u003eThe Borla S-Type Axle-Back Exhaust System, part number 11953, is a rear-section exhaust upgrade for the 2018-2023 Ford Mustang GT with the 5.0L V8. It replaces the factory components from the rear axle back and finishes with polished stainless steel tips. The source specifies it for cars equipped with either the automatic or manual transmission, in rear-wheel-drive coupe and convertible form. It is intended only for cars that do not have the factory Active Valve Performance Exhaust.\u003c\/p\u003e\n\u003cp\u003eBorla markets the S-Type around its signature \"Sound of Power\" exhaust note. The company says its exhaust upgrades bring more power and torque, better fuel economy, longer engine life, and motorsport-inspired styling, but it gives no specific figures for this part. For S550 GT owners with the non-active exhaust, an axle-back like this changes the car's sound and rear appearance without replacing the entire exhaust system.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBorla S-Type axle-back exhaust system, part number 11953\u003c\/li\u003e\n\u003cli\u003ePolished stainless steel exhaust tips\u003c\/li\u003e\n\u003cli\u003eEngineered for the 2018-2023 Mustang GT 5.0L V8\u003c\/li\u003e\n\u003cli\u003eCompatible with automatic and manual transmission cars\u003c\/li\u003e\n\u003cli\u003eFits rear-wheel-drive two-door coupe and convertible body styles\u003c\/li\u003e\n\u003cli\u003eFor vehicles without the factory Active Valve Performance Exhaust\u003c\/li\u003e\n\u003cli\u003eTuned to deliver Borla's \"Sound of Power\" exhaust tone\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePolished Stainless Steel Tips\u003c\/h3\u003e\u003cp\u003eThe 11953 system is finished with polished stainless steel tips, which give the rear of the Mustang GT a clean, bright appearance. Borla has specialized in stainless steel performance exhaust for many years. The company started out building exhaust systems for collectible concours-grade cars such as Rolls-Royce and Ferrari, and it now produces exhaust for street, off-road, and racing vehicles.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eBorla designs the S-Type around the brand's characteristic \"Sound of Power\" tone, which it describes as an engaging note that builds as you open the throttle and move through the gears. Borla also lists more power and torque, improved fuel economy, and longer engine life among the general benefits of its exhaust systems. No specific gains or measurements are published for this part number.\u003c\/p\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eIt gives a 2018-2023 Mustang GT without active exhaust Borla's \"Sound of Power\" character in place of the stock axle-back sound.\u003c\/li\u003e\n\u003cli\u003ePolished stainless steel tips refresh the look of the rear fascia.\u003c\/li\u003e\n\u003cli\u003eAs an axle-back, it targets the rear section of the exhaust, leaving the rest of the factory system in place.\u003c\/li\u003e\n\u003cli\u003eIt works with both automatic and manual transmission GTs in coupe or convertible form.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2018-2023 Ford Mustang GT (5.0L), Fastback \u0026amp; Convertible\u003c\/li\u003e\u003c\/ul\u003e","brand":"Borla","offers":[{"title":"Default Title","offer_id":68305812193465,"sku":"BOR11953","price":1199.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/11953-main-1-xlarge.jpg?v=1794430397"},{"product_id":"corsa-24-ford-mustang-gt-touring-axle-back-dual-rear-exit-with-4-5in-pro-series-polished-tips","title":"Corsa 24+ Ford Mustang GT Touring Axle-Back Dual Rear Exit with 4.5in Pro Series Polished Tips","description":"\u003cp\u003eThe Corsa Performance Touring Axle-Back is a 3.0 in. exhaust system developed for the seventh-generation S650 Mustang GT and its Coyote V8. It is built from 304 stainless steel and uses custom-tuned, straight-through mufflers engineered specifically for this platform. The system exits through dual rear outlets finished with 4.5 in. Pro Series polished tips.\u003c\/p\u003e\n\u003cp\u003eCorsa designed the Touring system to bolt directly to the factory resonated mid-pipe. It gives the stock exhaust a distinctly different tone and improves flow, which helps the car get more out of other performance modifications. For S650 GT owners who want a measured change in sound and better exhaust flow without replacing the mid-pipe, this American-made axle-back is a direct way to get there. It is engineered and manufactured in Berea, Ohio.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e3.0 in. axle-back exhaust system\u003c\/li\u003e\n\u003cli\u003e304 stainless steel construction\u003c\/li\u003e\n\u003cli\u003eCustom-tuned mufflers engineered for the 7th Generation Mustang Coyote V8\u003c\/li\u003e\n\u003cli\u003eStraight-through muffler design\u003c\/li\u003e\n\u003cli\u003eManufacturer-stated 46% increase in flow\u003c\/li\u003e\n\u003cli\u003eTouring sound level, tuned to give the stock exhaust a distinctly different tone\u003c\/li\u003e\n\u003cli\u003eBolts directly to the stock resonated mid-pipe\u003c\/li\u003e\n\u003cli\u003eDual rear exit configuration\u003c\/li\u003e\n\u003cli\u003e4.5 in. Pro Series polished tips\u003c\/li\u003e\n\u003cli\u003eEngineered and made in Berea, OH\u003c\/li\u003e\n\u003cli\u003eBacked by a Corsa Lifetime Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e304 Stainless Steel Construction, Made in Berea, Ohio\u003c\/h3\u003e\u003cp\u003eThe Touring axle-back uses 304 stainless steel throughout. Corsa paired that construction with mufflers it tuned specifically for the Coyote V8 in the seventh-generation Mustang, rather than adapting a generic design.\u003c\/p\u003e\u003cp\u003eCorsa Performance engineers and builds its exhaust systems in Berea, Ohio, and covers them with a Lifetime Warranty.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eEach muffler uses a straight-through design, and Corsa states the system increases flow by 46%. According to the manufacturer, this added flow lets drivers get more out of any other performance modifications on the car.\u003c\/p\u003e\u003cp\u003eThe Touring system keeps the factory resonated mid-pipe in place. It is tuned to give the stock exhaust a distinctly different tone, and the dual 4.5 in. Pro Series polished tips finish the rear of the car.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eBolts directly to the stock resonated mid-pipe\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eChanges the sound of the S650 GT's exhaust while keeping the factory resonated mid-pipe\u003c\/li\u003e\n\u003cli\u003eStraight-through mufflers and a stated 46% flow increase support other performance upgrades\u003c\/li\u003e\n\u003cli\u003eMufflers tuned specifically for the 7th Generation Coyote V8\u003c\/li\u003e\n\u003cli\u003e304 stainless steel construction\u003c\/li\u003e\n\u003cli\u003eDual 4.5 in. Pro Series polished tips for a finished rear appearance\u003c\/li\u003e\n\u003cli\u003eBuilt in Berea, OH and covered by a Lifetime Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2024 Ford Mustang GT\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eLifetime Warranty from Corsa Performance\u003c\/p\u003e","brand":"Corsa Performance","offers":[{"title":"Default Title","offer_id":68305816092857,"sku":"COR21256","price":1499.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/21252_a_lowres_811dfe4e-1b12-4aab-87a2-1bd6ba97b6de.jpg?v=1794430798"},{"product_id":"mbrp-2-5in-axle-back-dual-rear-exit-quad-tips-al-2026-mustang-gt-mustang-gt-premium-s7281al","title":"MBRP 2.5In Axle-Back Dual Rear Exit Quad Tips. Al (2026 Mustang GT, Mustang GT Premium) - S7281AL","description":"\u003cp\u003eThe MBRP S7281AL is an axle-back exhaust from the company's Armor Lite Series for the 2026 Mustang GT. It uses 2.5-inch heavy-gauge aluminized steel tubing, mandrel bent throughout, and finishes in a dual rear exit layout with quad tips. The design replaces the factory exhaust valves and includes brackets for the valve actuators. MBRP describes the result as an aggressive exhaust tone with a traditional muscle car character.\u003c\/p\u003e\n\u003cp\u003eMBRP positions Armor Lite as its value line. According to the manufacturer, it keeps the same fitment, performance, and sound as MBRP's premium systems, with aluminized steel used in place of more costly materials. It suits owners of the new S650-generation GT who want a deeper, more assertive rear-exit sound from a recognized exhaust brand on a tighter budget. It also makes particular sense for drivers in dry climates, where aluminized steel holds up well.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eArmor Lite Series axle-back exhaust, MBRP part number S7281AL\u003c\/li\u003e\n\u003cli\u003e2.5-inch tubing diameter\u003c\/li\u003e\n\u003cli\u003eHeavy-gauge aluminized steel construction\u003c\/li\u003e\n\u003cli\u003eFully mandrel bent tubing with no rippling in the bends\u003c\/li\u003e\n\u003cli\u003eDual rear exit configuration with quad tips\u003c\/li\u003e\n\u003cli\u003eValve delete design\u003c\/li\u003e\n\u003cli\u003eValve actuator brackets included\u003c\/li\u003e\n\u003cli\u003eVehicle-specific muffler design with minimal bend angles, per MBRP\u003c\/li\u003e\n\u003cli\u003eMBRP logo stamped on the tips\u003c\/li\u003e\n\u003cli\u003eDeveloped on MBRP's in-house Mustang 1100 AWD-SE chassis dynamometer and tested on road and track\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHeavy-Gauge Aluminized Steel Construction\u003c\/h3\u003e\u003cp\u003eThe S7281AL is built from heavy-gauge aluminized steel tubing. The thicker wall helps it resist the dings and dents that road debris can cause underneath the car. MBRP recommends aluminized steel especially for drivers in dry regions with little precipitation, where corrosion exposure is lower.\u003c\/p\u003e\u003cp\u003eEvery section of tubing is mandrel bent. This process keeps the full internal diameter through each bend and avoids the rippling and wall collapse that crush bending can produce. MBRP pairs the bends with minimal bend angles and a muffler designed for this specific vehicle.\u003c\/p\u003e\u003cp\u003eMBRP reports that the system was refined over extended sessions on its in-house Mustang 1100 AWD-SE chassis dynamometer. It was also driven for hundreds of miles on road and track, with design revisions made along the way.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eMBRP describes the sound as aggressive, aiming for a real muscle car tone. The company says each of its systems is specifically tuned for the vehicle it fits. The valve delete design removes the factory valve function from the axle-back section, and MBRP supplies brackets for the valve actuators.\u003c\/p\u003e\u003cp\u003eThe smooth mandrel-bent tubing is intended to move exhaust gas out quickly with minimal restriction. MBRP states that better exhaust flow lets more fresh air into the cylinders, supporting power, performance, and engine longevity. The company does not publish specific horsepower or torque figures for this part.\u003c\/p\u003e\u003cp\u003eMBRP also presents its exhaust systems as a foundation for other bolt-on upgrades, including cold air intakes, programmers, and tuning modules.\u003c\/p\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDelivers a more aggressive, muscle car exhaust tone than the factory system on the 2026 Mustang GT\u003c\/li\u003e\n\u003cli\u003eUses MBRP's value-oriented Armor Lite construction while, per the manufacturer, matching the fitment, performance, and sound of its premium lines\u003c\/li\u003e\n\u003cli\u003eHeavy-gauge aluminized steel resists damage from road debris and is well suited to dry climates\u003c\/li\u003e\n\u003cli\u003eFully mandrel-bent 2.5-inch tubing maintains consistent flow through every bend\u003c\/li\u003e\n\u003cli\u003eDual rear exit with quad tips and stamped MBRP logos gives a finished look at the rear of the car\u003c\/li\u003e\n\u003cli\u003eCan serve as a starting point for additional bolt-on modifications such as intakes and tuners\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2026 Ford Mustang GT\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eValve actuator brackets\u003c\/li\u003e\u003c\/ul\u003e","brand":"MBRP Exhaust","offers":[{"title":"Default Title","offer_id":68305817108665,"sku":"MBRPS7281AL","price":449.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/unnamed_7188c283-75ab-4ec0-a2ab-d0b60e7ca52b.webp?v=1794435552"},{"product_id":"corsa-performance-14326blk-3-sport-axle-back-with-4-5-black-tips-2015-2017-5-0l-mustang-gt","title":"Corsa Performance 14326BLK 3\" Sport Axle Back with 4.5\" Black Tips (2015-2017 5.0L Mustang GT)","description":"\u003cp\u003eThe Corsa Performance 14326BLK is a 3.0 inch Sport axle-back exhaust system engineered for the 2015-2017 Ford Mustang GT with the 5.0L V8. It uses a dual rear exit layout, with each side finished in a single 4.5 inch black Pro-Series tip. It replaces the factory exhaust from the axle rearward, so it changes the car's sound and rear-end appearance without disturbing the rest of the exhaust.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer-stated gains:\u003c\/strong\u003e Corsa states gains of +4 horsepower and +1 torque for this system, along with a 45.99% increase in airflow. Corsa notes that actual performance results are not guaranteed and may vary. No dyno conditions or test details are provided.\u003c\/p\u003e\n\u003cp\u003eThe system is tuned to Corsa's Sport sound level, which the manufacturer describes as its most popular. It pairs a distinct rumble at idle and an aggressive tone through the gears with Corsa's patented RSC Technology, which is designed to eliminate drone at cruise. Construction is premium stainless steel, installation is bolt-on with no welding, and the system is designed, engineered, and manufactured in Berea, Ohio. It suits S550 GT owners who want a stronger V8 voice that stays livable on the highway.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e3.0 inch axle-back exhaust system\u003c\/li\u003e\n\u003cli\u003eDual rear exit configuration\u003c\/li\u003e\n\u003cli\u003eSingle 4.5 inch black Pro-Series tip on each side\u003c\/li\u003e\n\u003cli\u003eSport sound level, described by Corsa as its most popular\u003c\/li\u003e\n\u003cli\u003eDistinct rumble at idle and aggressive sound through the gears\u003c\/li\u003e\n\u003cli\u003eNo drone during cruise\u003c\/li\u003e\n\u003cli\u003eCorsa's patented RSC Technology for an aggressive sound under acceleration and a drone-free cruise\u003c\/li\u003e\n\u003cli\u003eManufacturer-stated gains of +4 horsepower and +1 torque, plus 45.99% increased airflow (results may vary)\u003c\/li\u003e\n\u003cli\u003eStated weight reduction of 4 lbs\u003c\/li\u003e\n\u003cli\u003ePremium stainless steel construction\u003c\/li\u003e\n\u003cli\u003eBolt-on installation with no welding required\u003c\/li\u003e\n\u003cli\u003eDesigned, engineered, and manufactured in Berea, OH\u003c\/li\u003e\n\u003cli\u003eEngineered specifically for the 2015-2017 Mustang GT 5.0L\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePremium Stainless Steel Construction\u003c\/h3\u003e\u003cp\u003eCorsa builds its exhaust systems from premium stainless steel so that performance, sound, and appearance hold up over time. On this axle-back, the stainless construction is finished with black Pro-Series tips, which give the rear of the car a darker look than polished tips.\u003c\/p\u003e\u003cp\u003eCorsa engineers each system around the specific properties of the vehicle it is built for, with the goal of precise fitment and consistent performance. The company designs, engineers, and manufactures the system in Berea, Ohio. Because it is tailored to the 2015-2017 Mustang GT 5.0L, Corsa does not recommend or recognize installation on any vehicle other than the ones specified.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eThe Sport sound level gives the 5.0L V8 a distinct rumble at idle and an aggressive tone as you work through the gears. Corsa's patented RSC Technology is designed to keep that aggressive sound under acceleration while preventing drone at cruising speeds. Corsa states that each system is engineered specifically for its vehicle to achieve drone-free cruising.\u003c\/p\u003e\u003cp\u003eCorsa rates this system at a 45.99% increase in airflow and a 4 lb weight reduction, with stated gains of +4 horsepower and +1 torque. The manufacturer notes that actual results are not guaranteed and may vary.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBolt-on installation\u003c\/li\u003e\n\u003cli\u003eNo welding required\u003c\/li\u003e\n\u003cli\u003eAll hardware and detailed instructions are included in the kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDelivers a stronger V8 rumble at idle and an aggressive tone under acceleration without drone at highway cruise\u003c\/li\u003e\n\u003cli\u003ePatented RSC Technology targets the cruise drone that often makes aftermarket exhausts tiresome on long drives\u003c\/li\u003e\n\u003cli\u003eStainless steel construction is built for lasting performance, sound, and appearance\u003c\/li\u003e\n\u003cli\u003eBlack Pro-Series 4.5 inch tips change the rear-end look of the Mustang GT\u003c\/li\u003e\n\u003cli\u003eBolt-on design with no welding, plus included hardware and instructions, suits owners who do their own work\u003c\/li\u003e\n\u003cli\u003eBacked by Corsa's Limited Lifetime warranty for as long as you own the vehicle\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2015-2017 Ford Mustang GT (5.0L), Fastback\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCorsa 3.0 inch Sport axle-back exhaust system with 4.5 inch black Pro-Series tips\u003c\/li\u003e\n\u003cli\u003eAll installation hardware\u003c\/li\u003e\n\u003cli\u003eDetailed installation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eCorsa branded exhaust systems carry a Limited Lifetime warranty for as long as you own your vehicle, with proof of purchase.\u003c\/p\u003e","brand":"Corsa Performance","offers":[{"title":"Default Title","offer_id":68305829331129,"sku":"COR14326BLK","price":1399.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/14326-2015-2017-ford-mustang-gt-5-0l-v8-3-0-axle-back-with-single-4-5-tips-14326-sport-sound-level-axle-back-exhaust-polished-sport-dual-rear-single-4-5in-744368996368_48e24848-6a6c-4a9c-b031-fc13d0da60b8.jpg?v=1794430801"},{"product_id":"corsa-2015-2017-ford-mustang-gt-5-0-3in-axle-back-exhaust-black-single-tip-touring","title":"Corsa 2015-2017 Ford Mustang GT 5.0 3in Axle Back Exhaust Black Single Tip (Touring)","description":"\u003cp\u003eThe Corsa Performance Touring axle-back exhaust is a 3-inch system built for the 2015-2017 Ford Mustang GT with the 5.0L V8. It replaces the factory components behind the rear axle and finishes with black single tips, giving the S550 a more purposeful look at the rear bumper along with a stronger exhaust note.\u003c\/p\u003e\n\u003cp\u003eCorsa built this system around its patented Reflective Sound Cancellation (RSC) technology, which lets its acoustic engineers shape the sound to suit the car while eliminating drone. The Touring version is meant for owners who want a distinctly stronger voice under hard throttle without paying for it with cabin resonance on long highway drives. Corsa also states that the system is engineered to improve performance, and that choosing a particular sound level does not change those gains.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAxle-back exhaust layout for the 2015-2017 Mustang GT 5.0L\u003c\/li\u003e\n\u003cli\u003e3-inch system\u003c\/li\u003e\n\u003cli\u003eBlack single tip finish\u003c\/li\u003e\n\u003cli\u003eTouring sound level\u003c\/li\u003e\n\u003cli\u003eCorsa patented Reflective Sound Cancellation (RSC) technology\u003c\/li\u003e\n\u003cli\u003eEngineered by Corsa acoustic engineers to remove drone\u003c\/li\u003e\n\u003cli\u003eStronger exhaust note under acceleration with a drone-free cabin while cruising\u003c\/li\u003e\n\u003cli\u003eCorsa states performance gains are the same regardless of sound level chosen\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eReflective Sound Cancellation Engineering\u003c\/h3\u003e\u003cp\u003eCorsa's patented Reflective Sound Cancellation (RSC) technology is the core of this axle-back. Instead of treating drone as an unavoidable side effect of a louder exhaust, RSC gives Corsa's acoustic engineers a way to cancel the resonant frequencies that cause it, while still tuning the overall character of the sound to match the vehicle.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eWith the Touring sound level, the 5.0L V8 takes on a noticeably more assertive tone when you open the throttle, then settles down at steady cruising speeds so the cabin stays free of drone. That balance makes it a practical choice for a Mustang GT that gets driven on the highway as often as it gets driven hard.\u003c\/p\u003e\u003cp\u003eCorsa states that each of its systems is designed to increase vehicle performance, and that those gains are not affected by which sound level you pick. The Touring option lets you choose a sound character without trading away any performance benefit Corsa engineered into the system.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eCorsa provides installation instructions and a technical bulletin for this system; review both before beginning the installation.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eYou want a stronger V8 exhaust note from your 2015-2017 Mustang GT without drone during highway cruising.\u003c\/li\u003e\n\u003cli\u003eCorsa's patented RSC technology targets drone directly, which matters on a car used for daily driving or road trips.\u003c\/li\u003e\n\u003cli\u003eThe Touring sound level suits drivers who prefer a more measured voice over the loudest option available.\u003c\/li\u003e\n\u003cli\u003eCorsa states its performance gains do not depend on sound level, so choosing Touring does not cost you any of the engineered benefit.\u003c\/li\u003e\n\u003cli\u003eBlack single tips give the rear of the car a darker, cleaner appearance than the factory finish.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2015-2017 Ford Mustang GT (5.0L)\u003c\/li\u003e\u003c\/ul\u003e","brand":"Corsa Performance","offers":[{"title":"Default Title","offer_id":68305832607929,"sku":"COR14329BLK","price":1671.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/14326-2015-2017-ford-mustang-gt-5-0l-v8-3-0-axle-back-with-single-4-5-tips-14326-sport-sound-level-axle-back-exhaust-polished-sport-dual-rear-single-4-5in-744368996368_de6456f4-c4f7-472a-bf22-5b860a9af962.jpg?v=1794430803"},{"product_id":"corsa-3-0-inch-axle-back-sport-dual-exhaust-polished-4-5-inch-tips-15-17-mustang-gt-fastback-5-0l-stainless-steel-14326","title":"Corsa 3.0 Inch Axle-Back Sport Dual Exhaust Polished 4.5 Inch Tips 15-17 Mustang GT Fastback 5.0L Stainless Steel - 14326","description":"\u003cp\u003eThe Corsa Performance 14326 is a 3.0 inch Sport axle-back exhaust system for the 2015-2017 Mustang GT Fastback with the 5.0L V8. It uses a dual rear exit layout with a single 4.5 inch polished Pro-Series tip on each side and replaces the factory exhaust from the axle rearward. Corsa builds the system from premium stainless steel and engineers it for this specific vehicle to achieve proper fitment and performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer-stated gains:\u003c\/strong\u003e Corsa states gains of +4 horsepower and +1 torque for this system. The manufacturer notes that actual performance results are not guaranteed and may vary.\u003c\/p\u003e\n\u003cp\u003eThis system uses Corsa's Sport sound level, which the manufacturer describes as its most popular. It gives the Coyote V8 a high-performance tone with a distinct rumble at idle and an aggressive note through the gears. Corsa's patented RSC Technology is designed to keep the cabin free of drone at cruising speed. The system bolts on without welding, and Corsa backs it with a Limited Lifetime warranty. That makes it a practical choice for S550 GT owners who want more sound without living with highway drone.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e3.0 inch axle-back exhaust system\u003c\/li\u003e\n\u003cli\u003eDual rear exit configuration\u003c\/li\u003e\n\u003cli\u003eSingle 4.5 inch polished Pro-Series tip on each side\u003c\/li\u003e\n\u003cli\u003eSport sound level: high-performance sound, distinct rumble at idle, aggressive tone through the gears\u003c\/li\u003e\n\u003cli\u003eNo drone during cruise, per Corsa\u003c\/li\u003e\n\u003cli\u003eCorsa's patented RSC Technology for aggressive sound under acceleration and a drone-free cruise\u003c\/li\u003e\n\u003cli\u003eManufacturer-stated increased air flow of +45.99%\u003c\/li\u003e\n\u003cli\u003eManufacturer-stated weight reduction of 4 lbs\u003c\/li\u003e\n\u003cli\u003ePremium stainless steel construction\u003c\/li\u003e\n\u003cli\u003eEngineered specifically for the vehicle it is designed for\u003c\/li\u003e\n\u003cli\u003eBolt-on installation with no welding required\u003c\/li\u003e\n\u003cli\u003eDesigned, engineered, and manufactured in Berea, Ohio\u003c\/li\u003e\n\u003cli\u003eCorsa part number 14326\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePremium Stainless Steel Construction\u003c\/h3\u003e\u003cp\u003eCorsa builds its exhaust systems from premium stainless steel, chosen to preserve performance, sound, and appearance over the long term. This axle-back is finished with 4.5 inch polished Pro-Series tips that fill out the rear exit openings.\u003c\/p\u003e\u003cp\u003eCorsa engineers each system around the specific properties of the vehicle it is intended for, with the goal of accurate fitment and consistent performance. The company designs, engineers, and manufactures the system in Berea, Ohio. Corsa does not recommend or recognize purchase or installation on vehicles other than those specified.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eThe Sport sound level gives the 5.0L V8 a distinct rumble at idle and an aggressive tone as you work through the gears. Corsa's patented RSC Technology is designed to deliver that aggressive sound under acceleration while keeping the cabin drone-free at cruise. Each system is tuned for its specific vehicle to avoid drone while cruising.\u003c\/p\u003e\u003cp\u003eCorsa rates this system at a 45.99 percent increase in air flow and a 4 lb weight reduction. The manufacturer's stated output gains are +4 horsepower and +1 torque. Corsa notes that actual results are not guaranteed and may vary.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBolt-on installation\u003c\/li\u003e\n\u003cli\u003eNo welding required\u003c\/li\u003e\n\u003cli\u003eAll hardware and detailed instructions are included in the kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eGives the 5.0L V8 a deeper idle rumble and a more aggressive tone under acceleration than the factory axle-back\u003c\/li\u003e\n\u003cli\u003eDesigned to stay drone-free at cruising speed, so long highway drives remain comfortable\u003c\/li\u003e\n\u003cli\u003eBolts on without welding, with all hardware and instructions in the kit\u003c\/li\u003e\n\u003cli\u003ePremium stainless steel construction and polished 4.5 inch Pro-Series tips for long-term durability and appearance\u003c\/li\u003e\n\u003cli\u003eCovered by Corsa's Limited Lifetime warranty for as long as you own the vehicle\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2015-2017 Ford Mustang GT (5.0L), Fastback\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e3.0 inch axle-back exhaust system with dual rear exit and 4.5 inch polished Pro-Series tips\u003c\/li\u003e\n\u003cli\u003eAll installation hardware\u003c\/li\u003e\n\u003cli\u003eDetailed installation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eCorsa Limited Lifetime warranty, valid for as long as you own the vehicle, with proof of purchase.\u003c\/p\u003e","brand":"Corsa Performance","offers":[{"title":"Default Title","offer_id":68305990582457,"sku":"COR14326","price":1407.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/14326-2015-2017-ford-mustang-gt-5-0l-v8-3-0-axle-back-with-single-4-5-tips-14326-sport-sound-level-axle-back-exhaust-polished-sport-dual-rear-single-4-5in-744368996368.jpg?v=1794380096"},{"product_id":"mbrp-2-5in-axle-back-dual-rear-exit-quad-tips-blk-2026-mustang-gt-mustang-gt-premium-s7281blk","title":"MBRP 2.5In Axle-Back Dual Rear Exit Quad Tips. Blk (2026 Mustang GT, Mustang GT Premium) - S7281BLK","description":"\u003cp\u003eThe MBRP S7281BLK is a 2.5 in. axle-back exhaust from the ARMOR BLK Series, built for the 2026 Mustang GT. It uses a dual rear exit layout finished with four tips. The system is made from heavy-gauge aluminized steel, and the tailpipes and tips carry a high-heat black powder coat. MBRP says ARMOR BLK systems perform the same as its other series. The difference is the darker finish at the rear of the car.\u003c\/p\u003e\n\u003cp\u003eThis system suits owners who want a more aggressive exhaust note and a blacked-out rear end without changing anything upstream of the axle. The tubing is mandrel bent throughout, and the design deletes the valve. MBRP includes valve actuator brackets in the box. MBRP also positions its exhaust systems as a starting point for other bolt-on upgrades such as cold air intakes and engine tuning.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eARMOR BLK Series axle-back exhaust, part number S7281BLK\u003c\/li\u003e\n\u003cli\u003e2.5 in. tubing diameter\u003c\/li\u003e\n\u003cli\u003eDual rear exit configuration with quad tips\u003c\/li\u003e\n\u003cli\u003eHeavy-gauge aluminized steel tubing throughout the system\u003c\/li\u003e\n\u003cli\u003eHigh-heat black powder coating on the tailpipes and tips\u003c\/li\u003e\n\u003cli\u003eMill-finish steel on components other than the tailpipes and tips, intended to better resist damage under the vehicle\u003c\/li\u003e\n\u003cli\u003eMandrel-bent tubing with no rippling in the bends\u003c\/li\u003e\n\u003cli\u003eValve delete design\u003c\/li\u003e\n\u003cli\u003eValve actuator brackets included\u003c\/li\u003e\n\u003cli\u003eVehicle-specific muffler design with minimal bend angles, according to MBRP\u003c\/li\u003e\n\u003cli\u003eStamped MBRP logo on the tips\u003c\/li\u003e\n\u003cli\u003eAggressive tone that MBRP describes as a classic muscle car sound\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHeavy-Gauge Aluminized Steel with Black Powder-Coated Tips\u003c\/h3\u003e\u003cp\u003eThe system is built from heavy-gauge aluminized steel tubing from end to end. Only the tailpipes and tips get the high-heat black powder coat. MBRP leaves the rest of the system in a mill finish, which it says holds up better against damage from underneath the car. MBRP notes that aluminized steel is a good fit for drivers in dry climates with little rain or snow.\u003c\/p\u003e\u003cp\u003eEvery bend is mandrel formed, so the tubing keeps a consistent shape without the rippling that compression bending can leave. MBRP says it develops its systems on an in-house chassis dynamometer and refines them through on-road and on-track testing, with adjustments made along the way.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eMandrel-bent tubing, minimal bend angles and a muffler designed for the vehicle are all meant to move exhaust gas out quickly. MBRP says this design helps lower exhaust temperatures and supports better engine breathing. The manufacturer does not publish specific horsepower or torque figures for this part.\u003c\/p\u003e\u003cp\u003eOn sound, MBRP tunes each system for the vehicle it fits. For this axle-back, the company describes an aggressive tone in the spirit of a traditional muscle car. The valve delete design removes the factory valve function from the rear section.\u003c\/p\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSwaps the rear exhaust section for a more aggressive tone without changing components further forward\u003c\/li\u003e\n\u003cli\u003eThe black powder-coated tailpipes and quad tips change the look of the rear of the car\u003c\/li\u003e\n\u003cli\u003eMandrel-bent 2.5 in. tubing keeps flow smooth through every bend\u003c\/li\u003e\n\u003cli\u003eMill-finish aluminized steel under the car is meant to resist damage, a good choice for drivers in dry climates\u003c\/li\u003e\n\u003cli\u003eA solid base for later bolt-on upgrades such as intakes and engine tuning\u003c\/li\u003e\n\u003cli\u003eSeparate warranty coverage applies to the powder coating and to the rest of the system\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2026 Ford Mustang GT\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eValve actuator brackets\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eMBRP covers the black powder coating for 1 year against factory defects. The remaining parts carry a 3-year warranty.\u003c\/p\u003e","brand":"MBRP Exhaust","offers":[{"title":"Default Title","offer_id":68305992843449,"sku":"MBRPS7281BLK","price":574.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/unnamed_d00f2b36-c7cc-40fd-865c-971eb34b1ce1.webp?v=1794435561"},{"product_id":"borla-axle-back-exhaust-system-atak-r-stainless-steel-tips-2015-2017-mustang-11895","title":"Borla Axle-Back Exhaust System - Atak(R) - Stainless Steel Tips (2015-2017 Mustang) - 11895","description":"\u003cp\u003eThe Borla ATAK axle-back exhaust system, part number 11895, is built for the 2015-2017 Ford Mustang GT with the 5.0L V8. It replaces the factory exhaust from the rear axle back and finishes with stainless steel tips, giving the S550 GT a more assertive rear appearance along with Borla's signature exhaust note. Borla lists the system for both automatic and manual transmission cars in rear-wheel-drive, two-door form.\u003c\/p\u003e\n\u003cp\u003eFor owners who want to change how their Coyote-powered Mustang sounds and looks without replacing the entire exhaust, an axle-back is a direct way to do it. Borla is a long-established name in stainless steel performance exhaust, and the ATAK system carries its well-known Sound of Power character. That makes it a strong fit for enthusiasts who want a recognized brand and a clear change in exhaust tone on their 2015-2017 Mustang GT.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBorla ATAK axle-back exhaust system, part number 11895\u003c\/li\u003e\n\u003cli\u003eDesigned for the 2015-2017 Ford Mustang GT with the 5.0L engine\u003c\/li\u003e\n\u003cli\u003eListed for automatic and manual transmission, rear-wheel-drive, two-door models\u003c\/li\u003e\n\u003cli\u003eFinished with polished stainless steel exhaust tips\u003c\/li\u003e\n\u003cli\u003eDelivers Borla's signature Sound of Power exhaust note\u003c\/li\u003e\n\u003cli\u003eProduced by Borla Performance Industries, a specialist in stainless steel performance exhaust\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePolished Stainless Steel Tips from a Stainless Exhaust Specialist\u003c\/h3\u003e\u003cp\u003eThe ATAK axle-back finishes with polished stainless steel tips, which give the rear of the Mustang GT a clean, bright look that suits the S550 rear fascia.\u003c\/p\u003e\u003cp\u003eBorla Performance Industries is known for designing and manufacturing stainless steel performance exhaust. The company's early work was exhaust for concours-level classics such as Rolls-Royce and Ferrari, and it has since expanded into systems for modern performance vehicles used on the street, off-road, and in racing.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eThe main reason to choose this system is sound. Borla describes its exhaust character as the Sound of Power, and the ATAK axle-back brings that tone to the 5.0L Mustang GT for a stronger presence under throttle and through each shift.\u003c\/p\u003e\u003cp\u003eBorla also states in general terms that its exhaust systems can improve power, torque, and fuel economy. No specific figures or test conditions are given for this part.\u003c\/p\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eChanges the exhaust note of a 2015-2017 Mustang GT 5.0L to Borla's signature sound\u003c\/li\u003e\n\u003cli\u003ePolished stainless steel tips update the rear appearance of the car\u003c\/li\u003e\n\u003cli\u003eAxle-back design lets you upgrade the rear section of the exhaust without replacing the full system\u003c\/li\u003e\n\u003cli\u003eListed for both automatic and manual transmission GT models\u003c\/li\u003e\n\u003cli\u003eComes from a manufacturer with a long history in stainless steel performance exhaust\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2015-2017 Ford Mustang GT (5.0L), Convertible\u003c\/li\u003e\u003c\/ul\u003e","brand":"Borla","offers":[{"title":"Default Title","offer_id":68305997824185,"sku":"BOR11895","price":1049.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/11895-main-1-xlarge.jpg?v=1794430415"},{"product_id":"borla-axle-back-exhaust-system-s-type-stainless-steel-tips-2015-2017-mustang-11887","title":"Borla Axle-Back Exhaust System - S-Type - Stainless Steel Tips (2015-2017 Mustang) - 11887","description":"\u003cp\u003eThe Borla S-Type Axle-Back Exhaust System, part number 11887, is a rear-section exhaust upgrade for the 2015-2017 Ford Mustang GT with the 5.0L V8. As an axle-back design, it replaces the factory exhaust components from the rear axle back, which is where the mufflers and tips that define the car's rear-exit sound and appearance are located. This system finishes in stainless steel tips, which the listing describes as polished.\u003c\/p\u003e\n\u003cp\u003eBorla is known for building stainless steel performance exhaust and markets its systems around a signature exhaust tone it calls the Sound of Power. For S550 GT owners who want a more assertive exhaust note and an updated rear appearance without replacing the full exhaust, the S-Type axle-back is a focused upgrade aimed at the section of the system you hear and see most. The manufacturer lists it for both automatic and manual transmission, rear-wheel-drive, two-door GT models.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBorla S-Type axle-back exhaust system, part number 11887\u003c\/li\u003e\n\u003cli\u003eAxle-back configuration that replaces the exhaust from the rear axle rearward\u003c\/li\u003e\n\u003cli\u003eStainless steel exhaust tips, described in the listing as polished\u003c\/li\u003e\n\u003cli\u003eDesigned for the 2015-2017 Mustang GT with the 5.0L engine\u003c\/li\u003e\n\u003cli\u003eListed for both automatic and manual transmission models\u003c\/li\u003e\n\u003cli\u003eListed for rear-wheel-drive, two-door body configurations, including the GT Convertible\u003c\/li\u003e\n\u003cli\u003eTuned to deliver the Borla Sound of Power exhaust character\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBorla Stainless Steel Exhaust Engineering\u003c\/h3\u003e\u003cp\u003eBorla describes itself as a pioneer and leader in designing and manufacturing stainless steel performance exhaust. The company traces its origins to producing exhaust systems for concours-level classics such as Rolls-Royce and Ferrari, and has since moved into exhaust for modern street, off-road, and racing vehicles.\u003c\/p\u003e\u003cp\u003eOn the S-Type axle-back for the Mustang GT, the visible finish comes from stainless steel tips, which the listing identifies as polished, giving the rear of the car a clean, refined look.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eThe S-Type system is built to deliver the exhaust tone Borla calls the Sound of Power, the brand's signature sound. Because an axle-back replaces the mufflers and tips at the very end of the system, it directly changes the volume and character of the exhaust note heard from the driver's seat and behind the car.\u003c\/p\u003e\u003cp\u003eBorla states in general terms that its exhaust upgrades provide a boost in power and torque, but no specific figures are published for this axle-back system.\u003c\/p\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eReplaces the factory rear exhaust section on the 2015-2017 Mustang GT 5.0L with a Borla S-Type axle-back\u003c\/li\u003e\n\u003cli\u003eChanges the exhaust note to Borla's Sound of Power character without replacing the full exhaust system\u003c\/li\u003e\n\u003cli\u003eAdds stainless steel tips for an updated rear appearance\u003c\/li\u003e\n\u003cli\u003eListed for both automatic and manual transmission GT models\u003c\/li\u003e\n\u003cli\u003eComes from a manufacturer that specializes in stainless steel performance exhaust\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2015-2017 Ford Mustang GT (5.0L), Convertible\u003c\/li\u003e\u003c\/ul\u003e","brand":"Borla","offers":[{"title":"Default Title","offer_id":68305999855801,"sku":"BOR11887","price":1049.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/11887-main-1-xlarge.jpg?v=1794430415"},{"product_id":"borla-axle-back-exhaust-system-atak-r-stainless-steel-tips-2015-2023-mustang-11939","title":"Borla Axle-Back Exhaust System - Atak(R) - Stainless Steel Tips (2015-2023 Mustang) - 11939","description":"\u003cp\u003eThe Borla ATAK axle-back exhaust system, part number 11939, replaces the factory exhaust components from the rear axle back on the 2015-2023 Ford Mustang EcoBoost with the 2.3L four-cylinder engine. It is part of Borla's ATAK line and finishes with stainless steel tips, giving the rear of the car a more motorsport-inspired look while changing the exhaust note that comes from behind the car.\u003c\/p\u003e\n\u003cp\u003eBorla describes itself as a pioneer in stainless steel performance exhaust. The company started out building exhaust systems for collectible concours cars from marques such as Rolls-Royce and Ferrari and now builds systems for street, off-road, and racing vehicles. For EcoBoost Mustang owners who want the ATAK sound character and a cleaner rear appearance without replacing the full exhaust system, this axle-back is a direct way to get both from an established exhaust manufacturer.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBorla ATAK series axle-back exhaust system\u003c\/li\u003e\n\u003cli\u003eManufacturer part number 11939\u003c\/li\u003e\n\u003cli\u003eStainless steel exhaust tips\u003c\/li\u003e\n\u003cli\u003eAxle-back design that replaces the exhaust components from the rear axle rearward\u003c\/li\u003e\n\u003cli\u003eDesigned for the 2015-2023 Mustang EcoBoost 2.3L\u003c\/li\u003e\n\u003cli\u003eNot intended for vehicles equipped with the active valve exhaust system (4 tips)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eStainless Steel Tips from a Stainless Exhaust Specialist\u003c\/h3\u003e\u003cp\u003eThis ATAK axle-back finishes with stainless steel tips. Borla has built its reputation on stainless steel performance exhaust and traces its origins to producing systems for classic Rolls-Royce and Ferrari automobiles before expanding into exhaust for modern street, off-road, and racing vehicles.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eThe ATAK line delivers Borla's signature exhaust tone, which the company calls the Sound of Power. Borla states that its exhaust upgrades are intended to add power and torque, improve fuel economy, extend engine life, and give the vehicle a more motorsport-styled appearance. Borla does not publish specific horsepower, torque, or fuel economy figures for this part.\u003c\/p\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSwaps the rear section of the factory exhaust for Borla's ATAK sound without replacing the entire system\u003c\/li\u003e\n\u003cli\u003eStainless steel tips update the look of the rear of the car\u003c\/li\u003e\n\u003cli\u003eBuilt specifically around the 2.3L EcoBoost Mustang platform\u003c\/li\u003e\n\u003cli\u003eComes from a manufacturer with a long history in stainless steel performance exhaust\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2015-2023 Ford Mustang EcoBoost (2.3L)\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment notes:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eEXCEPT Vehicles Equipped With Active Exhaust (4 tips)\u003c\/li\u003e\n\u003cli\u003eEXCEPT vehicles with Active Valve Exhaust System (4 tips)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Borla","offers":[{"title":"Default Title","offer_id":68305999954105,"sku":"BOR11939","price":888.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/11939-main-1-xlarge.jpg?v=1794430416"},{"product_id":"borla-axle-back-exhaust-system-atak-stainless-steel-tips-2024-2026-mustang-w-non-active-exhaust-11984","title":"Borla Axle-Back Exhaust System - ATAK - Stainless Steel Tips (2024-2026 Mustang w\/ Non Active Exhaust) - 11984","description":"\u003cp\u003eBorla part number 11984 is an ATAK axle-back exhaust system engineered for the 5.0L Mustang GT that does not have the factory Active Exhaust system. It replaces the rear section of the factory exhaust with T-304 stainless steel components, Borla mufflers using Polyphonic Harmonizer technology, and 4-inch bright chrome tips on T-304 stainless steel. ATAK is Borla's aggressive sound level, aimed at owners who want a noticeably bolder exhaust note than stock.\u003c\/p\u003e\n\u003cp\u003eThe system is built around Borla's straight-through, patented multi-core muffler design. It uses mandrel-bent tubing and CNC manufacturing for an accurate fit. It suits both coupe and convertible models of the current-generation Mustang GT without Active Exhaust. For owners who want a stainless axle-back with a distinct, full-bodied tone and long-term durability, this system pairs that sound with Borla's Million-Mile Warranty.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBorla ATAK sound level, described by the manufacturer as aggressive\u003c\/li\u003e\n\u003cli\u003ePolyphonic Harmonizer muffler technology using patented units with pipes of different diameters and lengths\u003c\/li\u003e\n\u003cli\u003eStraight-through, patented multi-core muffler design\u003c\/li\u003e\n\u003cli\u003ePremium T-304 stainless steel construction\u003c\/li\u003e\n\u003cli\u003e4-inch bright chrome on T-304 stainless steel exhaust tips\u003c\/li\u003e\n\u003cli\u003eUltra-smooth mandrel bends\u003c\/li\u003e\n\u003cli\u003ePrecision CNC (computer numerical control) manufacturing for an accurate fit\u003c\/li\u003e\n\u003cli\u003eDesigned for the 5.0L Mustang GT not equipped with Active Exhaust\u003c\/li\u003e\n\u003cli\u003eFits both coupe and convertible models\u003c\/li\u003e\n\u003cli\u003eBacked by the Borla Million-Mile Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eT-304 Stainless Steel Construction with Mandrel Bends\u003c\/h3\u003e\u003cp\u003eBorla builds this axle-back from premium T-304 stainless steel. The manufacturer positions this material above T-400 series alternatives such as 409 stainless for both performance and durability. The 4-inch tips use the same T-304 stainless base with a bright chrome finish.\u003c\/p\u003e\u003cp\u003eThe tubing is shaped with ultra-smooth mandrel bends, which keep the pipe diameter consistent through each bend to support exhaust flow. Every system is produced with precision CNC manufacturing so that the components line up accurately on installation.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eThe mufflers use Borla's Polyphonic Harmonizer technology. Inside, patented units contain pipes of varying diameters and lengths. Each pipe produces its own exhaust note, and these notes blend together into what Borla describes as a clean, rich, full-bodied sound. Combined with the ATAK sound level, the result is an aggressive version of the Borla Sound of Power.\u003c\/p\u003e\u003cp\u003eFlow is handled by a straight-through, patented multi-core design that Borla says is intended to free up hidden horsepower. According to the manufacturer, the increased exhaust velocity contributes to power, driving excitement, and fuel economy. Borla does not publish specific horsepower, torque, or mileage figures for this system.\u003c\/p\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eYou own a 5.0L Mustang GT without Active Exhaust and want a more aggressive exhaust note than the factory system provides.\u003c\/li\u003e\n\u003cli\u003eThe Polyphonic Harmonizer mufflers are designed to produce a layered, full-bodied tone rather than a single-pitch drone.\u003c\/li\u003e\n\u003cli\u003eT-304 stainless steel construction is intended for long-term durability compared with 400-series stainless alternatives.\u003c\/li\u003e\n\u003cli\u003eCNC manufacturing and mandrel-bent tubing are aimed at accurate fitment and smooth exhaust flow.\u003c\/li\u003e\n\u003cli\u003eThe 4-inch bright chrome tips give the rear of the car a clean, finished appearance.\u003c\/li\u003e\n\u003cli\u003eThe Borla Million-Mile Warranty provides long-term coverage on the system.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2024 Ford Mustang GT (5.0L), Fastback \u0026amp; Convertible\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eBorla Million-Mile Warranty\u003c\/p\u003e","brand":"Borla","offers":[{"title":"Default Title","offer_id":68306000085177,"sku":"BOR11984","price":989.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/11984-main-1-xlarge.jpg?v=1794430416"},{"product_id":"borla-axle-back-exhaust-system-s-type-black-chrome-tips-2024-2026-mustang-w-non-active-exhaust-11983bc","title":"Borla Axle-Back Exhaust System - S-Type - Black Chrome Tips (2024-2026 Mustang w\/ Non Active Exhaust) - 11983BC","description":"\u003cp\u003eThe Borla 11983BC is an S-Type axle-back exhaust system for the 5.0L Mustang GT built without the factory Active Exhaust option. It replaces the rear section of the exhaust behind the axle and finishes it with 4-inch black chrome tips over T-304 stainless steel, pairing Borla's straight-through, patented multi-core muffler technology with the S-Type sound level for a more pronounced exhaust note on the current-generation Mustang GT.\u003c\/p\u003e\n\u003cp\u003eThis system suits owners who want a clear change in sound and a darker tip finish without replacing the full exhaust. It is constructed entirely from T-304 stainless steel with mandrel-bent tubing and CNC-controlled manufacturing for accurate fitment, and it fits both coupe and convertible body styles. Borla covers the system with its Million-Mile Warranty.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAxle-back exhaust system, Borla part number 11983BC\u003c\/li\u003e\n\u003cli\u003eDesigned for the 5.0L Mustang GT not equipped with Active Exhaust\u003c\/li\u003e\n\u003cli\u003eS-Type sound level\u003c\/li\u003e\n\u003cli\u003e4-inch tips with a black chrome finish over T-304 stainless steel\u003c\/li\u003e\n\u003cli\u003eStraight-through design using Borla's patented multi-core technology\u003c\/li\u003e\n\u003cli\u003eBuilt from T-304 stainless steel throughout\u003c\/li\u003e\n\u003cli\u003eMandrel-bent tubing for smooth exhaust flow\u003c\/li\u003e\n\u003cli\u003eCNC (computer numerical control) manufacturing for accurate fit\u003c\/li\u003e\n\u003cli\u003eFits both coupe and convertible models\u003c\/li\u003e\n\u003cli\u003eAlso offered by Borla with bright chrome on T-304 stainless steel tips or with carbon fiber tips\u003c\/li\u003e\n\u003cli\u003eBacked by the Borla Million-Mile Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eT-304 Stainless Steel Construction with Black Chrome Tips\u003c\/h3\u003e\u003cp\u003eBorla builds this axle-back from T-304 stainless steel, which the manufacturer positions as a better material for performance and durability than T-400 series stainless such as 409. The tubing is formed with mandrel bends that keep the bend radius smooth and consistent, and the components are manufactured using CNC processes to help the system line up correctly with the vehicle on installation.\u003c\/p\u003e\u003cp\u003eThe 4-inch tips carry a black chrome finish applied over T-304 stainless steel. Because of that finish, Borla advises against using its Stainless Steel Polish (part number 21461) on these tips. Instead, the manufacturer suggests cleaning them with hot water and a microfiber cloth.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eThe system uses Borla's straight-through layout with patented multi-core technology. According to Borla, this design raises exhaust velocity, which the manufacturer credits with adding power, improving driving feel, and contributing to fuel economy. Borla does not state specific horsepower, torque, or mileage figures for this part.\u003c\/p\u003e\u003cp\u003eSound is tuned to Borla's S-Type level, the brand's classic sound profile, delivering the characteristic Borla exhaust tone. Mandrel-bent tubing helps maintain flow through the bends rather than restricting it as crush-bent tubing can.\u003c\/p\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eProvides an S-Type exhaust tone for a 5.0L Mustang GT that did not come with the factory Active Exhaust system\u003c\/li\u003e\n\u003cli\u003eBlack chrome tips give a darker rear-end appearance than bright chrome\u003c\/li\u003e\n\u003cli\u003eT-304 stainless steel construction is chosen by Borla for durability\u003c\/li\u003e\n\u003cli\u003eAxle-back design changes the sound and look without replacing the full exhaust\u003c\/li\u003e\n\u003cli\u003eCNC manufacturing is intended to provide accurate fitment\u003c\/li\u003e\n\u003cli\u003eCovered by Borla's Million-Mile Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2024 Ford Mustang GT (5.0L), Fastback \u0026amp; Convertible\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eBorla Million-Mile Warranty\u003c\/p\u003e","brand":"Borla","offers":[{"title":"Default Title","offer_id":68306001756345,"sku":"BOR11983BC","price":1039.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/11983BC-main-1-xlarge.jpg?v=1794430417"},{"product_id":"borla-axle-back-exhaust-system-atak-r-stainless-black-tips-2015-2017-mustang-11895bc","title":"Borla Axle-Back Exhaust System - Atak(R) - Stainless Black Tips (2015-2017 Mustang) - 11895BC","description":"\u003cp\u003eThe Borla ATAK axle-back exhaust system, part number 11895BC, is built for the 2015-2017 Ford Mustang GT with the 5.0L V8. It replaces the factory exhaust from the rear axle back and finishes with stainless tips in a black finish. ATAK is the most aggressive-sounding line in Borla's lineup, and this system pairs that character with a darker look at the rear of the car.\u003c\/p\u003e\n\u003cp\u003eBorla lists the system for both automatic and manual transmission cars in this rear-wheel-drive, two-door Mustang generation, including the GT Convertible. It suits S550 owners who want a more pronounced exhaust note and a cleaner rear appearance from a manufacturer that specializes in stainless steel performance exhaust, without replacing the full system.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBorla ATAK series axle-back exhaust system\u003c\/li\u003e\n\u003cli\u003eManufacturer part number 11895BC\u003c\/li\u003e\n\u003cli\u003eStainless exhaust tips with a black finish\u003c\/li\u003e\n\u003cli\u003eDesigned for the 2015-2017 Ford Mustang GT 5.0L V8\u003c\/li\u003e\n\u003cli\u003eListed for both automatic and manual transmission models\u003c\/li\u003e\n\u003cli\u003eRear-wheel-drive, two-door application, including the GT Convertible\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBorla Stainless Exhaust Construction with Black Tips\u003c\/h3\u003e\u003cp\u003eBorla Performance Industries designs and manufactures stainless steel performance exhaust systems. The company started by building exhaust for concours-level classics such as Rolls-Royce and Ferrari, and later expanded into exhaust for street, off-road, and racing vehicles.\u003c\/p\u003e\u003cp\u003eOn this ATAK axle-back, the tips are stainless with a black finish. The darker finish gives the rear of the Mustang a more subdued appearance than polished tips.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eThe ATAK name identifies the most aggressive sound profile in Borla's lineup, part of what the company calls its \"Sound of Power.\" Owners can expect a more assertive exhaust note under throttle and through each shift than the stock system produces.\u003c\/p\u003e\u003cp\u003eBorla says its exhaust upgrades are intended to improve power and torque, fuel economy, and engine longevity. The manufacturer does not publish specific figures for this system.\u003c\/p\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eYou want the aggressive ATAK sound character on your 2015-2017 Mustang GT 5.0L without replacing the entire exhaust.\u003c\/li\u003e\n\u003cli\u003eYou prefer black-finish stainless tips that give the rear of the car a darker look.\u003c\/li\u003e\n\u003cli\u003eYou want an exhaust from a manufacturer that specializes in stainless steel performance exhaust.\u003c\/li\u003e\n\u003cli\u003eBorla lists the system for both automatic and manual transmission cars, including the GT Convertible.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2015-2017 Ford Mustang GT (5.0L), Convertible\u003c\/li\u003e\u003c\/ul\u003e","brand":"Borla","offers":[{"title":"Default Title","offer_id":68306003099833,"sku":"BOR11895BC","price":1097.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/11895BC-main-1-xlarge.jpg?v=1794430418"},{"product_id":"mbrp-t304-stainless-steel-2-5-axle-back-dual-rear-exit-carbon-fiber-tips-2015-2023-mustang-2-3l-ecoboost-s72473cf","title":"MBRP T304 Stainless Steel 2.5\" Axle-Back Dual Rear Exit - Carbon Fiber Tips (2015-2023 Mustang 2.3L EcoBoost) - S72473CF","description":"\u003cp\u003eThe MBRP S72473CF is an axle-back exhaust system for the 2.3L EcoBoost Mustang. It is built from T304 stainless steel in a 2.5-inch configuration and finishes with a dual rear exit wearing carbon fiber tips. As an axle-back, it replaces the rear section of the factory exhaust behind the rear axle and leaves the rest of the system in place.\u003c\/p\u003e\n\u003cp\u003eThis system suits EcoBoost owners who want to upgrade the rear of their exhaust with a stainless steel replacement and a carbon fiber finish at the rear. The T304 stainless construction, the dual rear exit layout, and the carbon fiber tips are the main reasons to consider this MBRP part for a 2015-2023 four-cylinder Mustang.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eManufacturer part number: S72473CF\u003c\/li\u003e\n\u003cli\u003eT304 stainless steel construction\u003c\/li\u003e\n\u003cli\u003e2.5-inch axle-back design\u003c\/li\u003e\n\u003cli\u003eDual rear exit configuration\u003c\/li\u003e\n\u003cli\u003eCarbon fiber exhaust tips\u003c\/li\u003e\n\u003cli\u003eEngineered for the 2.3L EcoBoost Mustang\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eT304 Stainless Steel Construction\u003c\/h3\u003e\u003cp\u003eMBRP builds the S72473CF axle-back from T304 stainless steel and pairs it with carbon fiber tips. The result is a stainless steel system that finishes in a carbon fiber look at the rear of the car.\u003c\/p\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eReplaces the factory axle-back section on 2.3L EcoBoost Mustangs with a T304 stainless steel system\u003c\/li\u003e\n\u003cli\u003eCarbon fiber tips change the look of the rear of the car\u003c\/li\u003e\n\u003cli\u003eRetains a dual rear exit layout\u003c\/li\u003e\n\u003cli\u003eAxle-back design leaves the rest of the factory exhaust in place\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2015-2023 Ford Mustang EcoBoost (2.3L)\u003c\/li\u003e\u003c\/ul\u003e","brand":"MBRP Exhaust","offers":[{"title":"Default Title","offer_id":68306003689657,"sku":"MBRPS72473CF","price":384.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/unnamed_ab9c9fff-c794-4bba-92b9-60d53232ed9d.webp?v=1794435572"},{"product_id":"borla-axle-back-exhaust-system-s-type-stainless-black-tips-2015-2017-mustang-11887bc","title":"Borla Axle-Back Exhaust System - S-Type - Stainless Black Tips (2015-2017 Mustang) - 11887BC","description":"\u003cp\u003eThe Borla S-Type Axle-Back Exhaust System, part number 11887BC, replaces the factory exhaust components from the rear axle back on 2015-2017 Ford Mustang GT models powered by the 5.0L V8. Borla lists the system as compatible with both automatic and manual transmission cars in this rear-wheel-drive, two-door platform. It finishes in stainless tips with a black treatment that gives the rear of the S550 a darker, more aggressive appearance.\u003c\/p\u003e\n\u003cp\u003eBorla positions its exhaust upgrades as a way to add the brand's signature exhaust note along with motorsport-inspired styling. The manufacturer also states that its systems deliver improvements in power, torque, and fuel economy and support longer engine life, though it does not publish specific figures for this part. For owners of an early S550 GT who want a bolt-on change to sound and rear-end looks without replacing the entire exhaust, this S-Type axle-back is a focused option from a long-established exhaust manufacturer.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBorla S-Type axle-back exhaust configuration\u003c\/li\u003e\n\u003cli\u003eManufacturer part number 11887BC\u003c\/li\u003e\n\u003cli\u003eStainless tips with a black finish\u003c\/li\u003e\n\u003cli\u003eSpecified by Borla for the 2015-2017 Mustang GT and GT Convertible with the 5.0L V8\u003c\/li\u003e\n\u003cli\u003eListed for both automatic and manual transmission applications\u003c\/li\u003e\n\u003cli\u003eDesigned for the rear-wheel-drive, two-door Mustang platform\u003c\/li\u003e\n\u003cli\u003eManufacturer states Borla exhaust upgrades provide gains in power and torque, better fuel economy, and longer engine life (no specific figures provided)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBorla Stainless Exhaust Heritage\u003c\/h3\u003e\u003cp\u003eBorla Performance Industries is known for building performance exhaust from stainless steel and is regarded as an early innovator in that field. The company got its start roughly twenty years before this listing was written, producing exhaust systems for high-end collector vehicles such as Rolls-Royce and Ferrari models.\u003c\/p\u003e\u003cp\u003eFrom that background in concours-level work, Borla has grown into a major supplier of exhaust systems for modern performance vehicles used on the street, off-road, and in competition. This S-Type axle-back for the S550 Mustang GT carries that experience forward, finished with stainless tips in a black treatment for a refined look at the rear bumper.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eBorla describes its exhaust systems as delivering the brand's characteristic exhaust tone, which the company emphasizes as a central part of the driving experience under throttle and through each gear change.\u003c\/p\u003e\u003cp\u003eAccording to the manufacturer, upgrading to a Borla exhaust can increase power and torque, improve fuel economy, and contribute to longer engine life. Borla does not provide measured gains or test conditions for this specific axle-back, so these should be understood as general brand claims rather than quantified results.\u003c\/p\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSwaps the factory rear exhaust section for a Borla S-Type axle-back on 5.0L Mustang GT models\u003c\/li\u003e\n\u003cli\u003eBlack-finished stainless tips change the rear appearance of the car\u003c\/li\u003e\n\u003cli\u003eAdds Borla's signature exhaust note without replacing the full exhaust system\u003c\/li\u003e\n\u003cli\u003eListed for both manual and automatic transmission cars\u003c\/li\u003e\n\u003cli\u003eBuilt by a manufacturer with a long history in stainless performance exhaust for street, off-road, and racing use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2015-2017 Ford Mustang GT (5.0L), Convertible\u003c\/li\u003e\u003c\/ul\u003e","brand":"Borla","offers":[{"title":"Default Title","offer_id":68306068013241,"sku":"BOR11887BC","price":1097.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/11887BC-main-1-xlarge.jpg?v=1794430420"},{"product_id":"mbrp-s7211cf-2018-2023-mustang-gt-pro-series-2-5-axleback-w-quad-carbon-fiber-4-tips-race-non-active","title":"MBRP S7211CF 2018-2023 Mustang GT Pro-Series 2.5\" Axleback w\/ Quad Carbon Fiber 4\" Tips - Race (Non-Active)","description":"\u003cp\u003eThe MBRP S7211CF is a Pro Series axle-back exhaust for the 2018-2023 Mustang GT, built from T304 stainless steel with 2.5 inch tubing and finished with four 4 inch carbon fiber tips. This is the Race version, configured for cars without the factory active exhaust system. It replaces the factory components behind the axle with a vehicle-specific muffler design and fully mandrel-bent tubing intended to move exhaust out efficiently.\u003c\/p\u003e\n\u003cp\u003eMBRP developed its muscle car systems through extensive time on its in-house Mustang 1100 AWD-SE chassis dynamometer along with road and track testing, refining the design along the way. For S550 GT owners who want a more aggressive exhaust note and a distinctive quad carbon fiber tip finish without cutting or welding, this bolt-on axle-back mounts to the OEM hangers and can serve as a foundation for other modifications such as cold air intakes and tuners.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMBRP Pro Series axle-back, part number S7211CF\u003c\/li\u003e\n\u003cli\u003eT304 stainless steel construction\u003c\/li\u003e\n\u003cli\u003e2.5 inch tubing diameter\u003c\/li\u003e\n\u003cli\u003eQuad 4 inch carbon fiber tips\u003c\/li\u003e\n\u003cli\u003eRace sound version\u003c\/li\u003e\n\u003cli\u003eNon-Active configuration\u003c\/li\u003e\n\u003cli\u003eVehicle-specific muffler design\u003c\/li\u003e\n\u003cli\u003eFully mandrel-bent tubing with minimal bend angles\u003c\/li\u003e\n\u003cli\u003eBolt-on, no-weld design that mounts to the OEM hangers\u003c\/li\u003e\n\u003cli\u003eDeveloped using MBRP's in-house Mustang 1100 AWD-SE chassis dynamometer plus road and track testing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eT304 Stainless Steel Pro Series Construction\u003c\/h3\u003e\u003cp\u003eThe Pro Series is MBRP's top line of performance exhaust, and this axle-back is built from T304 stainless steel for long-term durability and a finish that holds its appearance. MBRP notes that the material is easy to clean and maintain, making it a sensible choice for cars that see harsh conditions.\u003c\/p\u003e\u003cp\u003eThe tubing is fully mandrel bent, which keeps the diameter consistent through each bend, and MBRP designed the routing with minimal bend angles. The system is direct fit to the factory hangers, so it is engineered to bolt into place rather than requiring fabrication.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eMBRP refined its muscle car systems over many hours on its in-house Mustang 1100 AWD-SE chassis dynamometer and hundreds of miles of road and track driving. The vehicle-specific muffler, mandrel-bent tubing, and minimal bend angles are all aimed at getting exhaust out of the car quickly.\u003c\/p\u003e\u003cp\u003eSound tuning was a specific design goal, and this is the Race version of the axle-back. The quad 4 inch carbon fiber tips give the rear of the GT a distinct look that sets it apart from polished or black stainless tip options.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBolt-on, no-weld installation\u003c\/li\u003e\n\u003cli\u003eMBRP estimates installation at one and a half to two hours\u003c\/li\u003e\n\u003cli\u003eDirect fit to the OEM exhaust hangers\u003c\/li\u003e\n\u003cli\u003eClamps and parts needed for installation are included in one box\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eYou want a more aggressive exhaust sound on a 2018-2023 Mustang GT without the factory active exhaust\u003c\/li\u003e\n\u003cli\u003eYou prefer T304 stainless steel for durability and easy upkeep\u003c\/li\u003e\n\u003cli\u003eYou want the look of quad 4 inch carbon fiber tips\u003c\/li\u003e\n\u003cli\u003eYou want a bolt-on upgrade that installs on the factory hangers without welding\u003c\/li\u003e\n\u003cli\u003eYou plan to add intake or tuning modifications and want a free-flowing, mandrel-bent exhaust as a starting point\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2018-2023 Ford Mustang GT\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eClamps and hardware needed for installation (per manufacturer, specific items not itemized)\u003c\/li\u003e\u003c\/ul\u003e","brand":"MBRP Exhaust","offers":[{"title":"Default Title","offer_id":68306068570297,"sku":"MBRPS72113CF","price":649.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/unnamed_e67bf0ee-5cba-4706-9ee0-0f24093cc52e.webp?v=1794435579"},{"product_id":"borla-axle-back-exhaust-system-s-type-stainless-steel-tips-2024-2026-mustang-w-non-active-exhaust-11983","title":"Borla Axle-Back Exhaust System - S-Type - Stainless Steel Tips (2024-2026 Mustang w\/ Non Active Exhaust) - 11983","description":"\u003cp\u003eBorla part number 11983 is an S-Type axle-back exhaust system for the 5.0L Mustang GT, built specifically for cars that do not have the factory Active Exhaust system. It replaces the rear section of the exhaust behind the axle and finishes with 4-inch tips in a bright chrome finish over T-304 stainless steel. The S-Type sound level is Borla's long-standing, classic tone, giving the V8 a more assertive voice than stock.\u003c\/p\u003e\n\u003cp\u003eThe system uses Borla's patented multi-core muffler design in a straight-through layout, intended to raise exhaust velocity and free up power the factory exhaust holds back. Borla also credits the design with gains in driving enjoyment and fuel economy. It suits both coupe and convertible GT models, and Borla offers versions of this system with black chrome or carbon fiber tip finishes for owners who want a different look. For non-Active Exhaust GT owners seeking a stainless axle-back with a recognized sound and a Million-Mile Warranty, this system is a straightforward choice.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAxle-back exhaust system, Borla part number 11983\u003c\/li\u003e\n\u003cli\u003eS-Type sound level, Borla's classic tone\u003c\/li\u003e\n\u003cli\u003e4-inch tips with bright chrome finish over T-304 stainless steel\u003c\/li\u003e\n\u003cli\u003eConstructed from T-304 stainless steel throughout\u003c\/li\u003e\n\u003cli\u003ePatented multi-core muffler technology with a straight-through design\u003c\/li\u003e\n\u003cli\u003eMandrel-bent tubing for smooth, unrestricted flow\u003c\/li\u003e\n\u003cli\u003eCNC manufacturing for accurate fitment\u003c\/li\u003e\n\u003cli\u003eDesigned for the 5.0L Mustang GT without Active Exhaust\u003c\/li\u003e\n\u003cli\u003eFits coupe and convertible body styles\u003c\/li\u003e\n\u003cli\u003eAlso offered by Borla with black chrome or carbon fiber tip options\u003c\/li\u003e\n\u003cli\u003eBacked by the Borla Million-Mile Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eT-304 Stainless Steel Construction\u003c\/h3\u003e\u003cp\u003eBorla builds this system from T-304 stainless steel, a grade the company positions above the 400-series stainless steels, such as 409, used in many lower-cost exhausts. Borla selects T-304 for its combination of performance and long-term durability, and the 4-inch tips use the same base material beneath their bright chrome finish.\u003c\/p\u003e\u003cp\u003eThe tubing is mandrel bent, which keeps the inside diameter consistent through each bend so exhaust gases flow without the restriction of crimped or crushed sections. Components are produced with computer numerical control (CNC) manufacturing, which Borla uses to hold tight tolerances and deliver an accurate fit on the vehicle.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eAt the core of this system is Borla's patented multi-core technology arranged in a straight-through configuration. By increasing exhaust velocity, the design is intended to release power the stock system leaves untapped, and Borla states it also contributes to improved fuel economy and a more engaging driving experience.\u003c\/p\u003e\u003cp\u003eThe S-Type sound level delivers the classic Borla character, a deeper and more pronounced note than the factory exhaust that the brand has long been known for among enthusiasts.\u003c\/p\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eEngineered specifically for 5.0L Mustang GT models without Active Exhaust, so it matches the non-Active factory configuration\u003c\/li\u003e\n\u003cli\u003eT-304 stainless steel construction chosen by Borla for durability over 400-series alternatives\u003c\/li\u003e\n\u003cli\u003eMandrel bends and a straight-through multi-core design support exhaust flow and velocity\u003c\/li\u003e\n\u003cli\u003eCNC manufacturing supports precise fitment\u003c\/li\u003e\n\u003cli\u003eClassic S-Type sound for a stronger V8 voice\u003c\/li\u003e\n\u003cli\u003eCovered by Borla's Million-Mile Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2024 Ford Mustang GT (5.0L), Fastback \u0026amp; Convertible\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eBorla Million-Mile Warranty\u003c\/p\u003e","brand":"Borla","offers":[{"title":"Default Title","offer_id":68306068734137,"sku":"BOR11983","price":989.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/11983-main-1-xlarge.jpg?v=1794430421"},{"product_id":"magnaflow-exhaust-products-race-series-stainless-axle-back-system-2015-2018-ecoboost-2-3l","title":"MagnaFlow Exhaust Products Race Series Stainless Axle-Back System 2015-2018 EcoBoost 2.3L","description":"\u003cp\u003eThe MagnaFlow Race Series Stainless Axle-Back System is an aftermarket exhaust upgrade for the Ford Mustang with the 2.3L EcoBoost four-cylinder engine. It is part of MagnaFlow's Race Series product line and uses stainless steel construction. As an axle-back design, it replaces the factory exhaust components from the rear axle back.\u003c\/p\u003e\n\u003cp\u003eThis system suits EcoBoost Mustang owners who want a stainless steel replacement for the rear section of the factory exhaust from an established exhaust manufacturer. Because an axle-back covers only the rear portion of the system, it is a focused upgrade that leaves the forward exhaust components in place.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePart of the MagnaFlow Race Series product line\u003c\/li\u003e\n\u003cli\u003eStainless steel construction\u003c\/li\u003e\n\u003cli\u003eAxle-back configuration that replaces the exhaust components from the rear axle back\u003c\/li\u003e\n\u003cli\u003eDesigned for the 2.3L EcoBoost Ford Mustang\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eStainless Steel Construction\u003c\/h3\u003e\u003cp\u003eMagnaFlow builds this Race Series axle-back system from stainless steel. The manufacturer listing does not specify the stainless grade or additional construction details.\u003c\/p\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eReplaces the rear section of the factory exhaust with a stainless steel MagnaFlow system\u003c\/li\u003e\n\u003cli\u003eRace Series axle-back developed specifically for the 2.3L EcoBoost Mustang\u003c\/li\u003e\n\u003cli\u003eAxle-back layout keeps the upgrade limited to the rear of the exhaust system\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2015-2016 Ford Mustang EcoBoost (2.3L)\u003c\/li\u003e\u003c\/ul\u003e","brand":"MagnaFlow","offers":[{"title":"Default Title","offer_id":68306069684409,"sku":"MAG19345","price":694.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/19345.jpg?v=1794436143"},{"product_id":"mbrp-2-5-axle-back-exhaust-kit-black-series-aluminized-steel-with-4-black-tips-2015-2017-s550-mustang-gt-2026-mustang-gt-non-active-s7276blk","title":"MBRP 2.5\" Axle-Back Exhaust Kit Black-Series Aluminized Steel With 4\" Black Tips (2015-2017 S550 Mustang GT \/ 2026 Mustang GT Non-Active) - S7276BLK","description":"\u003cp\u003eThe MBRP Black-Series Axle-Back Exhaust Kit, part number S7276BLK, replaces the factory mufflers and rear exhaust section on non-active exhaust Mustang GT models. It uses 2.5 inch mandrel bent aluminized steel tubing and 4 inch dual wall tips. The entire assembly is finished in black powder coat for a dark look at the rear of the car.\u003c\/p\u003e\n\u003cp\u003eThis axle-back is aimed at owners who want a more aggressive exhaust note and a different rear-end appearance without replacing the full system. MBRP also says it saves a substantial amount of weight compared to the OEM mufflers. It uses a cut and clamp design, so the factory piping must be cut once, after which the kit bolts in. MBRP includes the mounting hardware and detailed instructions, which makes it a practical choice for enthusiasts who do their own work.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2.5 inch mandrel bent tubing\u003c\/li\u003e\n\u003cli\u003e4.0 inch dual wall exhaust tips\u003c\/li\u003e\n\u003cli\u003eAluminized steel construction\u003c\/li\u003e\n\u003cli\u003eBlack powder coat finish over the complete assembly\u003c\/li\u003e\n\u003cli\u003eAxle-back configuration with cut and clamp, bolt-on design\u003c\/li\u003e\n\u003cli\u003eDesigned for Mustang GT models without the active exhaust system\u003c\/li\u003e\n\u003cli\u003eSubstantial weight savings over the OEM mufflers, per MBRP\u003c\/li\u003e\n\u003cli\u003eIncludes all necessary hardware and installation instructions\u003c\/li\u003e\n\u003cli\u003eManufacturer part number: S7276BLK\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePowder Coated Aluminized Steel Construction\u003c\/h3\u003e\u003cp\u003eThe S7276BLK is built entirely from aluminized steel. Its piping is 2.5 inch diameter and mandrel bent, a bending method that keeps the tubing at a consistent diameter through each bend.\u003c\/p\u003e\u003cp\u003eThe full assembly is powder coated black, tips included, for a uniform stealth finish. The 4 inch tips use dual wall construction.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eMBRP describes the sound of this Black-Series axle-back as aggressive, giving the car a noticeably stronger exhaust note than the factory mufflers.\u003c\/p\u003e\u003cp\u003eMBRP states that the kit offers substantial weight savings compared to the OEM mufflers, reducing mass at the rear of the car.\u003c\/p\u003e\u003cp\u003eThe black powder coat finish and 4 inch black tips change the rear styling, giving a darker look than a polished or bare-metal exhaust.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eInstallation requires cutting the factory exhaust piping.\u003c\/li\u003e\n\u003cli\u003eAfter the factory system has been modified, the kit installs as a simple bolt-in procedure.\u003c\/li\u003e\n\u003cli\u003eAll necessary hardware and detailed installation instructions are included.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eYou want a more aggressive exhaust note from your non-active exhaust Mustang GT without replacing the entire exhaust system.\u003c\/li\u003e\n\u003cli\u003eYou prefer a blacked-out rear appearance, with powder coated piping and 4 inch dual wall black tips.\u003c\/li\u003e\n\u003cli\u003eYou want to reduce weight compared to the factory mufflers.\u003c\/li\u003e\n\u003cli\u003eYou do your own work and want a kit that ships with the required hardware and instructions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2026 Ford Mustang GT, Fastback \u0026amp; Convertible\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAluminized steel Black-Series axle-back exhaust with 4 inch black tips\u003c\/li\u003e\n\u003cli\u003eAll necessary installation hardware\u003c\/li\u003e\n\u003cli\u003eInstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MBRP Exhaust","offers":[{"title":"Default Title","offer_id":68306070536377,"sku":"MBRPS7276BLK","price":379.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/unnamed_d409b38e-362b-4ff5-abed-c38fdabb2e2d.webp?v=1794435583"},{"product_id":"borla-axle-back-exhaust-system-s-type-stainless-steel-tips-2015-2023-mustang-11889","title":"Borla Axle-Back Exhaust System - S-Type - Stainless Steel Tips (2015-2023 Mustang) - 11889","description":"\u003cp\u003eThe Borla S-Type Axle-Back Exhaust System, part number 11889, replaces the factory exhaust components from the rear axle back on the S550-generation Ford Mustang. It finishes with stainless steel tips and is built for 2.3L EcoBoost cars, giving owners a direct way to change the sound and rear styling of the car without replacing the full exhaust system.\u003c\/p\u003e\n\u003cp\u003eBorla describes the S-Type as delivering its signature \"Sound of Power\" exhaust note along with motorsport-inspired styling. For EcoBoost owners who want a more assertive exhaust character from a company with a long history in stainless steel performance exhaust, this axle-back is a focused upgrade to the most visible and audible section of the system. Note that the manufacturer excludes convertible models and cars equipped with the Active Valve Exhaust System (4 tips).\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBorla S-Type axle-back exhaust system, part number 11889\u003c\/li\u003e\n\u003cli\u003eStainless steel exhaust tips\u003c\/li\u003e\n\u003cli\u003eAxle-back configuration that replaces the exhaust from the rear axle rearward\u003c\/li\u003e\n\u003cli\u003eDesigned for 2.3L EcoBoost Mustang applications with automatic or manual transmission, rear-wheel drive, 2-door\u003c\/li\u003e\n\u003cli\u003eNot compatible with convertible models or vehicles with the Active Valve Exhaust System (4 tips)\u003c\/li\u003e\n\u003cli\u003eTuned to produce Borla's \"Sound of Power\" exhaust tone\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eStainless Steel Tips from a Stainless Exhaust Specialist\u003c\/h3\u003e\u003cp\u003eThe 11889 axle-back finishes with stainless steel tips, giving the rear of the car a clean, finished appearance. Borla Performance Industries is known for designing and manufacturing stainless steel performance exhaust, and the company's background includes building exhaust systems for classic Rolls-Royce and Ferrari automobiles before expanding into street, off-road, and racing applications.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eThe S-Type is built around Borla's \"Sound of Power\" exhaust character, intended to give the car a more pronounced and engaging note under throttle and through each gear change. Borla also states in general terms that its exhaust systems can provide increased power and torque, improved fuel economy, and longer engine life, though no specific figures are provided for this part.\u003c\/p\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eReplaces the factory axle-back section with a Borla S-Type system for a distinct exhaust sound\u003c\/li\u003e\n\u003cli\u003eStainless steel tips update the rear styling of the car\u003c\/li\u003e\n\u003cli\u003eAxle-back design focuses the upgrade on the rear section of the exhaust rather than the full system\u003c\/li\u003e\n\u003cli\u003eEngineered specifically for non-convertible 2.3L EcoBoost Mustangs without the active valve exhaust\u003c\/li\u003e\n\u003cli\u003eComes from a manufacturer with a long track record in stainless steel performance exhaust\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2015-2023 Ford Mustang EcoBoost (2.3L)\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment notes:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eEXCEPT Convertible and Active Exhaust Systems (4 tips)\u003c\/li\u003e\n\u003cli\u003eEXCEPT Convertible models and vehicles with Active Valve Exhaust System (4 tips)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Borla","offers":[{"title":"Default Title","offer_id":68306070634681,"sku":"BOR11889","price":999.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/11889-main-1-xlarge.jpg?v=1794430424"},{"product_id":"borla-axle-back-exhaust-system-s-type-2024-2025-mustang-ecoboost-mustang-ecoboost-premium-11986bc","title":"Borla Axle-Back Exhaust System - S-Type (2024-2025 Mustang EcoBoost, Mustang EcoBoost Premium) - 11986BC","description":"\u003cp\u003eThe Borla S-Type Axle-Back Exhaust System, part number 11986BC, replaces the rear section of the factory exhaust on the current-generation 2.3L EcoBoost Mustang. It is built around 2.5-inch diameter tubing and is engineered specifically for EcoBoost cars that are not equipped with the Active Exhaust feature. Each muffler assembly exits through a single 4-inch round tip with a black chrome finish over T-304 stainless steel.\u003c\/p\u003e\n\u003cp\u003eThe system delivers Borla's S-Type sound, which the manufacturer describes as free of drone inside the cabin, so it suits owners who want a more assertive exhaust note without a constant hum at cruise. Borla builds it from T-304 stainless steel with mandrel bends, CNC-controlled manufacturing for accurate fitment, and all-welded construction, and backs it with the company's Million-Mile Warranty. For EcoBoost owners looking for a bolt-on sound upgrade from a long-established stainless exhaust manufacturer, this axle-back is a straightforward choice.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAxle-back exhaust system, Borla part number 11986BC\u003c\/li\u003e\n\u003cli\u003eS-Type sound profile, stated by Borla to produce no drone inside the vehicle\u003c\/li\u003e\n\u003cli\u003e2.5-inch diameter system\u003c\/li\u003e\n\u003cli\u003eSingle 4-inch round tip on each muffler assembly\u003c\/li\u003e\n\u003cli\u003eTips finished in black chrome over T-304 stainless steel\u003c\/li\u003e\n\u003cli\u003eDesigned for EcoBoost cars without the Active Exhaust feature\u003c\/li\u003e\n\u003cli\u003ePatented straight-through and multi-core muffler technology\u003c\/li\u003e\n\u003cli\u003eConstructed from T-304 stainless steel\u003c\/li\u003e\n\u003cli\u003eMandrel-bent tubing for smooth exhaust flow\u003c\/li\u003e\n\u003cli\u003eCNC manufacturing for accurate fit\u003c\/li\u003e\n\u003cli\u003eAll-welded construction\u003c\/li\u003e\n\u003cli\u003eCovered by the Borla Million-Mile Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eT-304 Stainless Steel, All-Welded Construction\u003c\/h3\u003e\u003cp\u003eBorla fabricates this axle-back from T-304 stainless steel, which the company positions as superior to the T-400 series alloys, such as 409, used in many lower-cost systems. The material choice is intended to provide long service life and a clean appearance over time.\u003c\/p\u003e\u003cp\u003eThe tubing is formed with mandrel bends so the inside diameter stays smooth and consistent through each curve, and the components are produced with computer numerical control (CNC) manufacturing to achieve an accurate fit on the vehicle. All joints are welded rather than clamped or crimped, which Borla specifies for maximum durability.\u003c\/p\u003e\u003cp\u003eThe 4-inch tips use a black chrome finish applied over T-304 stainless steel. Borla does not recommend using its Stainless Steel Polish, part number 21461, on these black chrome tips. Instead, the manufacturer suggests cleaning them with hot water and a microfiber cloth to preserve the finish.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eThe S-Type sound is Borla's classic tone, and the manufacturer states it produces no drone inside the vehicle. That makes it a practical option for daily-driven EcoBoost Mustangs where highway comfort matters as much as the exhaust note.\u003c\/p\u003e\u003cp\u003eBorla's patented straight-through and multi-core muffler design is intended to increase exhaust velocity, and combined with the mandrel-bent 2.5-inch tubing, the system is built to promote efficient flow out of the rear of the car. Borla does not publish specific horsepower or torque figures for this system.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eDesigned for vehicles WITHOUT the Active Exhaust feature; confirm your car is not equipped with Active Exhaust before ordering\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAdds Borla's S-Type exhaust note to an EcoBoost Mustang without introducing in-cabin drone, according to the manufacturer\u003c\/li\u003e\n\u003cli\u003eT-304 stainless steel and all-welded construction are chosen for long-term durability\u003c\/li\u003e\n\u003cli\u003eCNC manufacturing is aimed at an accurate fit on the vehicle\u003c\/li\u003e\n\u003cli\u003eBlack chrome 4-inch tips give the rear of the car a darker, finished look\u003c\/li\u003e\n\u003cli\u003eBacked by Borla's Million-Mile Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2024-2025 Ford Mustang EcoBoost (2.3L), Fastback \u0026amp; Convertible\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eBorla Million-Mile Warranty\u003c\/p\u003e","brand":"Borla","offers":[{"title":"Default Title","offer_id":68306102943929,"sku":"BOR11986BC","price":849.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/11986BC-main-1-xlarge.jpg?v=1794430425"},{"product_id":"borla-axle-back-exhaust-system-atak-r-stainless-steel-tips-2015-2023-mustang-11890","title":"Borla Axle-Back Exhaust System - Atak(R) - Stainless Steel Tips (2015-2023 Mustang) - 11890","description":"\u003cp\u003eThe Borla ATAK Axle-Back Exhaust System, part number 11890, is an aftermarket rear exhaust section for the 2015-2023 Ford Mustang with the 2.3L four-cylinder EcoBoost engine. As an axle-back design, it replaces the factory exhaust from the rear axle back and finishes with stainless steel tips. It is built by Borla, a company known for stainless steel performance exhaust.\u003c\/p\u003e\n\u003cp\u003eBorla markets its exhaust systems around its signature 'Sound of Power' tone, along with gains in power and torque, better fuel economy, longer engine life, and motorsport-inspired styling. For EcoBoost Mustang owners who want a more pronounced exhaust note and a cleaner rear appearance from a recognized brand, the ATAK axle-back is a direct way to get there.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBorla ATAK series axle-back exhaust system\u003c\/li\u003e\n\u003cli\u003eManufacturer part number 11890\u003c\/li\u003e\n\u003cli\u003eStainless steel exhaust tips (described as polished in the supplier listing)\u003c\/li\u003e\n\u003cli\u003eDesigned for the 2015-2023 Mustang 2.3L EcoBoost\u003c\/li\u003e\n\u003cli\u003eListed for both automatic and manual transmission rear-wheel-drive models\u003c\/li\u003e\n\u003cli\u003eProduces Borla's signature 'Sound of Power' exhaust tone\u003c\/li\u003e\n\u003cli\u003eManufacturer cites improved power, torque, and fuel economy, with no specific figures given\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eStainless Steel Tips from a Stainless Exhaust Specialist\u003c\/h3\u003e\u003cp\u003eThe 11890 ATAK axle-back finishes in stainless steel tips, giving the rear of the car a refined, motorsport-inspired look. Stainless steel tips resist corrosion better than plain steel, which helps them hold their appearance over time.\u003c\/p\u003e\u003cp\u003eBorla Performance Industries describes itself as a pioneer in designing and manufacturing stainless steel performance exhaust. The company began by building exhaust systems for classic Rolls-Royce and Ferrari models and now produces exhaust for modern street, off-road, and racing vehicles.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eBorla positions the ATAK axle-back as a way to give the EcoBoost Mustang its distinctive 'Sound of Power,' a more aggressive and engaging note under throttle and through each shift.\u003c\/p\u003e\u003cp\u003eAccording to Borla, its exhaust upgrades add power and torque, improve fuel economy, and extend engine life. The manufacturer does not publish specific horsepower, torque, or efficiency figures for this part.\u003c\/p\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eGives the 2.3L EcoBoost Mustang a stronger, more distinctive exhaust note than the factory system\u003c\/li\u003e\n\u003cli\u003eStainless steel tips sharpen the look of the rear of the car\u003c\/li\u003e\n\u003cli\u003eAxle-back layout replaces only the rear section of the exhaust, leaving the rest of the factory system in place\u003c\/li\u003e\n\u003cli\u003eMade by Borla, a long-established stainless steel performance exhaust manufacturer\u003c\/li\u003e\n\u003cli\u003eListed for both automatic and manual transmission cars\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2015-2023 Ford Mustang EcoBoost (2.3L)\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment notes:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eEXCEPT Convertible and Active Exhaust Systems (4 tips)\u003c\/li\u003e\n\u003cli\u003eEXCEPT Convertible models and vehicles with Active Valve Exhaust System (4 tips)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Borla","offers":[{"title":"Default Title","offer_id":68306103173305,"sku":"BOR11890","price":888.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/11890-main-1-xlarge.jpg?v=1794430425"},{"product_id":"kooks-3-muffler-section-2015-2019-shelby-gt350-converts-kooks-x-pipe-to-full-exh-11546300","title":"Kooks 3\" Muffler Section. 2015-2019 Shelby GT350. Converts Kooks X-Pipe to Full Exh. - 11546300","description":"\u003cp\u003eThe Kooks 11546300 is a stainless steel muffler section built for the 2015-2019 Shelby GT350. It is designed to bolt on behind a Kooks X-pipe, completing the exhaust from that point back. Combined with Kooks headers and the Kooks X-pipe, it turns those components into a full Kooks exhaust system. The section is built from 2-3\/4 in. by 3 in. stainless steel tubing and comes with Kooks mufflers installed.\u003c\/p\u003e\n\u003cp\u003eThis part is meant for GT350 owners who already run, or plan to run, Kooks headers and an X-pipe and want a matching rear section from the same manufacturer. The factory tips are reused, so the rear of the car keeps its stock look. Note that this section is not compatible with the factory exhaust and does not retain the factory valves. Exhaust mode selection is disabled once it is installed.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStainless steel exhaust section using 2-3\/4 in. x 3 in. tubing\u003c\/li\u003e\n\u003cli\u003eKooks mufflers included\u003c\/li\u003e\n\u003cli\u003eKeeps the active exhaust actuator in place so drive mode selection continues to work\u003c\/li\u003e\n\u003cli\u003eExhaust mode selection is disabled with this system installed\u003c\/li\u003e\n\u003cli\u003eReuses the factory exhaust tips\u003c\/li\u003e\n\u003cli\u003eEngineered for use with Kooks headers and the Kooks X-pipe\u003c\/li\u003e\n\u003cli\u003eConverts a Kooks X-pipe setup into a complete Kooks exhaust\u003c\/li\u003e\n\u003cli\u003eKooks part number 11546300\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eStainless Steel Muffler Section Construction\u003c\/h3\u003e\u003cp\u003eKooks builds this section from stainless steel tubing sized at 2-3\/4 in. by 3 in. It is supplied with Kooks mufflers, so the rear section is a matched assembly from the same manufacturer as the headers and X-pipe it is designed to join.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eThe section is intended to work as part of a complete Kooks system with Kooks headers and the Kooks X-pipe, rather than as a standalone add-on to the stock exhaust. The actuator for the active exhaust stays in the system, so the car's drive mode selector still works. The separate exhaust mode selection function no longer operates after installation.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRequires Kooks headers and a Kooks X-pipe; this section does not work with the factory exhaust system\u003c\/li\u003e\n\u003cli\u003eFactory valves are not retained\u003c\/li\u003e\n\u003cli\u003eFactory exhaust tips are reused on this system\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCompletes a Kooks header and X-pipe installation with a rear section from the same manufacturer\u003c\/li\u003e\n\u003cli\u003eStainless steel tubing with Kooks mufflers already included\u003c\/li\u003e\n\u003cli\u003eKeeps the stock tip appearance by reusing the factory tips\u003c\/li\u003e\n\u003cli\u003eDrive mode selection remains functional through the retained actuator\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2015-2019 Ford Mustang GT350\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eKooks mufflers\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot included:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eExhaust tips (the factory tips are reused)\u003c\/li\u003e\u003c\/ul\u003e","brand":"Kooks","offers":[{"title":"Default Title","offer_id":68306103861433,"sku":"KSH11546300","price":1970.13,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/c19afc6f8e1510b7b5642bf8c21dcf36_bb294e74-c54a-4243-9620-bf18ef8cb73a.jpg?v=1794380910"},{"product_id":"ford-performance-2018-2023-mustang-gt-5-0l-sport-muffler-kit-black-chrome-tips-m-5230-m8sba","title":"Ford Performance 2018-2023 Mustang GT 5.0L Sport Muffler Kit - Black Chrome Tips - M-5230-M8SBA","description":"\u003cp\u003eThe Ford Performance Sport Muffler Kit, part number M-5230-M8SBA, is an axle-back exhaust upgrade for the 5.0L Mustang GT. It replaces the factory mufflers with a set of Ford Performance sport mufflers, built from 304 stainless steel and finished with 4-inch black chrome-plated stainless steel tips. Ford Performance designed and tuned the system for performance, an aggressive exhaust note, durability, and a more engaging driving experience.\u003c\/p\u003e\n\u003cp\u003eThis kit suits owners of 2018-2023 Mustang GT models who want a stronger exhaust sound and a darker tip finish than stock, with a part engineered by Ford's own performance division. It uses 2.5-inch mandrel-bent stainless tubing and mounts to the factory hangers and mounts, so it is a practical bolt-in style upgrade for enthusiasts who do their own work. Note that the factory exhaust pipe must be cut to fit the clamp-on mufflers.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAxle-back sport muffler kit from Ford Performance, part number M-5230-M8SBA\u003c\/li\u003e\n\u003cli\u003eConstructed from high-quality 304 stainless steel\u003c\/li\u003e\n\u003cli\u003e2.5-inch stainless steel mandrel-bent tubing\u003c\/li\u003e\n\u003cli\u003eUltra-smooth mandrel bends\u003c\/li\u003e\n\u003cli\u003eWarp-free flanges\u003c\/li\u003e\n\u003cli\u003e4-inch black chrome-plated stainless steel tips\u003c\/li\u003e\n\u003cli\u003eDesigned and tuned for performance, aggressive sound, and durability\u003c\/li\u003e\n\u003cli\u003eUses the stock hangers and mounts\u003c\/li\u003e\n\u003cli\u003eClamp-on muffler installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e304 Stainless Steel Construction\u003c\/h3\u003e\u003cp\u003eFord Performance builds this muffler kit from 304 stainless steel, a grade commonly chosen for exhaust components because of its resistance to corrosion. The 2.5-inch tubing is also stainless steel and is mandrel bent, which keeps the bends smooth rather than crimped.\u003c\/p\u003e\u003cp\u003eThe kit is finished with 4-inch tips made from stainless steel and plated in black chrome. Ford Performance also specifies warp-free flanges and emphasizes the overall craftsmanship of the assembly, with durability listed as one of the core design goals.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eFord Performance tuned these sport mufflers specifically to deliver an aggressive exhaust sound along with optimum performance. The ultra-smooth mandrel bends in the 2.5-inch tubing are part of that design approach. Ford Performance does not publish horsepower, torque, or decibel figures for this kit.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMounts using the factory exhaust hangers and mounts\u003c\/li\u003e\n\u003cli\u003eThe factory exhaust pipe must be cut to install the clamp-on Ford Performance axle-back mufflers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAdds a more aggressive exhaust sound than the factory mufflers, tuned by Ford Performance\u003c\/li\u003e\n\u003cli\u003e304 stainless steel construction chosen for durability\u003c\/li\u003e\n\u003cli\u003e4-inch black chrome-plated stainless tips give the rear of the car a darker, more distinctive look\u003c\/li\u003e\n\u003cli\u003eReuses the stock hangers and mounts, keeping installation straightforward for home mechanics\u003c\/li\u003e\n\u003cli\u003eEngineered by Ford's own performance division for the 5.0L Mustang GT\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2018-2023 Ford Mustang GT (5.0L)\u003c\/li\u003e\n\u003cli\u003e2018-2023 Ford Mustang GT (5.0L), Fastback \u0026amp; Convertible\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ford Performance Parts","offers":[{"title":"Default Title","offer_id":68306106515641,"sku":"FRPM-5230-M8SBA","price":920.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/M-5230-M8SBA_10.jpg?v=1794436153"},{"product_id":"jba-3-409-stainless-steel-axle-back-exhaust-system-with-4-tips-2015-2023-2-3l-mustang-ecoboost-2026-mustang-ecoboost-non-active-40-2688","title":"JBA 3\" 409 Stainless Steel Axle Back Exhaust System with 4\" Tips (2015-2023 2.3L Mustang Ecoboost \/ 2026 Mustang Ecoboost Non Active) - 40-2688","description":"\u003cp\u003eThe JBA 40-2688 is an axle-back exhaust system for the 2.3L EcoBoost Mustang fastback. It replaces the factory rear section with 3-inch 409 stainless steel mandrel-bent tubing, stainless steel high-flow mufflers, and polished chrome stainless steel double-wall tips. The tips are listed at 4 inches. JBA's goal with this system is to swap the restrictive stock rear exhaust for a freer-flowing setup that adds a stronger exhaust note and better throttle response.\u003c\/p\u003e\n\u003cp\u003eJBA describes the system's tone as tuned to sound strong without becoming overwhelming inside the cabin. That makes it a reasonable choice for EcoBoost owners who want more presence from the 2.3L without making the car tiring to drive every day. The kit uses factory-style hangers and includes a hardware kit and instructions. It is designed as a bolt-on, so it suits enthusiasts who handle their own maintenance and upgrades.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e3-inch diameter 409 stainless steel tubing\u003c\/li\u003e\n\u003cli\u003eMandrel-bent tubing construction\u003c\/li\u003e\n\u003cli\u003eStainless steel high-flow mufflers\u003c\/li\u003e\n\u003cli\u003ePolished chrome stainless steel double-wall tips, listed at 4 inches\u003c\/li\u003e\n\u003cli\u003eTip finish intended to resist discoloring\u003c\/li\u003e\n\u003cli\u003eFactory-style hangers\u003c\/li\u003e\n\u003cli\u003eHigh-quality hardware kit included\u003c\/li\u003e\n\u003cli\u003eInstructions included for bolt-on installation\u003c\/li\u003e\n\u003cli\u003eManufacturer states increased horsepower and torque and improved throttle response; no figures are provided\u003c\/li\u003e\n\u003cli\u003eExhaust tone tuned to avoid being overwhelming inside the cabin\u003c\/li\u003e\n\u003cli\u003eJBA part number 40-2688\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e409 Stainless Steel Mandrel-Bent Construction\u003c\/h3\u003e\u003cp\u003eJBA builds this axle-back from 3-inch 409 stainless steel tubing. The tubing is mandrel-bent, which keeps the pipe diameter consistent through each bend instead of letting it crimp or narrow. The mufflers are also stainless steel and use a high-flow design.\u003c\/p\u003e\u003cp\u003eThe tips are polished chrome stainless steel with a double-wall design, and JBA says the finish is meant to resist discoloring. The system mounts with factory-style hangers, and JBA supplies its own high-quality hardware kit for assembly.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eReplacing the restrictive factory rear exhaust with free-flowing mandrel-bent tubing and high-flow mufflers reduces exhaust restriction. JBA says this improves horsepower, torque, and throttle response, but it does not publish dyno figures for this system.\u003c\/p\u003e\u003cp\u003eOn sound, JBA describes a powerful exhaust tone with good flow. The system is tuned so the note stays strong without becoming overwhelming in the cabin, which matters on a car that is driven regularly.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDesigned as a bolt-on installation\u003c\/li\u003e\n\u003cli\u003eUses factory-style hangers\u003c\/li\u003e\n\u003cli\u003eHardware kit and instructions are included\u003c\/li\u003e\n\u003cli\u003eManufacturer describes installation as easy\u003c\/li\u003e\n\u003cli\u003eNot compatible with convertibles or with 2019 and later EcoBoost Mustangs equipped with the factory Active Exhaust option\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eReplaces the restrictive factory axle-back with 3-inch mandrel-bent 409 stainless steel tubing\u003c\/li\u003e\n\u003cli\u003eAdds a stronger exhaust note that JBA tuned to avoid excessive cabin noise\u003c\/li\u003e\n\u003cli\u003eStainless steel high-flow mufflers and double-wall polished tips update both the sound and the rear appearance\u003c\/li\u003e\n\u003cli\u003eFactory-style hangers and a bolt-on design keep installation within reach of a home mechanic\u003c\/li\u003e\n\u003cli\u003eIncludes the hardware and instructions needed for installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2015-2023 Ford Mustang EcoBoost (2.3L)\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment notes:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003ewill NOT fit Convertibles models or 2019+ EcoBoost Mustangs that are equipped with the Active Exhaust Option from the factory\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStainless steel high-flow mufflers\u003c\/li\u003e\n\u003cli\u003ePolished chrome stainless steel double-wall tips\u003c\/li\u003e\n\u003cli\u003eHigh-quality hardware kit\u003c\/li\u003e\n\u003cli\u003eInstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JBA","offers":[{"title":"Default Title","offer_id":68306130010297,"sku":"JBA40-2688","price":644.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/c8d8a1022f140a30fdc7a246e9d96b58_1.jpg?v=1794436156"},{"product_id":"roush-dual-tip-axle-back-exhaust-polished-tip-2024-2026-mustang-gt-ecoboost-422333","title":"Roush Dual Tip Axle Back Exhaust - Polished Tip (2024-2026 Mustang GT \/ EcoBoost) - 422333","description":"\u003cp\u003eThe Roush Dual Tip Axle Back Exhaust, part number 422333, is a bolt-on rear exhaust section built for the current-generation Ford Mustang in both GT and EcoBoost form. It replaces the factory exhaust components from the rear axle back and finishes with dual polished tips. Roush developed this kit to give the latest Mustang a deeper, more aggressive exhaust note and a sportier rear appearance.\u003c\/p\u003e\n\u003cp\u003eFor owners of a 2024-2026 Mustang who want more sound and a cleaner look at the rear without replacing the full exhaust system, this axle-back is a practical upgrade. Roush states that the design improves exhaust flow and is intended to work with the car's existing exhaust setup, which keeps the change focused on the rear section of the system.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAxle-back exhaust configuration\u003c\/li\u003e\n\u003cli\u003eDual tip design with polished tip finish\u003c\/li\u003e\n\u003cli\u003eRoush part number 422333\u003c\/li\u003e\n\u003cli\u003eDeveloped for 2024-2026 Mustang GT and EcoBoost models\u003c\/li\u003e\n\u003cli\u003eProduces a deeper, more aggressive exhaust note than stock, per Roush\u003c\/li\u003e\n\u003cli\u003eDesign intended to improve exhaust flow\u003c\/li\u003e\n\u003cli\u003eEngineered to integrate with the vehicle's existing exhaust setup\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eRoush Axle-Back Construction\u003c\/h3\u003e\u003cp\u003eRoush describes this axle-back as built from high-quality materials with durability and long service life in mind. The manufacturer does not specify the alloy or grade used in the source information provided.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eThe main change drivers will notice is sound. Roush tuned this axle-back to produce a deeper and more aggressive tone than the factory system, giving the Mustang a more noticeable presence on the road.\u003c\/p\u003e\u003cp\u003eRoush also states that the system's design optimizes exhaust flow and contributes to increased horsepower and torque. No specific output figures are published for this kit.\u003c\/p\u003e\u003cp\u003eVisually, the dual polished tips give the rear of the car a sleeker, sportier finish compared with the stock exhaust outlets.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eRoush states the kit is designed to integrate with the vehicle's existing exhaust setup, and the manufacturer describes installation as straightforward.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eYou want a more aggressive exhaust sound from your 2024-2026 Mustang GT or EcoBoost without replacing the full exhaust system.\u003c\/li\u003e\n\u003cli\u003eYou prefer an axle-back that is engineered to work with the factory exhaust components already on the car.\u003c\/li\u003e\n\u003cli\u003eYou want polished dual tips to refresh the rear appearance of your Mustang.\u003c\/li\u003e\n\u003cli\u003eYou want an exhaust upgrade from Roush, a manufacturer closely associated with Mustang performance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2024-2026 Ford Mustang EcoBoost \/ GT\u003c\/li\u003e\n\u003cli\u003e2024-2026 Ford Mustang EcoBoost \/ GT\u003c\/li\u003e\n\u003cli\u003e2024-2026 Ford Mustang EcoBoost \/ GT\u003c\/li\u003e\n\u003cli\u003e2026 Ford Mustang EcoBoost \/ GT\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Roush","offers":[{"title":"Default Title","offer_id":68306130370745,"sku":"RSH422333","price":799.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/1318-5231orrz3-aa_-_mustang_ecoboost_exhaust_2_of_4.jpg?v=1794436155"},{"product_id":"corsa-performance-3-0-dual-rear-exit-sport-axle-back-exhaust-system-polished-4-0-slash-cut-tips-2024-2026-mustang-gt-coupe-w-active-exhaust-21261","title":"Corsa Performance 3.0” Dual Rear Exit Sport Axle-Back Exhaust System - Polished 4.0” Slash Cut Tips (2024-2026 Mustang GT Coupe w\/ Active Exhaust) - 21261","description":"\u003cp\u003eThe Corsa Performance 21261 is a 3.0-inch axle-back exhaust system for the S650-generation Mustang GT with the 5.0L V8 and the factory active valve exhaust. It is a dual rear exit layout finished with polished 4.0-inch Pro-Series tips. It replaces the rear section of the factory exhaust and keeps the car's active valve function.\u003c\/p\u003e\n\u003cp\u003eCorsa rates the system's sound level as Sport to Touring Active, so the character depends on the active valve setting you select. It works only on cars equipped with the active valve exhaust and is designed to run with the factory Active Exhaust Module. That makes it a good fit for GT owners who want a Corsa axle-back with polished dual-wall tips while keeping the adjustability of the factory valve system.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCorsa Performance part number 21261\u003c\/li\u003e\n\u003cli\u003eAxle-back exhaust system\u003c\/li\u003e\n\u003cli\u003e3.0-inch pipe diameter\u003c\/li\u003e\n\u003cli\u003eDual rear exit configuration\u003c\/li\u003e\n\u003cli\u003eQuad tip style with 4.0-inch polished Pro-Series tips\u003c\/li\u003e\n\u003cli\u003eDual-wall tip construction\u003c\/li\u003e\n\u003cli\u003eSound level rated by Corsa as Sport to Touring Active\u003c\/li\u003e\n\u003cli\u003eFor vehicles with active valve exhaust only\u003c\/li\u003e\n\u003cli\u003eInstalls using the factory Active Exhaust Module\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e3.0-Inch Axle-Back with Polished Dual-Wall Tips\u003c\/h3\u003e\u003cp\u003eThe system uses 3.0-inch tubing from the axle rearward to the dual rear exits. Each exit is finished with polished 4.0-inch Pro-Series tips built with dual-wall construction, a design Corsa uses on its tips for a finished, layered appearance at the rear fascia.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eCorsa places this system in its Sport to Touring Active sound range. Because it retains the active valve system through the factory Active Exhaust Module, the driver can still change the exhaust character with the active exhaust settings instead of being locked into one sound.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFits only vehicles equipped with the factory active valve exhaust\u003c\/li\u003e\n\u003cli\u003eThe factory Active Exhaust Module must be used for installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAdds a Corsa 3.0-inch axle-back without giving up the factory active valve exhaust function\u003c\/li\u003e\n\u003cli\u003eSport to Touring Active sound rating lets the active exhaust settings set how loud the car is\u003c\/li\u003e\n\u003cli\u003ePolished 4.0-inch dual-wall Pro-Series tips update the look of the rear of the car\u003c\/li\u003e\n\u003cli\u003eAxle-back design replaces only the rear section of the exhaust\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2024 Ford Mustang GT (5.0L), Fastback\u003c\/li\u003e\u003c\/ul\u003e","brand":"Corsa Performance","offers":[{"title":"Default Title","offer_id":68306131747001,"sku":"COR21261","price":1856.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/21261_a_lowres.jpg?v=1794381167"},{"product_id":"corsa-performance-21039-3-sport-axle-back-exhaust-system-with-4-polished-tips-2018-2023-ford-mustang-gt","title":"Corsa Performance 21039 3\" Sport Axle-Back Exhaust System with 4\" Polished Tips (2018-2023 Ford Mustang GT)","description":"\u003cp\u003eThe Corsa Performance 21039 is a 3.0 inch axle-back exhaust system for the 2018-2023 Ford Mustang GT with the 5.0L V8. It uses a dual rear exit layout with twin 4.0 inch Polished Pro-Series tips, and it is tuned to Corsa's SPORT sound level, which the manufacturer describes as its most popular setting. The system is built for cars that do not have the Active Valve exhaust.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer-stated gains:\u003c\/strong\u003e Corsa states gains of +5 horsepower and +4 torque (torque units not specified by the manufacturer). Corsa notes that actual performance results are not guaranteed and may vary.\u003c\/p\u003e\n\u003cp\u003eCorsa uses its patented RSC Technology to give the car an aggressive tone under acceleration while keeping cruising free of drone. The system is built from premium stainless steel and bolts on without welding, and Corsa includes the hardware and detailed instructions in the kit. Corsa designs, engineers, and manufactures it in Berea, Ohio, and backs it with a Limited Lifetime warranty. That makes it a practical choice for S550 GT owners who want more sound and a cleaner rear view without living with highway drone.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e3.0 inch axle-back exhaust system, Corsa part number 21039\u003c\/li\u003e\n\u003cli\u003eDual rear exit configuration\u003c\/li\u003e\n\u003cli\u003eTwin 4.0 inch Polished Pro-Series tips\u003c\/li\u003e\n\u003cli\u003eSPORT sound level: distinct rumble at idle, aggressive sound through the gears, no drone during cruise\u003c\/li\u003e\n\u003cli\u003ePatented RSC Technology for aggressive sound under acceleration and a drone-free cruise\u003c\/li\u003e\n\u003cli\u003eDesigned for vehicles without Active Valve exhaust\u003c\/li\u003e\n\u003cli\u003eConstructed from premium stainless steel\u003c\/li\u003e\n\u003cli\u003eManufacturer-stated increased air flow of +48.35 percent\u003c\/li\u003e\n\u003cli\u003eManufacturer-stated weight reduction of 4 lbs\u003c\/li\u003e\n\u003cli\u003eBolt-on installation with no welding required\u003c\/li\u003e\n\u003cli\u003eDesigned, engineered, and manufactured in Berea, Ohio\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePremium Stainless Steel Construction\u003c\/h3\u003e\u003cp\u003eCorsa builds its exhaust systems from premium stainless steel, a material chosen for lasting performance, sound, and appearance. The 21039 finishes in twin 4.0 inch Polished Pro-Series tips that exit at the rear in a dual layout.\u003c\/p\u003e\u003cp\u003eCorsa engineers each system around the specific properties of the vehicle it is intended for, with the goal of precise fitment and consistent performance. Design, engineering, and manufacturing all take place at Corsa's facility in Berea, Ohio.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eThe SPORT sound level is Corsa's most popular setting. At idle the system produces a distinct rumble, and it turns aggressive as you run through the gears. Corsa's patented RSC Technology is what lets it stay loud under throttle without drone once you settle into a cruise.\u003c\/p\u003e\u003cp\u003eCorsa rates the system at a 48.35 percent increase in air flow and a 4 lb weight reduction. It lists gains of +5 horsepower and +4 torque, with the caveat that actual results are not guaranteed and may vary.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBolt-on installation\u003c\/li\u003e\n\u003cli\u003eNo welding required\u003c\/li\u003e\n\u003cli\u003eAll hardware and detailed instructions are included in the kit\u003c\/li\u003e\n\u003cli\u003eIntended for vehicles without Active Valve exhaust\u003c\/li\u003e\n\u003cli\u003eCorsa does not recommend or recognize purchase and installation on vehicles other than those the system is specified for\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAdds a more aggressive V8 sound under acceleration while Corsa's RSC Technology keeps cruising drone-free\u003c\/li\u003e\n\u003cli\u003eGives a non-Active Valve Mustang GT a dual rear exit with twin 4.0 inch polished tips\u003c\/li\u003e\n\u003cli\u003eBolts on without welding, with hardware and instructions supplied\u003c\/li\u003e\n\u003cli\u003eCorsa lists a 4 lb weight reduction and a 48.35 percent increase in air flow\u003c\/li\u003e\n\u003cli\u003eStainless steel construction backed by a Limited Lifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2018-2023 Ford Mustang GT (5.0L), Fastback\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e3.0 inch axle-back exhaust system with twin 4.0 inch Polished Pro-Series tips\u003c\/li\u003e\n\u003cli\u003eAll required installation hardware\u003c\/li\u003e\n\u003cli\u003eDetailed installation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eCorsa Limited Lifetime warranty, valid for as long as you own the vehicle, with proof of purchase.\u003c\/p\u003e","brand":"Corsa Performance","offers":[{"title":"Default Title","offer_id":68306132566201,"sku":"COR21039","price":1434.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/21039-2018-2019-ford-mustang-gt-5-0l-v8-3-0-axle-back-exhaust-system-with-twin-4-0-tips-21039-sport-sound-level-axle-back-exhaust-polished-sport-dual-rear-twin-4-0in-11205752389718.jpg?v=1794381170"},{"product_id":"corsa-21002-2018-2023-mustang-gt-3-active-exhaust-axleback-system-with-4-quad-polished-tips-touring-sport","title":"Corsa 21002 2018-2023 Mustang GT 3\" Active Exhaust Axleback System with 4\" Quad Polished Tips (Touring\/Sport)","description":"\u003cp\u003eThe Corsa Performance 3.0 inch Active Exhaust Axle-Back System is a bolt-on rear exhaust for 2018-2023 Mustang GT models equipped with the factory active valve exhaust. It uses a dual rear exit layout finished with 4.0 inch polished Pro-Series tips, 304 stainless steel construction, and Corsa's patented Reflective Sound Cancellation (RSC) technology paired with Corsa-built active valves. Corsa rates the sound level from Touring to Sport: slightly louder than a stock Touring setting, quiet at idle in Touring, and without drone at cruise.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer-stated gains:\u003c\/strong\u003e Corsa states gains of +5 horsepower and +4 torque (torque units not specified). The manufacturer notes that actual performance results are not guaranteed and may vary.\u003c\/p\u003e\n\u003cp\u003eThis system suits Coyote-powered GT owners who want a broader volume range and better flow while keeping highway cruising comfortable and the quiet start function intact. The Corsa valves work with the factory solenoids, so the car's valve control keeps working as designed. Corsa notes the system is a good match for aggressively modified engines where exhaust volume needs to stay under control. It is designed, engineered, and manufactured in Berea, Ohio.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e3.0 inch axle-back design with dual rear exit\u003c\/li\u003e\n\u003cli\u003eTwin 4.0 inch polished Pro-Series tips with dual-wall stainless steel construction\u003c\/li\u003e\n\u003cli\u003e304 stainless steel construction\u003c\/li\u003e\n\u003cli\u003ePatented Reflective Sound Cancellation (RSC) technology for drone-free cruising\u003c\/li\u003e\n\u003cli\u003eCorsa active valves that use the factory solenoids\u003c\/li\u003e\n\u003cli\u003eRetains the factory quiet start function\u003c\/li\u003e\n\u003cli\u003eTouring to Sport sound level: slightly louder than stock Touring and quiet at idle in Touring\u003c\/li\u003e\n\u003cli\u003e11 decibel volume change across the various driving modes\u003c\/li\u003e\n\u003cli\u003eCorsa states flow improves 28 percent over stock with the valves closed and 17 percent with the valves open\u003c\/li\u003e\n\u003cli\u003eRequires the factory active valve exhaust\u003c\/li\u003e\n\u003cli\u003eBolt-on installation with no welding required\u003c\/li\u003e\n\u003cli\u003eMade in the U.S.A. in Berea, Ohio\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e304 Stainless Steel Construction with Corsa-Built Active Valves\u003c\/h3\u003e\u003cp\u003eThe system is built from 304 stainless steel, which Corsa uses across its exhaust lineup for long-term durability, sound, and appearance. The 4.0 inch Pro-Series tips are dual-walled and polished stainless steel.\u003c\/p\u003e\u003cp\u003eCorsa spent more than two years developing its active valve system. After testing several off-the-shelf valves, the company built its own valve and put it through severe heat-cycling tests. Corsa reports no failures at well over half a million cycles. Each Corsa system is engineered for its specific vehicle to achieve proper fitment and performance.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eCorsa's RSC technology is meant to deliver an aggressive tone under acceleration and remove drone while cruising. Combined with the Corsa active valves, Corsa says the system manages cruise drone better than the stock exhaust. You can use the quiet start function for cold starts or run the valves fully open, and the system produces an 11 decibel difference in volume across the driving modes.\u003c\/p\u003e\u003cp\u003eCorsa rates the system from Touring to Sport. It is slightly louder than the stock Touring setting, stays quiet at idle in Touring, and does not drone during cruise. Corsa lists flow gains of 28 percent over stock with the valves closed and 17 percent with the valves open.\u003c\/p\u003e\u003cp\u003eFor more sound and performance, Corsa suggests pairing this axle-back with the Corsa Double X-Pipe, part number 14327. Corsa states that the X-pipe outflows the stock mid-section by 23.43 percent.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBolt-on installation\u003c\/li\u003e\n\u003cli\u003eNo welding required\u003c\/li\u003e\n\u003cli\u003eAll hardware is included\u003c\/li\u003e\n\u003cli\u003eDetailed printed instructions are included, and full-color instructions are available online\u003c\/li\u003e\n\u003cli\u003eRequires a vehicle with the factory active valve exhaust\u003c\/li\u003e\n\u003cli\u003eCorsa does not recommend or recognize installation on vehicles the system was not designed for\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAdds an 11 decibel volume range across driving modes while keeping the quiet start function\u003c\/li\u003e\n\u003cli\u003eRSC technology is designed to eliminate drone at cruise, which helps on long drives\u003c\/li\u003e\n\u003cli\u003eWorks with the factory valve solenoids, so the stock valve control stays functional\u003c\/li\u003e\n\u003cli\u003eStays at a moderate Touring to Sport level, which suits heavily modified engines where volume needs to be controlled\u003c\/li\u003e\n\u003cli\u003eBuilt from 304 stainless steel with Corsa-developed valves that were tested beyond half a million heat cycles\u003c\/li\u003e\n\u003cli\u003eBolt-on installation with no welding and all hardware included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2018-2023 Ford Mustang GT (5.0L), Fastback\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAxle-back exhaust system with active valves\u003c\/li\u003e\n\u003cli\u003e4.0 inch polished Pro-Series tips\u003c\/li\u003e\n\u003cli\u003eAll mounting hardware\u003c\/li\u003e\n\u003cli\u003eDetailed printed installation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eLimited Lifetime warranty on the exhaust for as long as you own the vehicle, with proof of purchase. The valves are covered for 5 years.\u003c\/p\u003e","brand":"Corsa Performance","offers":[{"title":"Default Title","offer_id":68306133385401,"sku":"COR21002","price":2065.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/14327-2015-2019-ford-mustang-gt-3-0-double-helixx-x-pipe-14327-x-pipe-744519663632_cf64dcdd-fb73-4894-96e3-d58583dcc4eb.jpg?v=1794381173"}],"url":"https:\/\/engmustangs.com\/collections\/mustang-axle-back-exhaust.oembed?page=5","provider":"ENG Mustangs","version":"1.0","type":"link"}